Shark Rotator Powered Lift-Away ZU621 Vacuum Cleaner Manual

The Shark Rotator Powered Lift-Away ZU621 is a versatile upright vacuum cleaner featuring Powered Lift-Away technology for above-floor cleaning, a motorized brushroll for carpets, Anti-Allergen Complete Seal Technology with a HEPA filter, LED headlights, a large-capacity dust cup, and multiple attachments including a crevice tool, pet multi-tool, and dusting brush. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Powered Lift-Away pod, motorized floor nozzle with brushroll, wand, hose, dust cup with HEPA filter, and accessory set.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Attach wand: Insert wand into floor nozzle until it clicks.
2. Connect hose: Attach hose to back of vacuum pod; ensure secure connection.
3. Install accessories: Store tools on accessory holder.
4. Plug into standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep hair, loose clothing, and fingers away from brushroll.

First-Time Use

Before cleaning, perform initial setup.

1. Check filters: Ensure HEPA filter and foam filter are properly installed.
2. Adjust height: Set floor selector to appropriate setting (carpet or hard floor).
3. Test attachments: Connect crevice tool or pet multi-tool to hose end.
4. Power on: Press power switch; LED lights will illuminate.

CAUTION! Do not use on wet surfaces. Keep vacuum away from water.

Specifications

• Model: Shark Rotator Powered Lift-Away ZU621.
• Technology: Powered Lift-Away, Anti-Allergen Complete Seal.
• Filtration: HEPA filter, foam filter.
• Dust Cup Capacity: 1.5 dry quarts.
• Cord Length: 25 feet.
• Attachments: Crevice tool, pet multi-tool, dusting brush.
• Power Source: 120V AC, 60Hz.
• Weight: 15.2 lbs.

Controls and Settings

Main controls located on vacuum body and handle.

On Vacuum Body: Power switch, brushroll on/off, suction control, wand release button.

On Handle: Power trigger (for Lift-Away mode), hose release.

Settings: Floor selector (carpet/hard floor), suction power (high/medium/low), brushroll on/off for hard floors. Use accessory buttons to quickly switch tools.

Using Attachments

Attach tools directly to hose or wand for above-floor cleaning.

1. Detach pod: Press Lift-Away release button to separate pod from floor nozzle.
2. Connect tool: Insert crevice tool, pet multi-tool, or dusting brush into hose end.
3. Clean: Use power trigger on handle to activate suction.
4. Return to upright: Reattach pod to floor nozzle until it clicks.

Tip: Use pet multi-tool for upholstery and stairs; crevice tool for tight spaces.

Cleaning Modes

Two main modes: Upright and Powered Lift-Away.

1. Upright mode: For floor cleaning with motorized brushroll.
2. Lift-Away mode: Detach pod to clean above floors, stairs, furniture.
3. Hard floor setting: Turn brushroll off to prevent scattering debris.
4. Carpet setting: Brushroll on for deep cleaning.

WARNING! Do not use brushroll on hard floors without turning it off first.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty when full. Clean filters: Rinse HEPA and foam filters monthly; air dry 24 hours. Clear brushroll: Remove debris from brushroll regularly. Check for clogs: Inspect hose, wand, and nozzle if suction decreases.

CAUTION! Unplug vacuum before maintenance. Do not use damaged filters.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com