Shark RV900 Series Vacuum Cleaner Manual

The Shark RV900 Series is a high-performance robotic vacuum cleaner featuring smart navigation, powerful suction, self-emptying base, Wi-Fi connectivity, multi-surface cleaning, and voice control compatibility. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Configuration 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi and App 7. Cleaning Modes and Scheduling 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Robotic vacuum, Self-Emptying Base, Charging Dock, Remote Control, Side Brushes, HEPA Filter, Dust Bin.

FeatureDescription
Smart NavigationLaser mapping and room recognition for efficient cleaning
Self-Emptying BaseAutomatically empties dust bin into disposable bag
Wi-Fi ConnectivityConnects to SharkClean app for remote control
Multi-Surface CleaningAutomatically adjusts suction for carpets and hard floors
Voice ControlWorks with Amazon Alexa and Google Assistant
Boundary StripsVirtual no-go zones to restrict cleaning areas
Auto-RechargeReturns to base when battery is low
HEPA FiltrationCaptures 99.97% of dust and allergens
Spot CleaningIntensive cleaning of concentrated areas
Edge CleaningSpecial mode for cleaning along walls and edges

Unpacking and Setup

Unpack and inspect all contents. Place on level surface.

  1. Install Side Brushes: Attach to bottom of robot until they click into place.
  2. Position Base: Place charging dock against wall with 3 feet clearance on each side.
  3. Connect Power: Plug base into standard 120V AC outlet.
  4. Charge Robot: Place robot on dock; ensure charging indicators light up.
  5. Install Boundary Strips: Place magnetic strips to create no-go zones if needed.

WARNING! Keep away from stairs and high thresholds. Remove small objects and cords from floor before first use.

First-Time Configuration

Power on robot; follow initial setup prompts.

  1. Initial Charge: Allow robot to charge fully (approx. 4 hours) before first cleaning.
  2. Download App: Install SharkClean app from App Store or Google Play.
  3. Create Map: Run first cleaning cycle to allow robot to map your home.
  4. Name Rooms: Use app to label rooms on the created map.
  5. Set Preferences: Configure cleaning power, schedule, and no-go zones.

CAUTION! Ensure base is on a hard, level surface and not on carpet.

Specifications

Controls and Settings

Access controls via physical buttons, remote, or SharkClean app.

Robot Buttons: CLEAN (start/pause), HOME (return to dock), SPOT (spot clean).

Remote: Directional arrows, CLEAN, DOCK, SPOT, MAX, ECO.

App Features: Schedule cleaning, select rooms, view cleaning history, set no-go zones, adjust suction, check filter status, firmware updates.

Cleaning Modes: Auto (whole house), Room Select, Zone Clean, Edge Clean.

Connecting to Wi-Fi and App

Connect robot to home network for full functionality.

  1. Ensure robot is on dock and powered on.
  2. Open SharkClean app and create account.
  3. Follow in-app instructions to connect to 2.4GHz Wi-Fi network.
  4. Name your robot (e.g., "Living Room Robot").
  5. Allow initial map creation during first cleaning cycle.

Tip: For best connectivity, place base station within range of your Wi-Fi router.

Cleaning Modes and Scheduling

Multiple cleaning options for customized cleaning.

  1. Auto Clean: Cleans entire mapped area automatically.
  2. Room Select: Choose specific rooms to clean via app.
  3. Zone Clean: Draw rectangle on map for concentrated cleaning.
  4. Edge Clean: Special mode for cleaning along walls and edges.
  5. Spot Clean: Intensive 2x2 foot area cleaning.
  6. Schedule: Set daily/weekly cleaning times via app.
  7. Voice Control: Use "Alexa, ask Shark to start cleaning" or similar commands.

WARNING! Always check area for pet accidents, liquids, or large objects before cleaning.

Maintenance and Care

Regular maintenance ensures optimal performance.

  1. Empty Dust Bin: After each cleaning or when indicator lights.
  2. Clean Brushes: Remove hair and debris from main brush weekly.
  3. Replace Side Brushes: Every 6-12 months or when worn.
  4. Clean Sensors: Wipe sensors and charging contacts with dry cloth monthly.
  5. Replace Filter: Every 3 months for optimal performance.
  6. Replace Base Bag: When full indicator lights (approx. every 30 days).
  7. Clean Wheels: Remove debris from wheels and axles monthly.

CAUTION! Unplug base before performing any maintenance. Use only Shark-approved replacement parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398. Wi-Fi module FCC ID: 2ABXJ-SHARKRV900. This device complies with part 15 of the FCC Rules.

Troubleshooting

SymptomPossible CauseCorrective Action
Robot won't startLow battery/not on dockPlace on charging dock; ensure power is connected to base.
Poor navigationDirty sensors/obstaclesClean sensors with dry cloth; clear floor of obstacles.
App connection failedWi-Fi issuesEnsure 2.4GHz network; restart robot and router; reinstall app.
Weak suctionFull dust bin/clogEmpty dust bin; check for clogs in brush and air path.
Not returning to baseBlocked path/low batteryClear path to base; ensure base is powered and in open area.
Error beepsBrush jammed/wheels stuckCheck for tangled hair/debris; clean brushes and wheels.
Map not savingFirmware/connectionUpdate firmware via app; ensure strong Wi-Fi during mapping.

Reset: Hold CLEAN and DOCK buttons for 10 seconds to factory reset.

Service: 1-800-798-7398; www.sharkclean.com/support

Shark RV900 Series Vacuum Cleaner Manual © - All Rights Reserved 2025