Shark Rotator Professional Lift-Away NV500C Vacuum Cleaner Manual

The Shark Rotator Professional Lift-Away NV500C is a versatile upright vacuum cleaner featuring Lift-Away technology for portable cleaning, a motorized brushroll for carpets, HEPA filtration, multiple attachments for above-floor cleaning, and a large-capacity dust cup. It is designed for deep cleaning on carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Lift-Away pod, motorized brushroll, HEPA filter, dust cup, hose, wand, and multiple cleaning attachments.

Assembly & Setup

Unpack all parts and inspect for damage. Assemble according to instructions.

1. Attach handle: Insert handle into top of vacuum body until it clicks.
2. Connect hose: Attach hose to port on front of vacuum.
3. Install wand: Insert wand into hose handle.
4. Attach floor nozzle: Connect floor nozzle to wand or directly to hose in Lift-Away mode.
5. Plug into AC power.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from brushroll.

First-Time Use

Before first use, ensure filters are installed and dust cup is empty.

1. Check filters: Ensure HEPA and pre-motor filters are in place.
2. Select mode: Choose upright or Lift-Away mode based on cleaning needs.
3. Adjust settings: Set brushroll on for carpets, off for hard floors.
4. Begin cleaning: Turn on power and move vacuum slowly over surfaces.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

• Model: Shark Rotator Professional Lift-Away NV500C.
• Technology: Lift-Away, Anti-Allergen Complete Seal.
• Filtration: HEPA filter, foam and felt pre-motor filters.
• Dust Cup Capacity: 1.5 quarts.
• Cord Length: 25 feet.
• Attachments: Pet Power Brush, crevice tool, dusting brush, upholstery tool.
• Power Source: 120V AC, 60Hz.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body. Handle: Power switch, brushroll on/off, suction control. Body: Lift-Away release button, dust cup release.

Settings: Brushroll on/off for carpets/hard floors; suction control for delicate rugs; Lift-Away mode for above-floor cleaning.

Indicator lights: Filter check light alerts when filters need cleaning.

Using Attachments

Attach tools to wand or hose for specialized cleaning.

1. Detach pod: Press Lift-Away button to separate pod from floor nozzle.
2. Select attachment: Choose tool for task (e.g., crevice tool for tight spaces).
3. Connect: Insert attachment into end of wand or hose.
4. Clean: Turn on vacuum and guide tool over surfaces.

Tip: Use Pet Power Brush for pet hair on furniture and stairs.

Cleaning Modes

Two main modes: Upright and Lift-Away.

1. Upright mode: For floor cleaning; engage brushroll for carpets.
2. Lift-Away mode: Detach pod for portable cleaning; use with attachments.
3. Above-floor cleaning: Use hose and attachments for furniture, ceilings, etc.
4. Under furniture: Use hose and crevice tool for hard-to-reach areas.

WARNING! Do not use vacuum to pick up sharp objects that could damage components.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button; empty when full.
2. Clean filters: Rinse HEPA and pre-motor filters monthly; air dry 24 hours.
3. Clear brushroll: Remove debris from brushroll regularly.
4. Check hose/wand: Remove clogs if suction decreases.

CAUTION! Unplug vacuum before maintenance. Do not use damaged filters.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com