Shark Rotator Professional Lift-Away UV561Q Vacuum Cleaner Manual

The Shark Rotator Professional Lift-Away UV561Q is a versatile upright vacuum cleaner featuring a Lift-Away pod for portable cleaning above floors, Anti-Allergen Complete Seal technology with a HEPA filter, Powered Lift-Away mode for deep cleaning carpets, a motorized brushroll for carpets and hard floors, swivel steering for maneuverability, LED headlights, and a large-capacity dust cup. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with handle, Lift-Away pod, motorized floor nozzle, extension wand, crevice tool, dusting brush, upholstery tool, and HEPA filter.

Assembly & Setup

Unpack all parts and inspect contents. Assemble on a flat, stable surface.

1. Attach the handle: Insert the handle into the main body until it clicks into place.
2. Connect the hose: Attach the hose to the port on the front of the vacuum body.
3. Install the floor nozzle: Slide the nozzle onto the bottom of the vacuum until it locks.
4. Attach the extension wand: Connect the wand to the hose end or store on the pod.
5. Install tools: Store crevice tool, dusting brush, and upholstery tool on the pod clips.
6. Insert the HEPA filter: Ensure the filter is properly seated in the filter compartment.

WARNING! Ensure all parts are securely connected before use to prevent damage or injury.

First-Time Use

Plug the vacuum into a standard 120V outlet. Ensure the dust cup is empty and filter is installed.

1. Select cleaning mode: For floors, use upright mode. For above-floor cleaning, press the Lift-Away release button to detach the pod.
2. Adjust settings: On the handle, select "CARPET" or "HARD FLOOR" mode. Use the brushroll on/off switch for delicate rugs.
3. Begin cleaning: Press the power button on the handle. The LED lights will illuminate.
4. Use accessories: Attach desired tool to the end of the hose or extension wand for detailed cleaning.

CAUTION! Keep hair, loose clothing, and fingers away from the brushroll and openings.

Specifications

• Model: Shark Rotator Professional Lift-Away UV561Q.
• Type: Upright vacuum with Lift-Away pod.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Cleaning Modes: Upright, Powered Lift-Away, Handheld.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.5 quarts.
• Brushroll: Motorized, auto-adjusting for carpets/hard floors.
• Accessories: Extension wand, crevice tool, dusting brush, upholstery tool.
• Power Source: 120V AC, 60Hz.
• Weight: Approximately 15 lbs.

Controls and Parts

Main Controls: Power button, Carpet/Hard Floor selector, Brushroll on/off switch, Lift-Away release button.

Key Parts: Main body, handle with controls, Lift-Away pod, motorized floor nozzle, hose, extension wand, dust cup release latch, filter compartment, accessory storage clips, cord wrap hooks.

Operation: Power on/off with handle button. Select floor type for optimal brushroll speed. Detach pod for above-floor cleaning. Use brushroll switch to turn off brush for delicate surfaces. Empty dust cup when full indicator appears.

Cleaning Modes

Upright Mode: For cleaning carpets and hard floors. Powered Lift-Away Mode: Detach pod while brushroll remains powered for deep cleaning carpets and area rugs. Handheld Mode: Use pod alone with hose and tools for stairs, furniture, and tight spaces.

1. For whole-house floors: Use in upright mode with appropriate floor setting.
2. For stairs: Detach pod, attach desired tool to hose, and clean step-by-step.
3. For above-floor surfaces: Use handheld mode with dusting brush or upholstery tool.
4. For edges and corners: Use crevice tool attached to hose or extension wand.

Tip: Regularly check and clear the brushroll of hair and debris for optimal performance.

Maintenance & Emptying

Empty dust cup after each use or when full.

1. Turn off and unplug vacuum.
2. Press dust cup release button and lift cup away from body.
3. Hold over trash can and press bottom latch to open door; debris will fall out.
4. Close door and reattach dust cup until it clicks.
5. Check and clear brushroll: Turn nozzle over, remove cover, and cut away wrapped debris.
6. Inspect hose and attachments for clogs; clear if necessary.

WARNING! Always unplug vacuum before performing maintenance. Do not use water on electrical parts.

Filter Care

Maintain filtration efficiency by regularly cleaning filters.

1. HEPA filter: Remove every month (or as needed) by opening filter compartment. Tap gently to remove dust. Rinse with cold water only; air dry completely for 24 hours before reinstalling.
2. Pre-motor filter: Check and clean monthly. Remove, tap out dust, and rinse if washable. Ensure completely dry before reinserting.

CAUTION! Never operate vacuum without filters installed. Never use soap or detergents on filters.

Care & Storage

Unplug before cleaning. Wipe exterior with a dry or slightly damp cloth. Store in a cool, dry place.

CAUTION! Do not immerse in water or use abrasive cleaners. Wrap cord around cord hooks for neat storage. Ensure vacuum is completely dry before storing.

Regulatory Information

This vacuum cleaner complies with relevant safety standards. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This product is covered by a limited warranty; see warranty card for details.

Troubleshooting

Reset: Unplug vacuum for 60 minutes if overheating occurs; check and clear all blockages before restarting.

Service: 1-800-798-7398; sharkclean.com