Shark RV765 Vacuum Cleaner Manual

The Shark RV765 is a versatile upright vacuum cleaner featuring powerful suction, a HEPA filtration system, multiple cleaning modes, LED headlights, and a self-cleaning brushroll. Designed for carpets and hard floors, it includes various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Motorized brushroll, Dust cup with HEPA filter, Handle with controls, LED headlights, Hose with wand, Crevice tool, Upholstery tool, Dusting brush.

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

1. Attach handle: Insert handle into body until it clicks into place.
2. Install wand: Insert wand into hose connector until secure.
3. Attach hose: Connect hose to vacuum body and wand.
4. Install attachments: Store crevice tool, upholstery tool, and dusting brush on dock.
5. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Use

Plug in vacuum; follow these steps for initial operation.

1. Select cleaning mode: Use floor selector switch for carpet or hard floor.
2. Turn on power: Press power switch to start suction.
3. Engage brushroll: Press brushroll button for carpet cleaning.
4. Adjust height: Use height adjustment lever for different carpet piles.
5. Empty dust cup: Press release button to remove and empty dust cup after use.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

• Model: Shark RV765.
• Power: 120V AC, 60Hz, 12 Amps.
• Suction Power: Multi-cyclonic technology.
• Filtration: HEPA filter captures 99.9% of particles.
• Brushroll: Self-cleaning, anti-hair wrap.
• Attachments: Crevice tool, upholstery tool, dusting brush.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.5 liters.
• Weight: 15 lbs.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body. Handle: Power switch, Brushroll on/off, Floor selector. Body: Height adjustment, Dust cup release, Wand release.

Cleaning Modes: Carpet mode (brushroll on), Hard Floor mode (brushroll off), Bare Floor setting. Height Adjustment: Adjust for low, medium, high-pile carpets. Suction Control: Automatic adjustment based on floor type.

Using Attachments

For above-floor cleaning: stairs, upholstery, ceilings, tight spaces.

1. Remove wand: Press wand release button and pull wand out.
2. Attach tool: Insert crevice tool, upholstery tool, or dusting brush into wand.
3. Clean: Use hose and wand to reach difficult areas.
4. Store: Return attachments to dock after use.

Tip: Ensure vacuum is turned off when changing attachments.

Cleaning Modes

Optimize cleaning for different surfaces.

1. Carpet Mode: Engages brushroll for deep cleaning; use height adjustment.
2. Hard Floor Mode: Brushroll off to prevent scattering debris.
3. Bare Floor Setting: Suction optimized for hard surfaces.
4. Above-Floor Cleaning: Use attachments with hose and wand.
5. LED Headlights: Automatically illuminate in dark areas.

WARNING! Do not use on wet surfaces. Avoid vacuuming large objects that may clog hose.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: After each use; press release button to remove.
2. Clean filter: Remove HEPA filter monthly; rinse with water, air dry completely.
3. Check brushroll: Remove hair and debris from brushroll regularly.
4. Inspect hose and wand: Clear any clogs.
5. Store properly: Keep in dry area; wrap cord around hooks.

CAUTION! Unplug vacuum before maintenance. Ensure filter is completely dry before reinserting.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 10 minutes, then restart.

Service: 1-800-798-7398; www.sharkclean.com