Shark RV2600WD Series Vacuum Cleaner Manual

The Shark RV2600WD Series is a robotic vacuum cleaner featuring Wi-Fi connectivity, self-emptying base, multi-surface cleaning with brush rolls, smart sensor navigation, app control via SharkClean app, voice control compatibility (Alexa/Google Assistant), scheduled cleaning, spot cleaning mode, and allergen capture seal. Powered by lithium-ion battery with auto-recharge and resume. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Configuration 4. Specifications 5. Controls and Indicators 6. Connecting to Wi-Fi and App 7. Cleaning Modes and Scheduling 8. Maintenance and Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robotic vacuum unit, Self-Empty Base, Charging dock, Side brushes, Filter set, Remote Control (if included).

Feature	Description
Self-Empty Base	Automatically empties robot's dustbin into base bag
Wi-Fi Connectivity	Connects to home network for app control
Multi-Surface Brush Roll	Cleans carpets and hard floors
Smart Sensor Navigation	Detects obstacles and avoids falls
SharkClean App	Control cleaning, schedules, and settings
Voice Control	Works with Amazon Alexa and Google Assistant
Auto-Recharge & Resume	Returns to dock to recharge, then resumes cleaning
Spot Cleaning Mode	Focuses on a concentrated area
Allergen Capture Seal	Traps dust and allergens inside vacuum
Boundary Strips	Virtual barriers to restrict cleaning areas

Unpacking and Setup

Unpack and inspect all contents. Place base on level surface.

Install Self-Empty Base: Place against wall with 3 feet clearance on each side and 5 feet in front.
Charge robot: Place robot on charging contacts of base; ensure power cord plugged in.
Install side brushes: Snap brushes onto bottom of robot.
Install filter: Insert filter into dustbin compartment.
Power on: Switch on robot and base unit.

WARNING! Keep hair, loose clothing, fingers, and feet away from brush rolls and openings during operation.

First-Time Configuration

Power on robot; follow initial setup prompts.

Initial charge: Allow robot to charge fully (approx. 4 hours) before first use.
Clear area: Remove small objects, cords, and clutter from floor.
Download app: Install SharkClean app from App Store or Google Play.
Connect to Wi-Fi: Use app to connect robot to your 2.4GHz Wi-Fi network.
Test run: Start a cleaning cycle to ensure proper navigation.

CAUTION! Do not place base in direct sunlight or wet areas.

Specifications

Model Series: RV2600WD.
Power Source: Lithium-ion battery, 14.4V.
Charging Time: Approximately 4 hours.
Run Time: Up to 90 minutes per charge.
Dustbin Capacity: 0.2 gallons (robot), 1.0 gallon (base bag).
Noise Level: ≤ 65 dB.
Connectivity: 2.4GHz Wi-Fi, IEEE 802.11 b/g/n.
Compatibility: iOS 11.0+ / Android 6.0+.
Weight: Robot: 7.5 lbs; Base: 10.2 lbs.
Operating Temp: 32°F to 104°F (0°C to 40°C).

Controls and Indicators

Robot Top: POWER/CLEAN button, SPOT CLEAN button, DOCK button, Wi-Fi indicator light, Battery indicator. Base: Power indicator, Bag full indicator, Error light.

App Controls: Start/Pause, Schedule, Cleaning modes (Eco, Normal, Max), History, Settings.

Cleaning Modes: Eco (quiet, longer runtime), Normal (balanced), Max (deep clean). Scheduling: Set daily/weekly cleaning times via app. Notifications: Receive alerts for completed jobs, errors, or full bag.

Connecting to Wi-Fi and App

Requires 2.4GHz Wi-Fi network (not 5GHz).

Enable robot's Wi-Fi: Press and hold DOCK and SPOT buttons for 3 seconds until Wi-Fi light blinks.
Open SharkClean app, tap "+" to add device.
Select robot model, follow in-app instructions.
Enter Wi-Fi password when prompted.
Wait for connection confirmation.

Tip: Ensure robot is within range of Wi-Fi router during setup.

Cleaning Modes and Scheduling

Supports automatic, manual, and scheduled cleaning.

Start cleaning: Press CLEAN button on robot or use app.
Select mode: Choose Eco, Normal, or Max in app.
Spot clean: Press SPOT button for 2-minute focused clean.
Send to dock: Press DOCK button or use app command.
Schedule: In app, set day/time for automatic start.
Boundary setting: Use virtual boundary strips or no-go zones in app (if supported).
Voice control: Say "Alexa, ask Shark to start cleaning" or similar.

WARNING! Do not pick up or move robot while cleaning; allow it to complete cycle.

Maintenance and Care

Regular maintenance ensures optimal performance.

Empty dustbin: Remove and empty robot dustbin after each cycle.
Check base bag: Replace when bag full indicator lights.
Clean brushes: Remove and clear hair/debris from brush rolls weekly.
Clean sensors: Wipe cliff and navigation sensors with dry cloth.
Clean filter: Tap filter to remove dust; rinse every 3 months (air dry completely).
Check wheels: Remove debris from wheels and side brushes.

CAUTION! Unplug base before maintenance. Do not use wet cloth on electrical parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ICES-003: Complies with Canadian standards. Copyright © 2023 SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not starting	Low battery/not docked	Place on charger; ensure contacts clean; wait for full charge.
Wi-Fi not connecting	Network issues	Ensure 2.4GHz network; restart router; redo setup in app.
Poor navigation	Dirty sensors/clutter	Clean sensors; clear floor of obstacles and cords.
Brush not spinning	Debris blockage	Turn off robot; remove and clean brush roll.
Base not emptying robot	Full bag/clog	Replace bag; check hose for clogs; ensure robot seated properly.
Error beeps/lights	Various faults	Consult app error code; reset robot (hold CLEAN 10 seconds).

Reset: Hold CLEAN button for 10 seconds to factory reset.

Service: 1-800-798-7398; www.sharkclean.com/support