Shark S1209 Vacuum Cleaner Manual

The Shark S1209 is a versatile upright vacuum cleaner featuring powerful suction, a HEPA filtration system, multiple cleaning modes (carpet, hard floor, above-floor), motorized brushroll, LED headlights, large-capacity dust cup, washable filters, and a lightweight yet durable design. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motorized brushroll, Handle with controls, Dust cup with HEPA filter, Hose with wand, Cleaning attachments (crevice tool, dusting brush, upholstery tool).

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach handle: Insert handle into main body until it clicks securely.
2. Connect hose: Attach hose to port on front of vacuum; ensure tight connection.
3. Insert wand: Slide wand into hose cuff until it locks.
4. Attach cleaning tools: Store tools on onboard caddy or attach directly to wand as needed.
5. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers clear of moving parts.

First-Time Use

Plug in vacuum; select appropriate cleaning mode.

1. Select floor type: Use mode selector switch (CARPET for carpets, HARD FLOOR for hard surfaces).
2. Adjust height (if applicable): Some models have adjustable suction settings.
3. Turn on: Press power button; LED lights will illuminate.
4. Begin cleaning: Push vacuum forward and back in overlapping strokes.
5. Empty dust cup: Press release button to remove and empty when full.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

• Model: Shark S1209 Upright Vacuum.
• Power: 120V AC, 60Hz, 10 Amps.
• Filtration: HEPA filter with washable pre-motor and post-motor filters.
• Dust Cup Capacity: 1.2 dry quarts.
• Cord Length: 25 feet.
• Attachments: Crevice tool, dusting brush, upholstery tool.
• Weight: 12.5 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle. Power Button: Turns vacuum on/off. Brushroll Switch: Turns brushroll on (for carpets) or off (for hard floors/delicate rugs). Mode Selector: CARPET, HARD FLOOR, ABOVE-FLOOR (for attachments). Handle Release: Press button to detach handle for handheld use. Wand Release: Button to detach wand.

LED Indicators: Lights illuminate when powered on; may flash if blockage detected.

Cleaning Modes & Attachments

CARPET Mode: Activates brushroll for deep cleaning. HARD FLOOR Mode: Deactivates or reduces brushroll speed. ABOVE-FLOOR Mode: For use with hose and attachments.

1. For stairs/upholstery: Detach handle, connect hose and desired tool.
2. For crevices: Use crevice tool.
3. For dusting: Use dusting brush.
4. For ceilings/corners: Attach extension wand.

Tip: Regularly check brushroll for tangled hair or fibers and clean as needed.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Empty dust cup: After each use or when full.
2. Clean filters: Wash pre-motor and HEPA filter every 3 months (air dry completely before reinserting).
3. Clear brushroll: Remove debris and hair from brushroll monthly.
4. Check for blockages: Inspect hose, wand, and nozzle if suction decreases.
5. Inspect belt (if applicable): Replace if worn or damaged.

WARNING! Always unplug vacuum before performing maintenance. Do not use damaged parts.

Storage & Care

Store in a cool, dry place. Wrap cord around cord hooks. Empty dust cup and clean filters before long-term storage.

CAUTION! Do not store vacuum with wet filters. Keep away from heat sources and direct sunlight.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 45 minutes to reset thermal protector.

Service: 1-800-798-7398; www.sharkclean.com