Shark RV2000WDBRN Vacuum Cleaner Manual

The Shark RV2000WDBRN is a high-performance robotic vacuum cleaner featuring smart navigation, Wi-Fi connectivity, self-emptying base, multi-surface cleaning, and voice control compatibility. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi & App 7. Cleaning Modes & Scheduling 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Robotic vacuum unit, Self-Emptying Base, Charging Dock, Remote Control, Side Brushes, HEPA Filter, Dust Bin.

Feature	Description
Smart Navigation	Laser-based mapping for efficient room coverage
Self-Emptying Base	Automatically empties dust bin into base for up to 30 days
Wi-Fi Connectivity	Connects to SharkClean app for remote control
Voice Control	Works with Amazon Alexa and Google Assistant
Multi-Surface Cleaning	Adjusts suction for carpets and hard floors
Boundary Strips	Virtual barriers to restrict cleaning areas
Auto-Recharge	Returns to base when battery is low
HEPA Filtration	Captures 99.97% of dust and allergens
Spot Cleaning	Intensive cleaning for concentrated areas
Edge Cleaning	Special mode for cleaning along walls and edges

Installation & Setup

Unpack and inspect all components. Place base on level surface.

Charge the vacuum: Place robot on charging dock until fully charged (approx. 4 hours).
Install side brushes: Attach left and right brushes to bottom of unit.
Set up self-emptying base: Place base against wall with 3 feet clearance on each side.
Connect base power: Plug into standard 120V AC outlet.
Install app: Download SharkClean app from App Store or Google Play.

WARNING! Keep base away from stairs and high-traffic areas. Ensure charging contacts are clean.

First-Time Use

Power on vacuum; follow app setup instructions.

Create home map: Allow robot to complete initial full-home cleaning to create map.
Name rooms: Use app to label rooms on the map for targeted cleaning.
Set no-go zones: Define areas where robot should not clean.
Test voice control: Link with Alexa or Google Assistant using app.
Schedule cleaning: Set daily or weekly cleaning schedules in app.

CAUTION! Remove small objects, cords, and loose rugs before first cleaning.

Specifications

Model: Shark RV2000WDBRN
Type: Robotic Vacuum with Self-Emptying Base
Suction Power: Advanced multi-surface suction
Battery: Lithium-ion, up to 90 minutes runtime
Dust Capacity: Base holds 30 days of debris
Filtration: HEPA filter with anti-allergen seal
Connectivity: 2.4GHz Wi-Fi, Bluetooth
Voice Control: Amazon Alexa, Google Assistant
Dimensions: Robot: 13.8" diameter, Base: 12.5" x 16.5"
Weight: Robot: 7.5 lbs, Base: 10.2 lbs
Power Source: 120V AC, 60Hz

Controls and Settings

Physical Controls: CLEAN button, SPOT CLEAN button, DOCK button, POWER switch. App Controls: Start/Stop, Schedule, Room Select, Suction Settings, Map Management.

Remote: CLEAN, DOCK, SPOT, EDGE, MAX SUCTION, SCHEDULE.

Settings: Suction Power (Eco, Normal, Max), Cleaning Mode (Auto, Edge, Spot), Scheduling (Daily/Weekly), No-Go Zones, Room Preferences, Voice Control Setup, Filter Reset Indicator.

Connecting to Wi-Fi & App

Wi-Fi: 2.4GHz network required. App: SharkClean available for iOS and Android.

Turn on robot and ensure it's on charging dock.
Open SharkClean app and create account.
Follow in-app instructions to connect to Wi-Fi.
Name your robot for easy identification.
Enable voice control through app settings.

Tip: Keep robot within Wi-Fi range during initial setup.

Cleaning Modes & Scheduling

Supports multiple cleaning modes for different needs.

Auto Mode: Default cleaning for entire mapped area.
Room Select: Clean specific rooms via app selection.
Spot Cleaning: Concentrated cleaning in 3-foot diameter.
Edge Cleaning: Focus on walls and edges.
Max Suction: Maximum power for deep cleaning.
Eco Mode: Quiet operation with extended battery.
Scheduling: Set daily or weekly cleaning times in app.
Manual Control: Use app to drive robot remotely.

WARNING! Clear floor of obstacles before scheduled cleaning.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust bin: Robot bin after each use; base bin monthly.
Clean brushes: Remove hair and debris from main brush weekly.
Replace filters: HEPA filter every 6-12 months.
Clean sensors: Wipe sensors and charging contacts monthly.
Check wheels: Remove debris from wheels and casters.
Store properly: Keep in dry area away from direct sunlight.

CAUTION! Unplug base before maintenance. Do not use water on electronic components.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit www.sharkclean.com or contact 1-800-798-7398. This device complies with part 15 of the FCC Rules.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot won't start	Low battery/not docked	Place on charger; ensure power is on; check outlet.
Poor navigation	Dirty sensors/obstacles	Clean sensors; remove obstacles; clear floor clutter.
Not connecting to Wi-Fi	Network issues	Ensure 2.4GHz network; restart router; reconnect in app.
Weak suction	Full dust bin/clog	Empty dust bin; clean filters; check for blockages.
Not returning to base	Blocked path/low battery	Clear path to base; ensure base is powered; recharge.
Error messages	Various issues	Consult app error guide; restart robot; reset if needed.

Reset: Hold CLEAN and DOCK buttons for 10 seconds to factory reset.

Service: 1-800-798-7398; www.sharkclean.com/support