Shark Rotator Powered Lift-Away ZU620 Vacuum Cleaner Manual

The Shark Rotator Powered Lift-Away ZU620 is a versatile upright vacuum cleaner featuring Powered Lift-Away technology for portable deep cleaning, a motorized brushroll for carpets, Anti-Allergen Complete Seal Technology with a HEPA filter, LED headlights, and a large-capacity dust cup. It includes multiple attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Powered Lift-Away pod, Motorized brushroll, LED headlights, Large-capacity dust cup with quick-release, HEPA filter, Crevice tool, Upholstery tool, Pet Multi-Tool, Duster Crevice Tool, and Storage caddy.

FeatureDescription
Powered Lift-AwayDetachable pod for portable deep cleaning above floors
Motorized BrushrollSpinning brush for carpet cleaning; auto-shuts off on hard floors
Anti-Allergen Complete SealSealed system with HEPA filter traps 99.9% of dust and allergens
LED HeadlightsIlluminates dark areas under furniture
Large Dust CupEasy-empty, bagless dust cup with quick-release
AttachmentsMultiple tools for crevices, upholstery, dusting, and pet hair
Power SwitchTurns vacuum cleaner on/off
Brushroll On/OffDisengages brushroll for hard floors
Handle ControlsButtons for power and brushroll on handle
Carpet Height AdjustmentManual dial for different carpet pile heights

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

  1. Attach handle: Insert handle into top of vacuum body until it clicks into place.
  2. Install wand: Insert wand into hose until it clicks.
  3. Attach hose: Connect hose to back of vacuum pod; ensure secure connection.
  4. Attach floor nozzle: Connect floor nozzle to wand or directly to hose for lift-away mode.
  5. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brushroll area.

First-Time Use

Before first use, ensure all filters are installed correctly.

  1. Check filters: Ensure HEPA filter and foam filter are in place in dust cup.
  2. Select mode: For floor cleaning, use upright mode. For above-floor, detach pod.
  3. Adjust height: Turn dial on floor nozzle to match carpet height (low/medium/high).
  4. Power on: Press power button on handle; green light indicates power.
  5. Test brushroll: Press brushroll button to engage/disengage for carpets/hard floors.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair, loose clothing, and fingers away from openings.

Specifications

Controls and Settings

Handle Controls: POWER button (On/Off), BRUSHROLL button (On/Off for carpets/hard floors). Floor Nozzle: Carpet height adjustment dial (Low/Medium/High), LED headlights (auto-on when powered).

Modes: Upright mode (for floors), Lift-Away mode (detach pod for portable cleaning).

Filtration: HEPA filter (replace every 12 months), foam filter (rinse monthly). Dust Cup: Release button to empty; ensure it clicks back into place.

Using Attachments

For above-floor cleaning: Detach pod from floor nozzle.

  1. Select attachment: Choose Crevice, Upholstery, Pet Multi-Tool, or Duster Crevice Tool.
  2. Connect: Insert attachment into end of hose or wand until it clicks.
  3. Clean: Use power button on handle to start suction.
  4. Switch attachments: Press release button to remove; insert new tool.

Tip: Use Pet Multi-Tool for pet hair on furniture; use Crevice tool for tight spaces.

Cleaning Modes

Two main modes: Upright and Powered Lift-Away.

  1. Upright Mode: For carpets and hard floors. Engage brushroll for carpets; disengage for hard floors.
  2. Powered Lift-Away Mode: Press release button on back to detach pod. Carry pod to clean stairs, furniture, ceilings.
  3. Brushroll Control: Press BRUSHROLL button to turn on/off. Green light indicates brushroll is on.
  4. Height Adjustment: Turn dial on floor nozzle to match carpet pile (Low for bare floors/rugs, High for thick carpets).
  5. LED Lights: Automatically illuminate under furniture when vacuum is on.

WARNING! Do not use lift-away mode to vacuum stairs while standing on stairs. Ensure pod is secure.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty dust cup: Press release button; empty when dust reaches MAX line.
  2. Clean filters: Rinse foam filter under cold water monthly; air dry 24 hours. Replace HEPA filter every 12 months.
  3. Check brushroll: Regularly remove hair and debris wrapped around brushroll. Unplug vacuum first.
  4. Inspect hose and attachments: Clear any blockages.
  5. Store properly: Use storage caddy to keep attachments organized.

CAUTION! Always unplug vacuum before maintenance. Do not use damaged filters.

Regulatory Information

This vacuum cleaner complies with FCC Part 15 Subpart B for Class B digital devices. Copyright © SharkNinja Operating LLC. Shark and Rotator are registered trademarks. For support, visit sharkclean.com or contact 1-800-798-7398. Keep these instructions for future reference.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower cord/outletCheck if plugged in; test outlet; check power switch.
Loss of suctionFull dust cup/blockageEmpty dust cup; check hose, nozzle, and filters for clogs.
Brushroll not spinningEngagement setting/obstructionEnsure brushroll is on; clear debris from brushroll area.
Vacuum overheatsBlockage/filtersUnplug; let cool; check for clogs; clean filters.
LED lights not workingConnectionEnsure vacuum is on; lights may need replacement if faulty.
Strange noiseForeign object in brushroll/hoseUnplug; inspect brushroll and hose; remove obstruction.

Reset: Unplug for 60 minutes if unit overheats; plug back in.

Service: 1-800-798-7398; sharkclean.com

Shark Rotator Powered Lift-Away ZU620 Vacuum Cleaner Manual © - All Rights Reserved 2025