Shark RV750 N Vacuum Cleaner Manual

The Shark RV750 N is a high-performance robotic vacuum cleaner designed for automated floor cleaning. It features smart navigation, multiple cleaning modes, Wi-Fi connectivity, a self-emptying base, HEPA filtration, and compatibility with the SharkClean app. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unboxing and Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi and App 7. Cleaning Modes and Scheduling 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Robotic vacuum unit, Self-Empty Base, Charging dock, Remote control, Side brushes, HEPA filter, Dust bin.

Feature	Description
Smart Navigation	Uses sensors to map and navigate rooms efficiently
Self-Empty Base	Automatically empties dust bin into base for up to 30 days
HEPA Filtration	Captures 99.9% of dust and allergens
Wi-Fi Connectivity	Connects to SharkClean app for remote control
Multiple Cleaning Modes	Auto, Spot, Edge, and Max modes
Voice Control	Works with Amazon Alexa and Google Assistant
Recharge & Resume	Returns to dock to recharge, then resumes cleaning
Boundary Strips	Virtual barriers to restrict cleaning areas
High-Efficiency Brushroll	Designed for carpets and hard floors
Drop Sensors	Prevents falls from stairs and ledges

Unboxing and Setup

Unpack and inspect all contents. Place on a flat, stable surface.

Remove all packaging materials from the robot and base.
Place the Self-Empty Base against a wall, with at least 3 feet of clearance on each side and 5 feet in front.
Insert the filter into the base and attach the dust bag.
Charge the robot: Place it on the charging dock until the battery is full (approx. 4 hours).
Install side brushes by pressing them onto the bottom of the robot.

WARNING! Keep the vacuum away from water and wet surfaces. Ensure the area is free of loose cables and small objects.

First-Time Use

Power on the vacuum; follow initial setup prompts.

Fully charge the robot before first use.
Clear the cleaning area of obstacles, cords, and small objects.
Press the CLEAN button on the robot or remote to start cleaning.
For app setup: Download SharkClean app, create account, and follow in-app instructions to connect.
Set up boundary strips if needed to block off specific areas.

CAUTION! Do not use on wet surfaces or to pick up liquids. Keep hair and loose fabrics away from brushroll.

Specifications

Model: Shark RV750 N.
Type: Robotic vacuum with self-empty base.
Navigation: Smart sensor navigation with room mapping.
Dust Capacity: Self-Empty Base holds up to 30 days of dust.
Filtration: HEPA filter captures 99.9% of particles.
Battery: Lithium-ion, up to 90 minutes runtime.
Charging Time: Approximately 4 hours.
Connectivity: Wi-Fi 2.4 GHz, SharkClean app.
Compatibility: Amazon Alexa, Google Assistant.
Cleaning Modes: Auto, Spot, Edge, Max.
Power Source: 120V AC, 60Hz.

Controls and Settings

Access controls via physical buttons, remote, or app. Robot Buttons: CLEAN, DOCK, SPOT, MAX.

Remote: POWER, CLEAN, DOCK, SPOT, EDGE, MAX, CLOCK (schedule).

App Controls: Start/stop cleaning, select modes, set schedules, view cleaning history, manage boundaries. Settings: Suction power (Eco, Normal, Max), scheduling (daily, weekly), do-not-disturb mode, filter replacement reminders, software updates.

Connecting to Wi-Fi and App

Connect to Wi-Fi for app control and software updates.

Download SharkClean app from App Store or Google Play.
Create an account or log in.
Press and hold DOCK and SPOT buttons on robot for 3 seconds until Wi-Fi light flashes.
Follow in-app instructions to connect to your 2.4 GHz Wi-Fi network.
Name your robot and assign it to a room.

Tip: Ensure your phone is connected to the same Wi-Fi network during setup.

Cleaning Modes and Scheduling

Supports multiple cleaning modes for different needs.

Auto Mode: Default mode; cleans entire floor using smart navigation.
Spot Mode: Concentrates cleaning on a 3-foot diameter area.
Edge Mode: Cleans along walls and edges.
Max Mode: Increases suction power for deep cleaning.
Scheduling: Set daily or weekly cleaning via app or remote (CLOCK button).
Recharge & Resume: Robot returns to dock if battery low, then resumes cleaning.
Voice Control: Use commands like "Alexa, tell Shark to start cleaning."

WARNING! Do not pick up hard or sharp objects that may damage the vacuum.

Maintenance and Care

Regular maintenance ensures optimal performance.

Empty dust bin after each cleaning cycle.
Clean filter monthly: Tap gently to remove dust; rinse if washable (let dry 24 hours).
Remove and clean brushroll weekly: Clear hair and debris.
Wipe sensors and charging contacts with dry cloth.
Check side brushes for wear; replace if bent or damaged.
Replace dust bag in base when full indicator lights up.

CAUTION! Unplug base before maintenance. Do not use water on electrical parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398. This product incorporates patented self-empty technology.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not starting	Low battery/not docked	Place on charger; ensure power outlet works.
Poor navigation	Dirty sensors/obstacles	Clean sensors; clear floor of obstacles.
App not connecting	Wi-Fi issues	Restart robot and router; ensure 2.4 GHz network.
Weak suction	Full dust bin/clog	Empty dust bin; check for blockages in brushroll.
Not returning to dock	Blocked path/low battery	Clear path to dock; ensure dock is powered.
Error beeps	Brushroll stuck/wheels blocked	Turn off, remove debris from brushroll and wheels.

Reset: Hold DOCK and MAX buttons for 10 seconds to reset robot.

Service: 1-800-798-7398; www.sharkclean.com