Shark ROTATOR POWERED LIFT-AWAY UV755 Series Vacuum Cleaner Manual

The Shark ROTATOR POWERED LIFT-AWAY UV755 Series is a versatile upright vacuum cleaner featuring Powered Lift-Away technology, Anti-Allergen Complete Seal technology with a HEPA filter, DuoClean PowerFins brushroll, LED headlights, and a variety of attachments for whole-home cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Lift-Away Mode 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Powered Lift-Away pod, DuoClean PowerFins floor nozzle, Hose and wand assembly, Crevice tool, Dusting brush, Upholstery tool, Pet Multi-Tool.

Feature	Description
Powered Lift-Away Technology	Detach the pod for portable, powerful cleaning above floors
Anti-Allergen Complete Seal	HEPA filter and sealed system trap 99.9% of dust and allergens
DuoClean PowerFins	Dual brushrolls for deep carpet cleaning and bare floor pickup
LED Headlights	Illuminate hidden dust and debris under furniture
Multi-Surface Settings	Adjustable suction settings for carpets and hard floors
Large Capacity Dust Cup	Easy-to-empty, bagless dust cup with one-touch release
POWER/SURFACE Switch	Turns vacuum on/off and selects floor type
LIFT-AWAY Release Button	Releases the pod from the floor nozzle for portable cleaning
Hose Release Lever	Releases hose and wand for above-floor cleaning
Brushroll Control	On/Off switch for the motorized floor brush

Assembly & Setup

Unpack all components and inspect for damage.

Attach the handle: Insert the handle into the main body until it clicks into place.
Connect the hose: Attach the hose end to the port on the front of the vacuum body.
Attach the wand: Insert the wand into the hose handle until it clicks.
Attach floor nozzle: Align the nozzle with the base and push until it locks.
Install filters: Place the HEPA filter and pre-motor filter as indicated in the manual.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug the vacuum into a standard 120V outlet.

Select surface setting: Use the POWER/SURFACE switch to select CARPET or HARD FLOOR.
Turn on: Slide the POWER/SURFACE switch to ON.
Begin cleaning: Push vacuum forward on floor; the brushroll will engage automatically on carpet setting.
Adjust height (if applicable): Some models have an automatic adjustment.
Use attachments: Detach wand and hose to use tools for furniture, stairs, and crevices.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

Model Series: UV755 (specific model numbers may vary).
Technology: Powered Lift-Away, DuoClean PowerFins, Anti-Allergen Complete Seal.
Filtration: HEPA filter, foam and felt pre-motor filters.
Cord Length: 25 feet.
Dust Cup Capacity: 1.3 dry quarts.
Attachments Included: Crevice tool, dusting brush, upholstery tool, Pet Multi-Tool.
Power Source: 120V AC, 60Hz.
Warranty: Limited 5-year warranty (see manual for details).

Controls and Settings

Main controls located on the handle and body.

Handle Controls: POWER/SURFACE switch (Off, Hard Floor, Carpet), Brushroll On/Off switch.

Body Controls: LIFT-AWAY Release Button, Hose Release Lever, Dust Cup Release Button.

Settings: CARPET setting provides stronger suction and brushroll action. HARD FLOOR setting reduces suction and may disengage brushroll for gentle cleaning. Brushroll On/Off allows you to turn the motorized brush on or off for delicate rugs or to prevent scatter.

Using Attachments

For above-floor cleaning: stairs, furniture, ceilings, and tight spaces.

Enter Lift-Away mode: Press the LIFT-AWAY release button and lift the pod away from the floor nozzle.
Detach wand and hose: Press the hose release lever and pull out the wand.
Select tool: Attach desired tool (crevice, dusting brush, etc.) to the end of the wand or hose.
Clean: Turn on vacuum and guide tool over surfaces.
Return to upright: Reconnect hose and wand, then snap the pod back onto the floor nozzle.

Tip: The Pet Multi-Tool combines a motorized brush and crevice tool for pet hair removal.

Lift-Away Mode

Powered Lift-Away allows you to detach the main vacuum pod for portable cleaning.

Ensure vacuum is on and in CARPET or HARD FLOOR mode.
Press the LIFT-AWAY release button on the front of the vacuum body.
Lift the pod away from the floor nozzle. The hose remains connected.
Carry the pod to clean stairs, furniture, or other above-floor areas. The motor and suction remain active.
To reattach, align the pod with the floor nozzle and push down until it clicks into place.

WARNING! Keep the hose untangled during use. Do not pull the vacuum by the hose.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty Dust Cup: Press release button, remove cup, and empty into trash. Do not overfill.
Clean Filters: Rinse HEPA filter and pre-motor filters with cold water every month. Air dry for 24 hours completely before reinstalling.
Clear Brushroll: Turn off and unplug vacuum. Remove floor nozzle and cut away wrapped hair or fibers from brushroll.
Check for Clogs: If suction is low, check hose, wand, and air pathways for blockages.
Store Properly: Wrap cord around cord hooks. Store attachments on holder if provided.

CAUTION! Never use vacuum without all filters installed and completely dry. Do not immerse any electrical parts in water.

Regulatory Information

This appliance complies with FCC Part 15. Operation is subject to the condition that this device does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark, ROTATOR, POWERED LIFT-AWAY, DuoClean, and Anti-Allergen Complete Seal are trademarks of SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Ensure plug is securely in outlet; check household circuit breaker.
Loss of suction	Full dust cup/clogged filter	Empty dust cup; check and clean filters; clear clogs in hose, wand, or nozzle.
Brushroll not spinning	Brushroll switch/obstruction	Ensure brushroll is set to ON; unplug and clear debris wrapped around brushroll.
Vacuum is difficult to push	Height setting/brushroll	Select correct surface setting; ensure brushroll is clean and free to turn.
Lift-Away pod won't detach	Release button not fully engaged	Press the LIFT-AWAY button firmly and lift straight up.
Unusual noise or smell	Obstruction in motor area	Turn off and unplug immediately. Check for blockages. Contact customer service if problem persists.

Reset: Unplug vacuum for 60 seconds to reset thermal protector if motor overheats.

Service: 1-800-798-7398; sharkclean.com