Shark S3501 Series Vacuum Cleaner Manual

The Shark S3501 Series is a versatile upright vacuum cleaner featuring powerful suction, a Lift-Away canister mode, Anti-Allergen Complete Seal Technology with a HEPA filter, a motorized brushroll for carpets and hard floors, multiple cleaning modes, and a variety of attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Dust Cup, Handle with controls, Hose, Wand, Motorized Floor Nozzle, and various cleaning attachments.

Feature	Description
Lift-Away Technology	Detachable canister for portable cleaning above floors
Anti-Allergen Complete Seal	Sealed system with HEPA filter to trap dust and allergens
Motorized Brushroll	Automatically adjusts between carpets and hard floors
Cleaning Modes	Upright, Lift-Away, Handheld, and Bare Floor modes
Dust Cup	Large capacity, easy-empty container
Power Cord	Long length for extended reach
ON/OFF Switch	Controls main vacuum power
Brushroll On/Off	Switch to disable brushroll for delicate rugs
Suction Control	Adjusts suction power for different surfaces
Attachments	Includes crevice tool, dusting brush, upholstery tool

Assembly & Setup

Unpack all parts and inspect contents. Assemble on a clean, flat surface.

Attach the Handle: Align the handle with the main body and push until it clicks into place.
Connect the Hose: Insert the hose end into the port on the vacuum body and twist to lock.
Attach the Wand: Insert the wand into the top of the hose until it clicks.
Attach Floor Nozzle: Connect the motorized floor nozzle to the bottom of the wand.
Plug into AC power outlet.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from moving parts.

First-Time Use

Before first use, ensure filters are installed and dust cup is empty.

Check Filters: Ensure both the pre-motor and HEPA filters are correctly seated.
Select Mode: Choose Upright mode for floor cleaning or Lift-Away for above-floor tasks.
Adjust Settings: Set Brushroll On/Off and Suction Control as needed for your floor type.
Begin Cleaning: Press the ON/OFF switch and push vacuum forward on floor.

CAUTION! Do not vacuum wet spills, large objects, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Model Series: S3501.
Technology: Lift-Away, Anti-Allergen Complete Seal.
Filtration: HEPA filter, pre-motor foam filter.
Dust Cup Capacity: [e.g., 1.5 quarts].
Cord Length: [e.g., 25 feet].
Cleaning Modes: Upright, Lift-Away, Handheld, Bare Floor.
Attachments Included: Crevice tool, dusting brush, upholstery tool, pet multi-tool.
Power Source: 120V AC, 60Hz.
Warranty: Limited [e.g., 5-year] warranty.

Controls and Settings

Main controls located on handle and body.

Handle: ON/OFF switch, Suction Control slider, Brushroll On/Off button.

Body: Lift-Away release button, Dust Cup release latch, Hose release button.

Settings: Suction Control (High/Low for different surfaces), Brushroll (On for carpets, Off for hard floors/delicate rugs), Mode selector (Upright or Lift-Away).

Using Attachments

For above-floor cleaning: stairs, furniture, ceilings, tight spaces.

Activate Lift-Away Mode: Press release button to detach canister.
Select Attachment: Choose appropriate tool (crevice, brush, etc.).
Connect: Attach tool to end of wand or directly to hose.
Clean: Use ON/OFF switch on canister handle to control suction.

Tip: Use the dusting brush for delicate surfaces and the crevice tool for edges and corners.

Cleaning Modes

Switch between modes for different cleaning tasks.

Upright Mode: For full-size floor cleaning. Attach floor nozzle to wand.
Lift-Away Mode: Detach canister for portable cleaning. Carry by handle.
Handheld Mode: Remove wand and use hose with attachment for quick spot cleaning.
Bare Floor Mode: Turn brushroll OFF when cleaning hard surfaces.

WARNING! Ensure vacuum is turned OFF before switching modes or changing attachments.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

Empty Dust Cup: Press release latch, remove cup, and empty contents into trash.
Clean Filters: Rinse pre-motor foam filter monthly; replace HEPA filter every 12 months.
Clear Brushroll: Regularly remove hair and debris wrapped around brushroll.
Check for Blockages: Inspect hose, wand, and nozzle if suction decreases.

CAUTION! Unplug vacuum before performing any maintenance. Allow filters to dry completely before reinstalling.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clogged filter or hose	Empty dust cup; check and clean filters; clear hose/wand blockages.
Brushroll not spinning	Brushroll turned off, debris jam	Ensure Brushroll is ON; clear debris from brushroll ends.
Vacuum won't turn on	Power cord not plugged in, ON/OFF switch issue	Check power connection; ensure switch is pressed firmly.
Canister won't detach	Lift-Away release not fully engaged	Press release button firmly while lifting canister.
Unusual noise	Foreign object in brushroll or hose	Turn off and unplug; inspect brushroll, hose, and nozzle for obstructions.

Reset: Unplug vacuum for 60 seconds, then plug back in.

Service: 1-800-798-7398; sharkclean.com