Shark Rotator Powered Lift-Away NV650 Series Vacuum Cleaner Manual

The Shark Rotator Powered Lift-Away NV650 Series is a versatile upright vacuum cleaner featuring Powered Lift-Away technology for above-floor cleaning, a motorized brushroll for carpets, Anti-Allergen Complete Seal Technology with a HEPA filter, LED headlights, and a large-capacity dust cup. It includes multiple attachments for various cleaning tasks. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Powered Lift-Away pod, motorized floor nozzle with brushroll, wand, hose, dust cup with HEPA filter, and accessory storage.

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

1. Insert wand: Slide wand into upright handle until it clicks.
2. Attach hose: Connect hose to pod and wand ports.
3. Install floor nozzle: Align nozzle with pod and push until it locks.
4. Attach accessories: Store tools on accessory holder.
5. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brushroll.

First-Time Use

Plug in vacuum; ensure all parts are securely connected.

1. Select cleaning mode: Upright for floors, Lift-Away for stairs/upholstery.
2. Adjust brushroll: Use brushroll switch for carpets (ON) or hard floors (OFF).
3. Begin vacuuming: Push vacuum forward on floor; use swivel steering.
4. Empty dust cup: Press release button and empty when full.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

• Model Series: NV650.
• Technology: Powered Lift-Away, Anti-Allergen Complete Seal.
• Filtration: HEPA filter, foam filter, felt filter.
• Attachments: Pet Power Brush, Crevice Tool, Upholstery Tool, Duster Crevice Tool.
• Cord Length: 25 feet.
• Dust Cup Capacity: 1.5 quarts.
• Power Source: 120V AC, 60Hz.
• Weight: 14.5 lbs.

Controls and Settings

Main controls located on handle and pod.

Handle: Power switch, brushroll on/off button, wand release pedal.

Pod: Hose release button, dust cup release, filter access.

Cleaning Modes: Upright (floor cleaning), Lift-Away (detached for above-floor). Brushroll Settings: ON for carpets, OFF for hard floors. Suction Control: Automatic adjustment based on floor type.

Cleaning Modes

Upright Mode: For carpets and hard floors. Lift-Away Mode: Detach pod for stairs, furniture, ceilings.

1. To activate Lift-Away: Press release button on pod, lift away from floor nozzle.
2. Use attachments: Connect tools to hose or wand.
3. Return to upright: Align pod with floor nozzle and click into place.

Tip: Use Pet Power Brush for pet hair on furniture and stairs.

Using Attachments

Attachments store on accessory holder.

1. Select tool: Remove from holder.
2. Connect: Insert into wand or hose end.
3. Use: Turn on vacuum and guide tool over surface.
4. Pet Power Brush: For pet hair on upholstery and carpets.
5. Crevice Tool: For tight spaces, corners.
6. Upholstery Tool: For sofas, curtains, car interiors.
7. Duster Crevice Tool: For blinds, shelves, electronics.

WARNING! Do not use attachments to pick up sharp objects.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: When full or after each use.
2. Clean filters: Rinse HEPA, foam, and felt filters monthly; air dry 24 hours.
3. Clear brushroll: Remove hair and debris regularly.
4. Check for clogs: Inspect hose, wand, and nozzle if suction decreases.

CAUTION! Unplug vacuum before maintenance. Do not use damaged filters.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com