Shark S1215C Vacuum Cleaner Manual

The Shark S1215C is an upright vacuum cleaner featuring powerful suction, a HEPA filtration system, a motorized brushroll for deep carpet cleaning, multiple height adjustments, a large-capacity dust cup, crevice tool, upholstery tool, and a telescoping wand. It is designed for residential use on carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright body with motorized brushroll, Telescoping wand, Crevice tool, Upholstery tool, Dust cup with HEPA filter, Power cord, On/Off switch, Carpet height adjustment lever.

Feature	Description
Motorized Brushroll	Deep cleans carpets and agitates embedded dirt
HEPA Filtration System	Traps 99.9% of dust and allergens
Carpet Height Adjustment	Multiple settings for different carpet pile heights
Large Capacity Dust Cup	Easy-empty bin for less frequent emptying
Telescoping Wand	Extends for above-floor cleaning
Crevice Tool	Cleans tight spaces and corners
Upholstery Tool	For furniture and stair cleaning
On/Off Switch	Powers the vacuum on and off
Power Cord	Long cord for extended reach
Wheels	Easy maneuverability across floors

Assembly & Setup

Unpack and inspect all parts. Assemble on a flat, stable surface.

Attach the handle: Align the handle with the body and push down until it clicks into place.
Install the telescoping wand: Insert the wand into the designated port on the vacuum body.
Attach cleaning tools: Clip the crevice tool and upholstery tool onto the storage clips.
Unwrap the power cord: Fully unwind the cord from the cord wrap.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug in the vacuum and turn it on to begin cleaning.

Adjust carpet height: Set the height adjustment lever to match your floor type (low for bare floors, high for thick carpets).
Begin vacuuming: Push the vacuum forward and back in slow, overlapping strokes.
Use attachments: For above-floor cleaning, detach the wand and attach the desired tool.
Empty dust cup: Press the release button to remove and empty the dust cup when full.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from the brushroll.

Specifications

Model: Shark S1215C Upright Vacuum.
Power: 120V, 60Hz, 10 Amps.
Filtration: HEPA filter, washable.
Dust Cup Capacity: 1.5 liters.
Cord Length: 25 feet.
Weight: 15 lbs.
Brushroll Type: Motorized, anti-hair wrap.
Warranty: 5-year limited warranty.
Attachments Included: Crevice tool, upholstery tool, telescoping wand.

Controls and Settings

Main controls located on the handle and body. Handle: On/Off switch. Body: Carpet height adjustment lever, Dust cup release button, Brushroll on/off switch (for hard floors).

Settings: Carpet height (Low, Medium, High, Bare Floor). Brushroll on/off for transitioning between carpets and hard floors. Power cord rewind button.

Operation: Plug in, turn on with foot switch or handle button. Adjust height as needed. Turn off brushroll for delicate rugs or hard floors.

Using Attachments

For above-floor cleaning: Detach wand, attach tool.

Turn off and unplug the vacuum.
Press the wand release button and pull the wand out.
Attach the crevice tool for corners and edges, or the upholstery tool for furniture.
Plug in and turn on to use the attachment.

Tip: Store attachments on the vacuum body for easy access.

Cleaning Modes

Supports carpet cleaning, hard floor cleaning, and above-floor cleaning.

Carpet mode: Set height to appropriate setting; brushroll on.
Hard floor mode: Set height to lowest setting; turn brushroll off if desired.
Above-floor mode: Use wand and attachments for furniture, stairs, and ceilings.
Spot cleaning: Use the handheld mode with the upholstery tool for small spills and stains.

WARNING! Do not use the vacuum to pick up sharp objects, which can damage the dust cup or hose.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Empty after each use or when full.
Clean filters: Wash HEPA filter every 3 months (air dry completely).
Check brushroll: Remove tangled hair and debris regularly.
Inspect hose and wand: Clear any blockages.
Store properly: Wrap cord, store in a dry place.

CAUTION! Unplug before performing any maintenance. Do not use water on electrical parts.

Safety Information

Read all instructions before use. Keep away from children. Do not use outdoors or on wet surfaces. Do not vacuum flammable materials. Unplug when not in use.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup or clog	Empty dust cup; check hose and wand for blockages.
Brushroll not spinning	Tangled debris or belt	Turn off, unplug, and clear brushroll; check belt for wear.
Vacuum shuts off	Overheating or clog	Unplug, let cool for 30 minutes; clear any clogs.
Unusual noise	Foreign object in brushroll or hose	Turn off, unplug, and inspect brushroll and hose.
Power cord not retracting	Tangled or damaged cord	Unplug, manually rewind cord; inspect for damage.

Reset: Unplug for 30 minutes to reset thermal protector.

Service: 1-800-798-7398; www.sharkclean.com