Shark ROTATOR NV95 Series Vacuum Cleaner Manual

The Shark ROTATOR NV95 Series is a versatile upright vacuum cleaner featuring Powered Lift-Away technology, DuoClean floor nozzle, Anti-Allergen Complete Seal with HEPA filter, LED headlights, and a variety of attachments for whole-home cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Upright vacuum with Lift-Away pod, DuoClean floor nozzle, Anti-Allergen Complete Seal system, HEPA filter, LED headlights, and accessory storage.

Feature	Description
Powered Lift-Away	Detachable pod for portable above-floor cleaning
DuoClean Floor Nozzle	Dual-brushroll system for carpets and hard floors
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
HEPA Filter	Captures fine particles; washable and reusable
LED Headlights	Illuminates dark areas under furniture
Accessory Storage	Built-in caddy for storing attachments on board
Power Switch	Turns vacuum on/off
Brushroll Control	Enables/disables brushroll for delicate rugs
Suction Control	Adjusts suction power for different surfaces
Handle Release	Releases pod from upright base

Assembly & Setup

Unpack and inspect contents. Assemble according to instructions.

Attach handle: Insert handle into upright body until it clicks securely.
Install floor nozzle: Align nozzle with base and push until it locks.
Attach hose: Connect hose to pod and ensure it is firmly seated.
Install filters: Place pre-motor and HEPA filters into their compartments.
Store attachments: Place crevice tool, dusting brush, and upholstery tool in caddy.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers clear of moving parts.

First-Time Use

Plug in vacuum; select appropriate settings.

Select surface setting: Use brushroll control for carpets; disable for hard floors.
Adjust suction: Use suction control for high-pile rugs or delicate areas.
Engage Lift-Away: Press release button to detach pod for stairs or furniture.
Use attachments: Select appropriate tool for task (crevice, dusting brush, etc.).

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Model Series: NV95 (specific models may vary).
Technology: Powered Lift-Away, DuoClean.
Filtration: Anti-Allergen Complete Seal with HEPA filter.
Attachments: Crevice tool, dusting brush, upholstery tool, pet multi-tool.
Cord Length: 25 feet.
Dust Cup Capacity: 1.3 dry quarts.
Power Source: 120V AC, 60Hz.
Warranty: Limited 5-year warranty (see manual for details).

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, suction control, brushroll on/off, Lift-Away release.

Settings: Suction control (High/Low), brushroll on/off (for area rugs), floor setting (carpet/hard floor). Maintenance indicators: Filter check light, brushroll jam indicator. Accessory selection: Choose tool based on cleaning task (e.g., crevice tool for tight spaces).

Using Attachments

Attachments stored on board; connect to hose for above-floor cleaning.

Detach pod: Press release button to separate from upright base.
Select tool: Choose from crevice tool, dusting brush, upholstery tool, or pet multi-tool.
Connect: Insert tool into hose end until it clicks.
Clean: Use tool on stairs, furniture, ceilings, or tight spaces.

Tip: Ensure hose is fully extended and free of twists for optimal suction.

Cleaning Modes

Three primary modes: Upright, Lift-Away, and Handheld.

Upright mode: For large carpeted or hard floor areas; use floor nozzle.
Lift-Away mode: Detach pod for stairs, under furniture, or above-floor cleaning.
Handheld mode: Remove pod and use with attachments for spot cleaning.
Brushroll control: Turn off for delicate rugs; turn on for deep carpet cleaning.
Suction adjustment: Use low setting for delicate fabrics; high for embedded dirt.

WARNING! Do not use vacuum to pick up sharp objects, which may damage internal components.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: Press release button; empty when full or after each use.
Clean filters: Rinse HEPA and pre-motor filters monthly; air dry completely before reinstalling.
Clear brushroll: Remove debris from brushroll regularly; cut tangled hair with scissors if needed.
Check hose and nozzles: Remove clogs using long, flexible object.
Inspect belt: Replace if worn or damaged (refer to manual for instructions).

CAUTION! Unplug vacuum before performing any maintenance. Do not operate with wet filters.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All rights reserved. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, nozzle, and filters for blockages.
Brushroll not spinning	Debris/tangled belt	Clear debris from brushroll; check and replace belt if necessary.
Vacuum shuts off	Overheating/clog	Unplug, let cool for 60 minutes; clear any clogs in hose or nozzle.
Unusual noise	Foreign object in brushroll or hose	Inspect brushroll and hose; remove any obstructions.
Filters dirty	Reduced airflow	Clean or replace filters as instructed in manual.

Reset: Unplug vacuum for 60 minutes to reset thermal protector.

Service: 1-800-798-7398; www.sharkclean.com