Shark S4701D Vacuum Cleaner Manual

The Shark S4701D is a powerful upright vacuum cleaner featuring DuoClean technology, Anti-Allergen Complete Seal, LED headlights, a large-capacity dust cup, swivel steering, multiple cleaning modes, and a variety of attachments for versatile floor-to-ceiling cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: DuoClean floor nozzle, Anti-Allergen Complete Seal filtration, LED headlights, large dust cup, swivel steering handle, hose and wand, and accessory storage.

Feature	Description
DuoClean Technology	Dual brush rolls for carpets and hard floors
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
LED Headlights	Illuminates dark areas under furniture
Large Dust Cup	Easy-empty, bagless design
Swivel Steering	Maneuvers easily around furniture and obstacles
Cleaning Modes	Adjusts suction for different surfaces
Accessory Storage	Integrated storage for hose and attachments
ON/OFF Power Switch	Controls vacuum power
Brush Roll Control	Engages/disengages brush roll for hard floors
Height Adjustment	Adapts to different carpet pile heights

Assembly & Setup

Unpack and inspect all components. Assemble according to instructions.

Attach handle: Insert handle into vacuum body until it clicks into place.
Install wand: Insert wand into hose connector until secure.
Attach floor nozzle: Connect floor nozzle to wand or hose end.
Store accessories: Place attachments in onboard storage caddy.
Plug into electrical outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Before first use, ensure all parts are securely assembled.

Clear area: Remove large debris or obstacles from floor.
Select mode: Choose appropriate cleaning mode for surface (carpet/hard floor).
Adjust height: Set floor nozzle height for carpet pile.
Begin vacuuming: Turn on power switch and push vacuum forward.
Empty dust cup: After use, empty dust cup into trash.

CAUTION! Do not vacuum wet spills, large objects, or hot ashes.

Specifications

Model: Shark S4701D.
Technology: DuoClean with Anti-Allergen Complete Seal.
Filtration:HEPA filter included.

Dust Cup Capacity: 1.5 quarts.

Cord Length: 25 feet.

Attachments: Crevice tool, dusting brush, upholstery tool, pet multi-tool.

Power Source: 120V AC, 60Hz.

Weight: 15 lbs.

Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and vacuum body.

Handle: Power switch, brush roll on/off, suction control. Body: Dust cup release, hose release, height adjustment lever.

Cleaning Modes: Carpet mode (brush roll on), Hard Floor mode (brush roll off), Boost mode (increased suction). Settings: Height adjustment (low/medium/high), suction control (low/medium/high).

Using Attachments

Attachments stored on vacuum for above-floor cleaning.

Remove wand: Detach wand from floor nozzle.

Connect hose: Attach hose to wand or directly to vacuum.

Select tool: Choose appropriate attachment (crevice, brush, etc.).

Attach tool: Click tool onto end of hose or wand.

Begin cleaning: Turn on vacuum and use tool as needed.

Tip: Use crevice tool for tight spaces; dusting brush for shelves; upholstery tool for furniture.

Cleaning Modes

Optimize cleaning for different surfaces.

Carpet Mode: Brush roll engaged for deep carpet cleaning.

Hard Floor Mode: Brush roll disengaged to prevent scattering debris.

Boost Mode: Maximum suction for concentrated areas.

Adjust height: Use lever to match carpet pile (low for thin, high for thick).

WARNING! Do not run vacuum in Hard Floor Mode on carpets, as it may damage brush roll.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: After each use or when full.

Clean filters: Rinse HEPA and pre-motor filters monthly (air dry completely).

Clear brush roll: Remove hair and debris from brush roll regularly.

Check for blockages: Inspect hose, wand, and nozzles for clogs.

Store properly: Wind cord, store attachments, and keep in dry area.

CAUTION! Unplug vacuum before maintenance. Ensure filters are completely dry before reinserting.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2023 SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom Possible Cause Corrective Action

Vacuum won't turn on Power cord/outlet Check plug connection; try different outlet; ensure power switch is on.

Loss of suction Full dust cup/clog Empty dust cup; check filters; clear blockages in hose/nozzle.

Brush roll not spinning Engagement switch/hair wrap Ensure brush roll is engaged; remove hair/debris from brush roll.

Vacuum overheating Blockage/continuous use Clear any clogs; allow vacuum to cool for 30 minutes.

Unusual noise Foreign object in brush roll Turn off and unplug; inspect and remove object from brush roll or hose.

Reset: Unplug for 30 minutes to reset thermal protector.

Service: 1-800-798-7398; www.sharkclean.com

Shark S4701D Vacuum Cleaner Manual © - All Rights Reserved 2025

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug connection; try different outlet; ensure power switch is on.
Loss of suction	Full dust cup/clog	Empty dust cup; check filters; clear blockages in hose/nozzle.
Brush roll not spinning	Engagement switch/hair wrap	Ensure brush roll is engaged; remove hair/debris from brush roll.
Vacuum overheating	Blockage/continuous use	Clear any clogs; allow vacuum to cool for 30 minutes.
Unusual noise	Foreign object in brush roll	Turn off and unplug; inspect and remove object from brush roll or hose.