Shark Rotator Powered Lift-Away Speed Vacuum Cleaner Manual

The Shark Rotator Powered Lift-Away Speed is a versatile upright vacuum cleaner featuring a Powered Lift-Away mode for above-floor cleaning, DuoClean technology for carpets and hard floors, Anti-Allergen Complete Seal with HEPA filter, LED headlights, and a large-capacity dust cup. It includes multiple attachments for various cleaning tasks. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Powered Lift-Away pod, DuoClean floor nozzle, Anti-Allergen Complete Seal system, HEPA filter, LED headlights, Dust cup with empty button, Hose, Wand, and multiple attachments.

Feature	Description
Powered Lift-Away	Detachable pod for portable above-floor cleaning
DuoClean Technology	Dual brush rolls for carpets and hard floors
Anti-Allergen Complete Seal	Sealed system with HEPA filter traps 99.9% of dust and allergens
LED Headlights	Illuminates dark areas under furniture
Large Dust Cup	Easy-empty, no-touch dust cup with large capacity
Multi-Attachment Set	Includes crevice tool, pet multi-tool, dusting brush, and upholstery tool
Power Switch	Turns vacuum on/off
Brush Roll Switch	Activates/deactivates brush roll for hard floors
Suction Control	Adjusts suction power for different surfaces
Handle Controls	Convenient buttons for power and brush roll on handle

Assembly & Setup

Unpack and inspect all contents. Assemble following steps.

Attach wand: Insert wand into vacuum body until it clicks.
Connect hose: Attach hose to wand and vacuum body ports.
Attach floor nozzle: Connect DuoClean nozzle to wand or Lift-Away pod.
Install filters: Place HEPA filter and pre-motor filter in their compartments.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Use

Plug in vacuum; follow operational steps.

Select mode: Choose upright or Lift-Away mode based on cleaning task.
Adjust settings: Set suction control and brush roll as needed.
Begin cleaning: Push vacuum forward on floor; use attachments for above-floor areas.
Empty dust cup: Press empty button over trash can when full.

CAUTION! Keep hair, loose clothing, and fingers away from brush roll and openings.

Specifications

Model: Shark Rotator Powered Lift-Away Speed.
Technology: DuoClean, Powered Lift-Away, Anti-Allergen Complete Seal.
Filtration: HEPA filter, pre-motor filter.
Attachments: Crevice tool, pet multi-tool, dusting brush, upholstery tool.
Cord Length: 25 feet.
Dust Cup Capacity: 1.3 dry quarts.
Power Source: 120V AC, 60Hz.
Warranty: 5-year limited warranty.

Controls and Settings

Access controls via handle and body. Handle: POWER button, BRUSH ROLL ON/OFF switch. Body: SUCTION CONTROL slider, LIFT-AWAY release button.

Settings: Upright mode for floors; Lift-Away mode for stairs and above-floor; Suction control for high/low power; Brush roll on/off for hard floors.

Maintenance: Filter access doors, dust cup release button, brush roll removal for cleaning.

Using Attachments

Attach tools to hose or wand end for detailed cleaning.

Detach hose or wand from vacuum.
Select attachment (crevice, pet tool, etc.).
Connect to hose or wand end.
Use in Lift-Away mode for best maneuverability.

Tip: Use pet multi-tool for pet hair on furniture; crevice tool for tight spaces.

Cleaning Modes

Two main modes: Upright and Powered Lift-Away.

Upright mode: For floor cleaning; push vacuum across carpets or hard floors.
Lift-Away mode: Press release button to detach pod; clean stairs, furniture, ceilings.
Suction control: Adjust for delicate rugs or high-pile carpets.
Brush roll on/off: Turn off for hard floors to prevent scattering debris.

WARNING! Do not use vacuum to pick up liquids, sharp objects, or hot ashes.

Maintenance

Regular maintenance ensures optimal performance.

Empty dust cup: When full or after each use.
Clean filters: Rinse HEPA and pre-motor filters every 3 months; air dry completely.
Clear brush roll: Remove tangled hair and debris regularly.
Check for blockages: Inspect hose, wand, and nozzle for clogs.

CAUTION! Unplug vacuum before maintenance. Ensure filters are completely dry before reinserting.

Care & Storage

Unplug before storage. Store in dry area; wrap cord around hooks.

CAUTION! Do not store vacuum with wet filters. Keep away from heat sources.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power source/plug	Check outlet; ensure plug is secure; try different outlet.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for blockages.
Brush roll not spinning	Tangle/switch	Clear hair and debris from brush roll; ensure brush roll switch is ON.
Overheating	Clog/filter	Check for blockages; clean filters; let vacuum cool for 45 minutes.
Unusual noise	Debris in motor	Turn off immediately; check for obstructions in intake paths.

Reset: Unplug for 45 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com