Shark S3101UKJR Vacuum Cleaner Manual

The Shark S3101UKJR is a versatile upright vacuum cleaner designed for powerful suction and deep carpet cleaning. It features a Lift-Away mode for portable cleaning, an Anti-Allergen Complete Seal with HEPA filter, a motorized brushroll for carpets and hard floors, multiple attachments for above-floor cleaning, and a large-capacity dust cup. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Lift-Away pod, motorized brushroll, dust cup with HEPA filter, crevice tool, dusting brush, upholstery tool, and wand.

Feature	Description
Lift-Away Mode	Detachable pod for portable cleaning above floors
Anti-Allergen Complete Seal	Sealed system with HEPA filter to trap 99.9% of dust and allergens
Motorized Brushroll	Deep cleans carpets and automatically adjusts for hard floors
Large Capacity Dust Cup	Easy-empty, no bags required
Fingertip Controls	On/off, brushroll on/off, and suction settings on handle
LED Headlights	Illuminates dark areas under furniture
Wand Release Pedal	Foot pedal to detach wand for above-floor cleaning
Attachments Storage	Caddy on back holds crevice tool, dusting brush, and upholstery tool
Power Cord	25-foot cord with cord wrap
Wheels	Large rear wheels for easy maneuverability

Assembly & Setup

Unpack and inspect all parts. Assemble on a flat surface.

Attach the handle: Insert handle into top of vacuum body until it clicks into place.
Install the wand: Insert wand into hose port on front of vacuum.
Attach floor nozzle: Connect floor nozzle to wand until it clicks securely.
Install attachments: Store crevice tool, dusting brush, and upholstery tool in caddy on back.
Check filters: Ensure pre-motor and post-motor HEPA filters are properly seated.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug into a standard 120V outlet; turn on using handle switch.

Select cleaning mode: Use upright mode for floors; press Lift-Away release for portable cleaning.
Adjust suction: Use handle controls for maximum suction (carpets) or reduced suction (delicate rugs).
Engage brushroll: Ensure brushroll is on for carpets; turn off for hard floors or area rugs.
Empty dust cup: After first use, check and empty dust cup to maintain suction.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

Model: Shark S3101UKJR.
Type: Upright vacuum with Lift-Away.
Suction Power: High-performance motor with adjustable settings.
Filtration: Anti-Allergen Complete Seal with HEPA filter.
Dust Cup Capacity: 1.2 dry quarts.
Cord Length: 25 feet.
Attachments: Crevice tool, dusting brush, upholstery tool, wand.
Weight: 14.5 lbs.
Power Source: 120V AC, 60Hz.
Warranty: 5-year limited warranty.

Controls and Settings

Handle Controls: POWER (On/Off), BRUSHROLL (On/Off), SUCTION (Max/Reduced).

Body Controls: Lift-Away release button, dust cup release, wand release pedal, cord wrap hooks.

Upright Mode: For floor cleaning. Lift-Away Mode: Press release button to detach pod for stairs, furniture, and above-floor cleaning. Brushroll Settings: ON for carpets; OFF for hard floors or delicate rugs. Suction Settings: MAX for deep cleaning; REDUCED for lightweight rugs or drapes.

Using Attachments

Detach wand using foot pedal; connect desired attachment.

Crevice Tool: For tight spaces, corners, and along edges.
Dusting Brush: For delicate surfaces, blinds, shelves, and electronics.
Upholstery Tool: For sofas, chairs, curtains, and car interiors.
Wand: Extends reach for ceilings, high shelves, and under furniture.

Tip: Ensure vacuum is in Lift-Away mode or wand is detached for above-floor cleaning.

Cleaning Modes

Supports upright floor cleaning and portable Lift-Away cleaning.

Upright Mode: Use for carpets and hard floors; engage brushroll as needed.
Lift-Away Mode: Press release button; carry pod for stairs, furniture, and cars.
Above-Floor Cleaning: Detach wand; attach tool; use handheld.
Hard Floor Setting: Turn brushroll off to prevent scattering debris.
Under-Furniture Cleaning: Use LED lights to see under low-clearance furniture.

WARNING! Do not vacuum wet spills, large objects, or hot ashes. Unplug before changing modes.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty when cup is full.
Clean filters: Rinse pre-motor foam filter monthly; replace HEPA filter every 12-18 months.
Clear brushroll: Remove hair and debris from brushroll regularly.
Check for blockages: Inspect hose, wand, and nozzle for clogs.
Store properly: Wrap cord; store attachments in caddy; keep in dry area.

CAUTION! Unplug before maintenance. Allow filters to dry completely before reinserting.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup or clog	Empty dust cup; check hose, wand, and nozzle for blockages.
Brushroll not spinning	Hair/debris wrap or belt issue	Clear brushroll of obstructions; check belt for wear.
Vacuum won't turn on	Power cord or outlet issue	Ensure plug is secure; check outlet; inspect cord for damage.
Overheating	Clogged filter or full dust cup	Clean filters; empty dust cup; allow to cool for 45 minutes.
Strange noise	Foreign object in brushroll or motor	Unplug; remove object from brushroll or intake.

Reset: Unplug for 45 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com