Shark RV772 Vacuum Cleaner Manual

The Shark RV772 is a versatile robotic vacuum cleaner designed for automatic floor cleaning with smart navigation, multi-surface cleaning capabilities, Wi-Fi connectivity for app control, self-charging functionality, and advanced dustbin management. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Configuration 4. Technical Specifications 5. Controls and Operation 6. Smart App Connectivity 7. Cleaning Modes and Scheduling 8. Maintenance and Care 9. Safety Information 10. Regulatory Compliance 11. Troubleshooting Guide

Features at a Glance

Key components: Robotic vacuum unit, charging dock, remote control, side brushes, HEPA filter, dustbin, and power adapter.

Feature	Description
Smart Navigation	Uses sensors to map rooms and avoid obstacles
Multi-Surface Cleaning	Automatically adjusts between carpets and hard floors
Wi-Fi Connectivity	Control via SharkClean app on smartphone
Self-Charging	Returns to dock when battery is low
HEPA Filtration	Captures 99.9% of dust and allergens
Side Brushes	Reaches edges and corners effectively
Dustbin Full Sensor	Alerts when bin needs emptying
Voice Control	Works with Amazon Alexa and Google Assistant
Spot Cleaning Mode	Focuses on concentrated dirt areas
Boundary Strips	Optional magnetic strips to restrict areas

Unpacking and Setup

Unpack and inspect all components. Place charging dock in permanent location.

Install side brushes: Attach to bottom of unit until they click into place.
Position charging dock: Place against wall with at least 3 feet clearance on each side.
Charge the vacuum: Connect dock to power outlet, place vacuum on dock for initial charge.
Install HEPA filter: Insert into dustbin compartment before first use.

WARNING! Keep charging dock away from stairs and heat sources. Ensure area is clear of loose cables.

First-Time Configuration

Power on vacuum; follow setup prompts.

Initial charge: Allow 4 hours for full battery charge before first use.
Connect to Wi-Fi: Download SharkClean app, follow in-app instructions to connect.
Test navigation: Press CLEAN button to start initial cleaning cycle.
Set preferences: Configure cleaning modes and schedule via app or remote.

CAUTION! Remove small objects and loose cords from floor before first run.

Technical Specifications

Model: Shark RV772 Robotic Vacuum.
Power Source: Rechargeable lithium-ion battery.
Run Time: Up to 90 minutes per charge.
Charging Time: Approximately 4 hours.
Dustbin Capacity: 0.6 liters.
Filtration: HEPA filter system.
Connectivity: 2.4GHz Wi-Fi, Bluetooth.
Noise Level: 65 dB (standard mode).
Weight: 7.5 lbs (3.4 kg).
Compatibility: iOS 11+/Android 7+ for app control.

Controls and Operation

Control via physical buttons, remote control, or smartphone app.

Unit Buttons: POWER, CLEAN, SPOT, DOCK.

Remote: POWER, CLEAN, SPOT, DOCK, SCHEDULE, MAX, directional arrows.

Cleaning Modes: AUTO (smart navigation), SPOT (concentrated cleaning), MAX (deep clean), EDGE (focus on perimeters). Scheduling: Set daily/weekly schedules via app. Settings: Adjust suction power, enable/disable side brushes, set no-go zones.

Smart App Connectivity

SharkClean app provides full control and monitoring.

Download app from Apple App Store or Google Play Store.
Create account and add device using QR code on vacuum.
Features: Start/stop cleaning, view cleaning history, adjust settings, receive notifications.
Voice control setup: Link to Alexa or Google Assistant in app.

Tip: Ensure 2.4GHz Wi-Fi network is available during setup.

Cleaning Modes and Scheduling

Multiple modes for different cleaning needs.

AUTO Mode: Default smart cleaning with room mapping.
SPOT Mode: Cleans 3x3 foot area intensively.
MAX Mode: Maximum suction for carpets.
EDGE Mode: Focuses on walls and corners.
Schedule: Set daily or weekly cleaning times via app.
Manual control: Use directional arrows on remote for specific area cleaning.
Pause/resume: Press CLEAN button to pause, press again to resume.

WARNING! Do not pick up wet debris or liquids. Avoid high-pile carpets over 0.5 inches.

Maintenance and Care

Regular maintenance ensures optimal performance.

Empty dustbin: After each cleaning cycle or when full indicator lights.
Clean brushes: Remove hair and debris from main brush weekly.
Replace side brushes: Every 6-12 months or when worn.
Clean sensors: Wipe with dry cloth monthly.
Replace HEPA filter: Every 3-6 months depending on use.
Clean charging contacts: On dock and vacuum monthly.

CAUTION! Unplug charging dock before cleaning. Use only Shark-approved replacement parts.

Safety Information

Closed Captions: Not applicable. Parental Controls: Use boundary strips to restrict access to certain areas.

Regulatory Compliance

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2023 SharkNinja Operating LLC; all trademarks property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting Guide

Symptom	Possible Cause	Corrective Action
Vacuum not charging	Dock connection	Ensure vacuum is properly seated on dock; clean charging contacts.
Not connecting to Wi-Fi	Network issues	Ensure 2.4GHz network; restart router; reinstall app.
Poor navigation	Dirty sensors	Clean all sensors with dry cloth; clear floor of obstacles.
Reduced suction	Full dustbin/clog	Empty dustbin; check for blockages in air path.
Not returning to dock	Obstructions	Clear path to dock; ensure dock is powered.
Side brushes not spinning	Tangled debris	Remove hair and strings from brush ends.
Error beeps	Various issues	Consult app for specific error code; restart vacuum.

Reset: Hold CLEAN and DOCK buttons for 10 seconds to factory reset.

Service: 1-800-798-7398; www.sharkclean.com/support