Shark ROTATOR UV770Q Vacuum Cleaner Manual

The Shark ROTATOR UV770Q is a powerful upright vacuum cleaner featuring Lift-Away technology, Anti-Allergen Complete Seal, DuoClean PowerFins brushroll, UV Sanitizer light, and advanced swivel steering. This manual covers safety instructions, assembly, operation, maintenance, troubleshooting, and specifications to ensure optimal performance and longevity of your vacuum.

Features at a Glance

Key components: Main vacuum body with DuoClean brushroll, Dust Cup, Handle with controls, Hose with wand, Various attachments, UV Sanitizer light module.

Assembly & Setup

Unpack all components and inspect for damage. Assemble before first use.

1. Attach handle: Insert handle into main body until it clicks into place.
2. Connect hose: Attach hose to front of vacuum; ensure secure connection.
3. Install wand: Insert metal wand into hose end.
4. Attach floor nozzle: Connect floor nozzle to wand or directly to hose for Lift-Away mode.
5. Plug into standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brushroll during installation.

Operating Instructions

Power on vacuum; select appropriate settings for your floor type.

1. Select mode: Use upright mode for floors; detach pod for Lift-Away cleaning.
2. Adjust suction: Use suction control dial on handle for different surfaces.
3. Engage brushroll: Ensure brushroll is ON for carpets; OFF for hard floors or delicate rugs.
4. Activate UV light: Press UV button when cleaning germ-prone areas (bathrooms, kitchens).
5. Empty dust cup: Press release button when full; empty into trash.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

• Model: Shark ROTATOR UV770Q.
• Technology: Lift-Away, DuoClean, Anti-Allergen Complete Seal.
• UV Sanitizer: UV-C light technology for surface sanitization.
• Suction Power: Advanced motor with adjustable suction control.
• Dust Cup Capacity: 1.5 quarts (dry).
• Cord Length: 25 feet.
• Attachments: Crevice tool, dusting brush, pet power brush, upholstery tool.
• Power Source: 120V AC, 60Hz.
• Weight: 15.2 lbs.

Controls and Functions

Main controls located on handle and body. Handle: Power/UV button, Suction control dial, Brushroll switch. Body: Dust cup release, Hose release, Mode selector (Upright/Lift-Away).

Indicator Lights: UV light indicator (blue), Brushroll status (green), Full dust cup alert (red).

Suction Control: Adjust from MIN to MAX for different surfaces. Brushroll Switch: ON for carpets, OFF for hard floors. UV Button: Press once to activate UV light (works only when brushroll is engaged on floor). Mode Selector: Switch between upright and Lift-Away portable cleaning.

Maintenance & Cleaning

Regular maintenance ensures peak performance and extends vacuum life.

1. Empty dust cup after each use or when full indicator lights.
2. Clean filters: Remove and rinse foam and felt filters monthly; air dry completely for 24 hours.
3. Clear brushroll: Remove hair and debris from brushroll weekly.
4. Check hose and attachments for clogs monthly.
5. Inspect UV light lens; clean with dry cloth if dirty.

Tip: Always unplug vacuum before performing any maintenance.

Using Attachments

Attachments enhance cleaning versatility for above-floor areas.

1. Detach hose: Press hose release button on vacuum body.
2. Select attachment: Connect desired tool to wand or hose end.
3. Clean: Use crevice tool for tight spaces; dusting brush for shelves; pet power brush for pet hair.
4. Store: Return attachments to storage caddy after use.

WARNING! Do not use attachments to vacuum liquids or sharp objects.

UV Sanitizer Feature

The UV-C light helps reduce bacteria, viruses, and allergens on surfaces.

1. Activate: Press UV button when vacuum is on and brushroll is engaged.
2. Clean slowly: Move vacuum slowly over surface to allow UV light exposure.
3. Deactivate: Press UV button again or turn off vacuum.

Note: UV light is not a substitute for chemical disinfectants. It is designed to reduce microbial load on surfaces. Avoid direct eye exposure to UV light.

Care & Storage

Unplug and cool before storing. Store in a dry place.

1. Wrap cord: Use cord hooks on back of vacuum.
2. Store attachments: Place in provided caddy or bag.
3. Clean exterior: Wipe with a dry cloth; do not use liquids.
4. Check for damage: Inspect cord, hose, and brushroll before next use.

CAUTION! Do not store vacuum with wet filters. Ensure all parts are dry to prevent mold.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. UV feature complies with FDA regulations for UV-C emitting devices. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 seconds; plug back in to reset motor protection circuit.

Service: 1-800-798-7398; www.sharkclean.com