Shark S4601 Series Vacuum Cleaner Manual

The Shark S4601 Series is a versatile upright vacuum cleaner designed for powerful deep cleaning on carpets and hard floors. It features advanced DuoClean technology, Anti-Allergen Complete Seal, LED headlights, a large-capacity dust cup, and multiple cleaning modes. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Cleaning Modes & Attachments 7. Maintenance & Cleaning 8. Storage & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: DuoClean brush roll, LED headlights, Anti-Allergen Complete Seal system, large dust cup, handle controls, power cord, and accessory storage.

Feature	Description
DuoClean Technology	Combines bristle brush and soft roller for carpets and hard floors
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
LED Headlights	Illuminates hidden debris under furniture
Large Dust Cup	Easy-empty, 1.2-quart capacity
Cleaning Modes	Upright, handheld, and above-floor cleaning
Power Cord	25-foot retractable cord
Accessory Storage	Integrated caddy for crevice tool and dusting brush
Handle Controls	Power switch, brush roll on/off, suction control
Wand Release	Quick-release button for converting to handheld
Wheels	Large rear wheels for easy maneuverability

Assembly & Setup

Unpack and inspect all contents. Assemble on a flat surface.

Attach the handle: Align handle with body until it clicks into place.
Install the wand: Insert wand into handle until secure.
Attach cleaning hose: Connect hose to wand and body ports.
Install accessories: Store crevice tool and dusting brush in caddy.
Plug into a standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; follow these steps for initial operation.

Select floor type: Use brush roll on for carpets; turn off for hard floors.
Adjust suction: Use handle control for high/low suction as needed.
Begin cleaning: Push vacuum forward and back in slow, overlapping strokes.
Empty dust cup: Press release button and empty when full.

CAUTION! Keep hair, loose clothing, and fingers away from brush roll. Do not vacuum liquids.

Specifications

Model: Shark S4601 Series.
Power: 120V AC, 60Hz, 10 Amps.
Cord Length: 25 feet retractable.
Dust Cup Capacity: 1.2 quarts.
Filtration: Anti-Allergen Complete Seal with HEPA filter.
Cleaning Path: 10 inches wide.
Weight: 14.5 lbs.
Warranty: 5-year limited warranty.
Operating Temp: 40°F to 104°F (4°C to 40°C).

Controls and Settings

Access controls via handle. Power Switch: Turns vacuum on/off. Brush Roll Switch: Enables/disables brush roll for carpets/hard floors. Suction Control: Adjusts suction power (High/Low).

Additional Features: Wand Release button, Dust Cup Release, Cord Rewind pedal. Settings: Upright mode for floors, Handheld mode for above-floor cleaning, Accessory mode for tools.

Cleaning Modes & Attachments

Upright Mode: For carpets and hard floors. Handheld Mode: Detach wand for stairs and furniture. Above-Floor Cleaning: Use hose with attachments.

Convert to handheld: Press wand release button and detach.
Attach tools: Connect crevice tool or dusting brush to hose.
Select suction: Use handle control for appropriate power.

Tip: Use crevice tool for corners; dusting brush for delicate surfaces.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty after each use.
Clean filters: Rinse pre-motor and HEPA filters monthly (air dry 24 hours).
Clear brush roll: Remove debris from brush roll weekly.
Check hose: Remove clogs with long object if suction decreases.
Inspect cord: Ensure cord is undamaged; rewind after use.

WARNING! Unplug before maintenance. Do not use damaged filters.

Storage & Care

Store in a cool, dry place. Use cord wrap for neat storage.

CAUTION! Do not store with wet filters. Keep away from heat sources.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2023 SharkNinja Operating LLC; trademarks of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power source/switch	Check outlet; ensure power switch is on; inspect cord.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose and brush roll for clogs.
Brush roll not spinning	Debris/switch	Clear debris from brush roll; ensure brush roll switch is on.
Overheating	Clogged filters	Clean filters; allow vacuum to cool for 60 minutes.
Unusual noise	Foreign object	Turn off and unplug; inspect for objects in brush roll or hose.

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; www.sharkclean.com