Shark RV763 Vacuum Cleaner Manual

The Shark RV763 is a versatile upright vacuum cleaner featuring powerful suction, a multi-surface brushroll, advanced swivel steering, a large-capacity dust cup, HEPA filtration, and multiple cleaning modes for carpets and hard floors. It includes attachments for above-floor cleaning, a lift-away pod for portable cleaning, and LED headlights. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Upright body with swivel steering, Lift-Away pod, Multi-surface brushroll, Dust cup with HEPA filter, LED headlights, Hose with wand, Crevice tool, Upholstery tool, Dusting brush.

Feature	Description
Multi-surface brushroll	Automatically adjusts between carpets and hard floors
Lift-Away pod	Detachable for portable cleaning above floors
Swivel steering	Provides maneuverability around furniture and obstacles
HEPA filtration	Captures 99.9% of dust and allergens
LED headlights	Illuminates dark areas under furniture
Large dust cup	Easy-empty, bagless design
Cleaning modes	CARPET, HARD FLOOR, and MAX settings
Attachments	Crevice tool, upholstery tool, dusting brush included
Power cord	25-foot length for extended reach
Wand release	Quick-release button for attachment access

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach handle: Insert handle into upright body until it clicks into place.
Install hose: Connect hose to rear port; ensure secure fit.
Attach wand: Insert wand into hose cuff; lock with release button.
Attach tools: Store crevice tool, upholstery tool, and dusting brush on dock.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; select appropriate cleaning mode.

Select floor type: Use mode switch for CARPET or HARD FLOOR.
Adjust height: For carpets, ensure brushroll touches surface.
Begin cleaning: Push vacuum forward; use swivel steering for turns.
Empty dust cup: Press release button; empty when full.
Use attachments: Detach Lift-Away pod for above-floor cleaning.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll.

Specifications

Model: Shark RV763.
Power: 120V, 60Hz, 12 Amps.
Suction Power: Advanced cyclonic suction technology.
Filtration: HEPA filter, washable foam filter.
Dust Cup Capacity: 1.5 dry quarts.
Cord Length: 25 feet.
Cleaning Modes: CARPET, HARD FLOOR, MAX.
Brushroll: Anti-allergen seal, self-cleaning.
Attachments: Crevice tool, upholstery tool, dusting brush.
Weight: 15.2 lbs.

Controls and Settings

Power switch: On/Off button on handle. Mode selector: CARPET, HARD FLOOR, MAX. Brushroll switch: On/Off for hard floors. Handle release: Button to detach Lift-Away pod. Dust cup release: Button to remove dust cup.

LED Indicators: Power on (green), filter check (red).

Settings: CARPET mode (default for rugs), HARD FLOOR mode (brushroll off), MAX mode (maximum suction for deep cleaning).

Using Attachments

For above-floor cleaning: Detach Lift-Away pod.

Press handle release button; lift pod away from base.
Attach desired tool: Insert crevice tool, upholstery tool, or dusting brush into wand end.
Clean: Use for furniture, stairs, ceilings, and tight spaces.
Return pod: Reattach to base until it clicks.

Tip: Store attachments on dock when not in use.

Cleaning Modes

Select mode based on surface.

CARPET mode: Brushroll on for deep carpet cleaning.
HARD FLOOR mode: Brushroll off to prevent scattering debris.
MAX mode: Increases suction for embedded dirt; use sparingly to conserve battery.
Brushroll on/off: Toggle switch to enable/disable brushroll.

WARNING! Do not use HARD FLOOR mode on carpets; may reduce cleaning efficiency.

Maintenance

Regular maintenance ensures optimal performance.

Empty dust cup: After each use; press release button.
Clean filters: Wash HEPA and foam filters monthly; air dry 24 hours.
Clear brushroll: Remove hair and debris weekly; use cleaning tool.
Check hose/wand: Remove clogs with long object.
Inspect power cord: Do not use if damaged.

CAUTION! Unplug vacuum before maintenance. Do not operate without filters.

Care & Storage

Store in cool, dry place. Wrap cord around hooks. Clean exterior with dry cloth.

CAUTION! Do not store with wet filters. Keep away from heat sources.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clog	Empty dust cup; check hose and wand for blockages.
Brushroll not spinning	Hair/debris wrap	Unplug; clear brushroll; ensure mode is set to CARPET.
Vacuum won't turn on	Power source/switch	Check outlet; ensure power switch is on; inspect cord.
Overheating	Clogged filter/full dust cup	Clean filters; empty dust cup; allow to cool 60 minutes.
LED lights not working	Connection issue	Check pod connection; ensure vacuum is powered.

Reset: Unplug for 10 minutes; restart.

Service: 1-800-798-7398; sharkclean.com