Shark Rotator ZU80 Vacuum Cleaner Manual

The Shark Rotator ZU80 is a versatile upright vacuum cleaner featuring Powered Lift-Away technology, DuoClean floor brush, Anti-Allergen Complete Seal, LED headlights, and a large-capacity dust cup. It is designed for deep cleaning on carpets and hard floors, with multiple attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, DuoClean floor brush, Lift-Away pod, Hose and wand, Dust cup with filter, Various cleaning attachments.

Feature	Description
Powered Lift-Away	Detachable pod for portable above-floor cleaning
DuoClean Floor Brush	Dual-brush roll system for carpets and hard floors
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
LED Headlights	Illuminates dark areas under furniture
Large Dust Cup	Easy-empty, no-touch dust cup
Multi-Surface Settings	Adjustable suction for different floor types
Attachments Included	Pet Power Brush, Crevice Tool, Upholstery Tool, Dusting Brush
Power Switch	Turns vacuum on/off
Brush Roll Control	Engages/disengages brush roll for hard floors
Cord Rewind	Automatic cord rewind for easy storage

Assembly & Setup

Unpack all parts and inspect for damage. Assemble before first use.

Attach wand: Insert wand into vacuum body until it clicks.
Connect hose: Attach hose to wand and vacuum pod.
Install floor nozzle: Slide DuoClean nozzle onto wand until secure.
Attach accessories: Store attachments on clip or holder.
Plug into electrical outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from moving parts.

First-Time Use

Before cleaning, perform initial setup and check functions.

Check filters: Ensure both foam and felt filters are installed in dust cup.
Select floor setting: Use dial on floor nozzle for carpets or hard floors.
Power on: Press power switch; LED lights should illuminate.
Test suction: Place hand over nozzle to confirm strong suction.
Test Lift-Away: Press release button to detach pod for above-floor cleaning.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

Model: Shark Rotator ZU80.
Technology: Powered Lift-Away, DuoClean.
Filtration: Anti-Allergen Complete Seal with HEPA filter.
Dust Cup Capacity: 1.5 quarts.
Cord Length: 25 feet.
Attachments: Pet Power Brush, Crevice Tool, Upholstery Tool, Dusting Brush.
Power Source: 120V AC, 60Hz.
Weight: 15.2 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on vacuum body and floor nozzle.

On Vacuum Body: Power switch, Lift-Away release button, Suction control slider, Cord rewind pedal.

On Floor Nozzle: Brush roll on/off switch, Floor type selector (carpet/hard floor), Height adjustment (if applicable).

Settings: Use suction control for delicate rugs; turn brush roll off for hard floors; select carpet setting for deep cleaning.

Using Attachments

For above-floor cleaning, detach Lift-Away pod and connect desired tool.

Detach pod: Press release button and lift pod away from floor nozzle.
Connect tool: Attach Pet Power Brush, Crevice Tool, etc., to hose end.
Clean: Use tool on upholstery, stairs, ceilings, or tight spaces.
Return to upright: Reattach pod to floor nozzle until it clicks.

Tip: Use Pet Power Brush for pet hair on furniture; Crevice Tool for edges and corners.

Cleaning Modes

Three main cleaning modes: Upright, Lift-Away, and Handheld.

Upright mode: For floor cleaning with floor nozzle attached.
Lift-Away mode: Detach pod to clean stairs, under furniture, etc.
Handheld mode: Remove wand and use hose with small attachments.
Adjust settings: Select carpet or hard floor; engage/disengage brush roll.
Empty dust cup: Press release button to remove and empty when full.

WARNING! Do not use vacuum to pick up sharp objects, which may damage dust cup or filters.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Empty after each use or when full.
Clean filters: Rinse foam and felt filters monthly; air dry completely.
Check brush roll: Remove hair and debris from brush roll regularly.
Inspect hose: Clear any clogs in hose or wand.
Store properly: Wrap cord and store in dry place.

CAUTION! Always unplug vacuum before maintenance. Do not use vacuum without filters installed.

Regulatory Information

This vacuum cleaner complies with FCC Part 15 for Class B digital devices. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clogged filter	Empty dust cup; clean filters; check for hose clogs.
Brush roll not spinning	Obstruction/switch off	Clear debris from brush roll; ensure brush roll switch is on.
Vacuum won't turn on	Power cord/outlet issue	Check power cord connection; try different outlet.
Lift-Away pod not detaching	Release button stuck	Press release button firmly; check for obstructions.
Overheating	Clogged filter/full dust cup	Clean filters; empty dust cup; let vacuum cool for 30 minutes.

Reset: Unplug vacuum for 30 minutes to reset thermal protector.

Service: 1-800-798-7398; sharkclean.com