Shark RV2800YEUK Vacuum Cleaner Manual

The Shark RV2800YEUK is a powerful and versatile robot vacuum cleaner designed for automated floor cleaning. It features smart navigation, multiple cleaning modes, a self-emptying base, Wi-Fi connectivity for app control, compatibility with voice assistants, and strong suction for carpets and hard floors. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Connecting to App & Wi-Fi 7. Cleaning Modes & Scheduling 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Robot Vacuum, Self-Emptying Base, Charging Dock, Side Brushes, High-Efficiency Filter, Remote Control, Power Adapter.

Feature	Description
Self-Emptying Base	Automatically empties robot's dustbin into base for up to 30 days
Smart Navigation	Laser-based mapping and room recognition
Wi-Fi & App Control	Connect via SharkClean app for scheduling and control
Voice Control	Works with Amazon Alexa and Google Assistant
Multiple Cleaning Modes	Auto, Spot, Edge, and Max modes
Strong Suction	Powerful suction for carpets and hard floors
Boundary Strips	Magnetic strips to block off areas
Auto-Recharge	Returns to base when battery is low
HEPA Filtration	Traps 99.9% of dust and allergens
Cliff Sensors	Prevents falls from stairs and ledges

Installation & Setup

Unpack and inspect all contents. Place base on a level surface.

Charge the robot: Place robot on charging dock; ensure power is connected to base.
Install side brushes: Attach brushes to bottom of robot until they click into place.
Prepare cleaning area: Remove small objects, cords, and loose rugs from floor.
Position base: Place in an open area with at least 3 feet clearance on each side and 5 feet in front.
Power on: Ensure base is plugged into a working outlet; robot will indicate charging status.

WARNING! Keep base away from heat sources and water. Do not place in direct sunlight.

First-Time Use

Fully charge robot before first use (approx. 4 hours).

Initial mapping run: Press CLEAN on robot or app to start first cleaning; robot will map your home.
Set up Wi-Fi: Download SharkClean app, follow in-app instructions to connect robot to your network.
Name your rooms: Use app to label rooms after mapping is complete.
Set cleaning preferences: Adjust suction power and scheduling in app.
Test boundary strips: Place magnetic strips to block off areas as needed.

CAUTION! Ensure all cliff sensors are clean and unobstructed for safe operation.

Specifications

Model: Shark RV2800YEUK Robot Vacuum.
Suction Power: High-performance motor with adjustable settings.
Battery: Lithium-ion, up to 90 minutes runtime (varies by mode).
Dustbin Capacity: Robot: 0.5L; Base: 1.5L.
Filtration: HEPA filter, washable.
Connectivity: 2.4GHz Wi-Fi, SharkClean app, Alexa, Google Assistant.
Cleaning Modes: Auto, Spot, Edge, Max.
Navigation: LaserSmart mapping with room recognition.
Power Source: 100-240V AC, 50/60Hz.
Operating Temp: 32°F to 104°F (0°C to 40°C).

Controls and Settings

Access controls via physical buttons, remote, or SharkClean app.

Robot Buttons: CLEAN (start/pause), DOCK (return to base), SPOT (spot clean), POWER (on/off).

App Controls: Start/stop cleaning, select rooms, set schedules, adjust suction, view cleaning history, set no-go zones.

Cleaning Settings: Suction power (Eco, Normal, Max), cleaning mode (Auto, Spot, Edge), scheduling (daily, weekly).

Maintenance Alerts: App notifies when to empty bin, clean filter, or check brushes.

Connecting to App & Wi-Fi

Requires 2.4GHz Wi-Fi network and SharkClean app.

Download SharkClean app from Apple App Store or Google Play Store.
Create account or log in.
Press and hold DOCK and SPOT buttons on robot until Wi-Fi light flashes.
Follow in-app prompts to connect robot to your Wi-Fi network.
Name your robot and set up rooms after initial mapping.

Tip: Ensure robot is close to router during setup. Disable VPN if connection fails.

Cleaning Modes & Scheduling

Supports multiple cleaning modes for different needs.

Auto Mode: Robot cleans entire mapped area using optimized path.
Spot Mode: Concentrates cleaning on a 3x3 foot area.
Edge Mode: Focuses on cleaning along walls and edges.
Max Mode: Increases suction power for deep cleaning.
Room Select: Choose specific rooms to clean via app.
Scheduling: Set daily or weekly cleaning schedules in app.
Manual Control: Use directional arrows in app to steer robot manually.

WARNING! Do not pick up or move robot during cleaning. Allow it to complete cycle and return to base.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dustbin: After each cleaning cycle or when full.
Clean filter: Remove and tap gently; rinse with water every 3 months (air dry completely).
Check brushes: Remove hair and debris from main brush and side brushes weekly.
Clean sensors: Wipe cliff sensors and charging contacts with dry cloth.
Inspect wheels: Ensure wheels rotate freely and are clean.
Replace parts: Side brushes every 6-12 months; filter annually (depending on use).

CAUTION! Unplug base before maintenance. Do not use robot on wet surfaces.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC rules. Operation is subject to conditions that it does not cause harmful interference. Copyright © 2023 SharkNinja Operating LLC. All rights reserved. Shark and SharkClean are trademarks of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not starting	Low battery/not docked	Ensure robot is on charger; check power outlet; wait for full charge.
Poor suction	Full dustbin/clogged filter	Empty dustbin; clean filter; check for blockages in intake.
Robot getting stuck	Obstacles/cords on floor	Clear floor of obstacles; use boundary strips; check for tangled brushes.
Wi-Fi connection lost	Network issues/out of range	Restart router; ensure robot is within range; reconnect in app.
Base not emptying bin	Full base/bin not aligned	Empty base dustbag; ensure robot is properly seated on base.
Error beeps/lights	Brush jammed/wheel issue	Check and clean brushes and wheels; restart robot.

Reset: Hold DOCK and SPOT buttons for 10 seconds to reset Wi-Fi settings.

Service: 1-800-798-7398; www.sharkclean.com/support