The Shark RV761 is a versatile robot vacuum cleaner designed for efficient floor cleaning with smart navigation, multiple cleaning modes, Wi-Fi connectivity, and a self-emptying base. It features advanced suction power, HEPA filtration, brushroll technology for various floor types, and app control for scheduling and monitoring. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.
Key components: Robot vacuum, Self-Emptying Base, Charging Dock, Remote Control, Side Brushes, Main Brushroll, Dust Bin, HEPA Filter, and Sensors.
| Feature | Description |
|---|---|
| Self-Emptying Base | Automatically empties dust bin into disposable bag |
| Smart Navigation | Uses sensors to map and navigate rooms efficiently |
| Wi-Fi Connectivity | Connects to SharkClean app for control and scheduling |
| HEPA Filtration | Captures 99.97% of dust and allergens |
| Multi-Surface Brushroll | Adjusts for carpets and hard floors |
| Voice Control | Works with Alexa and Google Assistant |
| Auto-Recharge | Returns to base when battery is low |
| Spot Cleaning | Intensive clean for concentrated areas |
| Edge Cleaning | Side brushes reach along walls and corners |
| Quiet Mode | Reduced noise for quiet operation |
Unpack and inspect all components. Place base on level surface.
WARNING! Keep base away from stairs and high-traffic areas. Ensure charging contacts are clean.
Fully charge before first use; prepare cleaning area.
CAUTION! Do not use on wet surfaces. Keep away from water sources.
Access controls via robot buttons, remote, or app. Robot Buttons: POWER, CLEAN, SPOT, DOCK.
Remote: POWER, CLEAN, SPOT, EDGE, QUIET, MAX, DOCK, CLOCK/SCHEDULE.
App Settings: Cleaning schedules, room selection, suction power, notifications, voice control setup. Robot Settings: Reset Wi-Fi, factory reset, filter replacement reminder. Base Settings: Empty bin frequency, bag full indicator.
Select mode based on floor type and cleaning needs.
Tip: Use Spot Mode for high-traffic areas like entryways.
Regular maintenance ensures optimal performance.
WARNING! Unplug base before maintenance. Do not wash HEPA filter.
SharkClean app enables smart features and control.
Note: Requires 2.4GHz Wi-Fi network. Ensure robot is within Wi-Fi range.
Read all safety instructions before use.
CAUTION! Risk of injury if mishandled. Store in dry area.
FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Robot not charging | Dirty contacts/base issue | Clean charging contacts; ensure base is plugged in; reposition robot on dock. |
| Poor navigation | Dirty sensors/obstacles | Clean sensors; clear floor of obstacles; ensure adequate lighting. |
| Weak suction | Full dust bin/clog | Empty dust bin; check for clogs in brushroll and air path; replace filter. |
| App not connecting | Wi-Fi issues | Ensure 2.4GHz network; restart robot and router; reinstall app. |
| Base not emptying | Full bag/clog | Replace disposable bag; check for clogs in base hose; ensure robot is seated properly. |
| Robot stuck | Obstacles/low battery | Move robot to open area; check for tangled brushes; recharge. |
Reset: Hold CLEAN and DOCK buttons for 10 seconds to reset robot.
Service: 1-800-798-7398; www.sharkclean.com