Shark RV2620WAEUWH Vacuum Cleaner Manual

The Shark RV2620WAEUWH is a powerful and efficient robot vacuum cleaner designed for automated floor cleaning. It features smart navigation, multiple cleaning modes, Wi-Fi connectivity for app control, a self-emptying base, HEPA filtration, and compatibility with voice assistants. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi & App 7. Cleaning Modes & Scheduling 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Robot vacuum, Self-Empty Base, Charging Dock, Remote Control, Side Brushes, HEPA Filter, Dust Bin.

Feature	Description
Smart Navigation	Uses sensors to map and navigate rooms efficiently
Self-Empty Base	Automatically empties dust bin into base for up to 30 days
Wi-Fi Connectivity	Connect to SharkClean app for control and scheduling
HEPA Filtration	Traps 99.9% of dust and allergens
Voice Control	Works with Alexa and Google Assistant
Multiple Cleaning Modes	Auto, Spot, Edge, and Max modes
Boundary Strips	Virtual barriers to restrict cleaning areas
Recharge & Resume	Automatically returns to dock to recharge and resumes cleaning
High-Efficiency Filter	Washable and reusable
Side Brushes	Dual brushes for edge and corner cleaning

Installation & Setup

Unpack and inspect all components. Place base on a level surface against a wall.

Charge the robot: Place robot on charging dock; ensure power indicator lights up.
Install side brushes: Attach brushes to bottom of robot until they click into place.
Prepare cleaning area: Remove small objects, cords, and loose rugs.
Power on base: Plug base into AC outlet; ensure it's in an open area.

WARNING! Keep robot away from stairs and wet areas. Ensure charging contacts are clean.

First-Time Use

Fully charge robot before first use (approx. 4 hours).

Turn on robot: Press POWER button on robot or remote.
Start cleaning: Press CLEAN on robot or remote to begin Auto mode.
Set up Wi-Fi: Download SharkClean app and follow in-app instructions.
Create schedule: Use app to set daily or weekly cleaning schedules.

CAUTION! Do not use on wet surfaces. Keep hair and strings away from brushes.

Specifications

Model: Shark RV2620WAEUWH Robot Vacuum.
Power Source: Rechargeable lithium-ion battery.
Run Time: Up to 90 minutes per charge.
Dust Capacity: Self-Empty Base holds up to 30 days of dust.
Filtration: HEPA filter, washable.
Connectivity: Wi-Fi 2.4 GHz, SharkClean app.
Voice Control: Compatible with Alexa and Google Assistant.
Cleaning Modes: Auto, Spot, Edge, Max.
Noise Level: Low to moderate (varies by mode).
Weight: Approx. 3.5 kg (robot only).

Controls and Settings

Robot buttons: POWER, CLEAN, DOCK. Remote: POWER, CLEAN, SPOT, EDGE, MAX, DOCK.

App controls: Start/stop, mode selection, scheduling, cleaning history, filter status.

Cleaning modes: Auto (default), Spot (intensive small area), Edge (focus on walls), Max (maximum suction). Settings: Schedule (daily/time), Do Not Disturb (quiet hours), carpet boost (auto increase suction). Maintenance alerts: Filter cleaning, bin full, brush cleaning.

Connecting to Wi-Fi & App

Requires 2.4 GHz Wi-Fi network and SharkClean app (iOS/Android).

Download SharkClean app from App Store or Google Play.
Create account or log in.
Press and hold DOCK and SPOT buttons on robot until Wi-Fi light flashes.
Follow app instructions to connect robot to your Wi-Fi network.
Name your robot and set preferences.

Tip: Ensure robot is near router during setup. Restart router if connection fails.

Cleaning Modes & Scheduling

Supports automated and manual cleaning.

Auto mode: Robot cleans entire area using smart navigation.
Spot mode: Cleans a concentrated area (approx. 1m diameter).
Edge mode: Focuses on edges and corners.
Max mode: Maximum suction for deep cleaning.
Scheduling: Set daily or weekly cleaning via app.
Boundary strips: Place magnetic strips to block off areas.
Recharge & resume: Enabled by default; robot returns to dock if battery low.

WARNING! Do not pick up robot during cleaning. Keep pets and children away during operation.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust bin: After each cleaning or when alert appears.
Clean filter: Rinse HEPA filter every 1-2 months; air dry completely.
Clear brushes: Remove hair and debris from main brush and side brushes weekly.
Clean sensors: Wipe sensors and charging contacts with dry cloth.
Check wheels: Remove tangled hair or threads.

CAUTION! Unplug base before maintenance. Do not use robot or base if wet.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398. This product is covered by a limited warranty; see warranty card for details.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not charging	Dirty contacts, misplaced dock	Clean charging contacts; ensure robot is properly seated on dock.
Robot not connecting to Wi-Fi	Wrong network, signal weak	Use 2.4 GHz network; move robot closer to router; restart robot and app.
Poor cleaning performance	Full bin, dirty filter, tangled brushes	Empty bin; clean filter; clear brushes and wheels.
Robot stuck or not moving	Obstacles, low battery	Clear path; move to open area; recharge.
Self-Empty Base not working	Full bag, clogged hose	Replace bag; check hose for blockages.

Reset: Hold DOCK and CLEAN buttons for 10 seconds to reset robot.

Service: 1-800-798-7398; www.sharkclean.com/support