Shark Rotator Powered Lift-Away NV750 Series Vacuum Cleaner Manual

The Shark Rotator Powered Lift-Away NV750 Series is a versatile upright vacuum cleaner featuring Powered Lift-Away technology for above-floor cleaning, Anti-Allergen Complete Seal Technology with HEPA filter, DuoClean PowerFins brushroll for carpets and hard floors, LED headlights, multiple attachments (crevice tool, pet multi-tool, dusting brush), and a large-capacity dust cup. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Powered Lift-Away pod, DuoClean PowerFins brushroll, LED headlights, Anti-Allergen Complete Seal with HEPA filter, large dust cup, hose with wand, and multiple attachments.

Feature	Description
Powered Lift-Away	Detachable pod for portable above-floor cleaning
DuoClean PowerFins	Dual brushroll system for carpets and hard floors
Anti-Allergen Complete Seal	HEPA filter traps 99.9% of dust and allergens
LED Headlights	Illuminates dark areas under furniture
Large Dust Cup	Easy-empty, no-touch dirt disposal
Crevice Tool	For tight spaces and corners
Pet Multi-Tool	Combination upholstery tool and motorized brush
Dusting Brush	For delicate surfaces and dusting
Power Switch	Turns vacuum on/off
Brushroll Control	Enables/disables brushroll for hard floors

Assembly & Setup

Unpack and inspect all components. Assemble before first use.

Attach handle: Insert handle into top of vacuum body until it clicks into place.
Connect hose: Attach hose to port on front of vacuum; ensure secure connection.
Install wand: Insert wand into hose handle until it locks.
Attach floor nozzle: Connect floor nozzle to wand; listen for click.
Install filters: Place HEPA filter and pre-motor filter as indicated in manual.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Use

Plug into standard 120V outlet; turn on power switch.

Select cleaning mode: Use upright mode for floors; detach pod for above-floor cleaning.
Adjust settings: Use brushroll control for hard floors (brushroll off) or carpets (brushroll on).
Empty dust cup: Press release button to remove and empty dust cup when full.
Use attachments: Select appropriate tool for specific cleaning tasks.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

Model Series: NV750 Series.
Technology: Powered Lift-Away, DuoClean PowerFins.
Filtration: Anti-Allergen Complete Seal with HEPA filter.
Attachments: Crevice tool, pet multi-tool, dusting brush.
Dust Cup Capacity: XX liters (varies by model).
Cord Length: XX feet.
Power Source: 120V AC, 60Hz.
Weight: XX lbs (varies by model).

Controls and Settings

Main controls located on handle and body. Handle: Power switch, brushroll on/off button. Body: Dust cup release, hose release, mode selector.

Settings: Upright mode for floors; Lift-Away mode for stairs and above-floor; brushroll on for carpets; brushroll off for hard floors.

LED indicators: Power on, brushroll status, filter check. Maintenance alerts: Filter replacement indicator when needed.

Using Attachments

Attach tools to wand or hose for specialized cleaning.

Detach hose/wand from vacuum for above-floor cleaning.
Select tool: Crevice tool for edges; pet multi-tool for pet hair; dusting brush for surfaces.
Attach tool to end of wand or hose until it clicks.
Clean area; detach tool when done.

Tip: Store attachments on vacuum caddy for easy access.

Cleaning Modes

Two main modes: Upright and Powered Lift-Away.

Upright mode: For floor cleaning; vacuum glides on floor with brushroll engaged.
Powered Lift-Away mode: Detach pod from floor nozzle; carry pod to clean stairs, furniture, ceilings.
Brushroll settings: ON for carpets; OFF for hard floors to prevent scattering debris.
LED headlights: Automatically illuminate in dark areas.

WARNING! Do not use vacuum to pick up liquids, sharp objects, or hot ashes.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty into trash; reattach.
Clean filters: Remove and rinse HEPA filter and pre-motor filter every 3 months; air dry 24 hours.
Clear brushroll: Remove debris from brushroll regularly; cut tangled hair with scissors if needed.
Check hose/wand for clogs; clear obstructions.

CAUTION! Unplug vacuum before maintenance. Ensure filters are completely dry before reinserting.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug connection; try different outlet; ensure power switch is ON.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for clogs; clean filters.
Brushroll not spinning	Debris/tangled hair	Turn off and unplug; clear brushroll of debris; ensure brushroll setting is ON.
Vacuum overheating	Clog/filter	Turn off and unplug; let cool; check for clogs; clean filters.
HEPA filter light on	Dirty filter	Remove and clean HEPA filter; air dry completely before reinserting.

Reset: Unplug for 60 seconds; plug back in.

Service: 1-800-798-7398; sharkclean.com