Shark Rotator NV750ANZ Vacuum Cleaner Manual

The Shark Rotator NV750ANZ is a versatile upright vacuum cleaner featuring Powered Lift-Away technology, DuoClean floor nozzle, Anti-Allergen Complete Seal, LED headlights, and a large-capacity dust cup. It includes multiple attachments for above-floor cleaning and is designed for deep cleaning on carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, DuoClean floor nozzle, Lift-Away canister, Dust cup with filter, Hose with wand, and various attachments.

Feature	Description
Powered Lift-Away	Detachable canister for portable above-floor cleaning
DuoClean Floor Nozzle	Dual-brushroll system for carpets and hard floors
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
LED Headlights	Illuminates dark areas under furniture
Large Dust Cup	Easy-empty, no-touch dirt disposal
Multi-Attachment Kit	Includes crevice tool, dusting brush, pet power brush
Power Switch	Turns vacuum on/off
Brushroll Control	Activates/deactivates brushroll for hard floors
Suction Control	Adjusts suction power for different surfaces
Handle Controls	On/off and settings accessible on handle

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

Attach wand: Insert wand into floor nozzle until it clicks.
Connect hose: Attach hose to wand and main body ports.
Install attachments: Store on back caddy or connect as needed.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from moving parts.

First-Time Use

Before cleaning, perform initial setup.

Check filters: Ensure pre-motor and post-motor filters are installed.
Empty dust cup: Ensure dust cup is empty before use.
Select mode: Choose upright or Lift-Away mode based on cleaning needs.
Adjust settings: Set brushroll and suction appropriate for floor type.

CAUTION! Do not vacuum large objects, liquids, or hot ashes.

Specifications

Model: Shark Rotator NV750ANZ.
Technology: Powered Lift-Away, DuoClean.
Filtration: Anti-Allergen Complete Seal with HEPA filter.
Dust Cup Capacity: 1.5 dry quarts.
Cord Length: 25 feet.
Attachments: Crevice tool, dusting brush, pet power brush, upholstery tool.
Power Source: 120V AC, 60Hz.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body.

Handle: Power switch, suction control slider, brushroll on/off button.

Body: Lift-Away release button, dust cup release, hose connector.

Settings: Suction control (High/Low), brushroll on/off for hard floors, power switch. Indicators: LED lights on floor nozzle, filter check light (if equipped).

Using Attachments

For above-floor cleaning: Use Lift-Away mode.

Detach canister: Press Lift-Away release button.
Select attachment: Connect desired tool to hose or wand.
Clean: Use for upholstery, ceilings, crevices, etc.
Reattach: Return canister to dock on main body.

Tip: Use pet power brush for pet hair on furniture.

Cleaning Modes

Two primary modes: Upright and Lift-Away.

Upright mode: For floor cleaning with DuoClean nozzle.
Lift-Away mode: Detach canister for portable cleaning.
Brushroll settings: On for carpets, off for hard floors.
Suction settings: High for deep carpet, Low for delicate rugs.

WARNING! Do not run vacuum with blocked hose or nozzle.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: When dirt reaches MAX line.
Clean filters: Rinse pre-motor filter monthly; replace HEPA filter every year.
Check brushroll: Remove debris wrapped around brushroll regularly.
Inspect hose/wand: Clear clogs if suction reduces.

CAUTION! Unplug vacuum before maintenance. Allow filters to dry completely before reinserting.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug connection; try different outlet; ensure power switch is on.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for blockages.
Brushroll not spinning	Debris/obstruction	Turn off and unplug; remove debris from brushroll; ensure brushroll is set to ON.
Vacuum overheats	Clogged filter/full dust cup	Clean filters; empty dust cup; allow vacuum to cool for 60 minutes.
Canister not docking	Misalignment	Ensure canister is aligned properly with main body; press until it clicks.

Reset: Unplug for 60 minutes to reset thermal protector.

Service: 1-800-798-7398; sharkclean.com