Shark Rotator NV680 N Series Vacuum Cleaner Manual

The Shark Rotator NV680 N Series is a versatile upright vacuum cleaner featuring Powered Lift-Away technology, DuoClean floor nozzle, Anti-Allergen Complete Seal with HEPA filter, LED headlights, and a large-capacity dust cup. It is designed for deep cleaning on carpets and hard floors, capturing dust, debris, and allergens. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, DuoClean floor nozzle, Lift-Away pod, hose, wand, and various attachments.

FeatureDescription
Powered Lift-AwayDetachable pod for portable above-floor cleaning
DuoClean Floor NozzleDual-brushroll system for carpets and hard floors
Anti-Allergen Complete SealSealed system with HEPA filter to trap 99.9% of dust and allergens
LED HeadlightsIlluminates debris under furniture and in dark areas
Large Dust CupEasy-empty, bagless dust cup with XL capacity
Multi-Surface BrushrollAuto-adjusts for different floor types
Advanced Swivel SteeringManeuvers easily around furniture and obstacles
Attachments IncludedPet Multi-Tool, Crevice Tool, Dusting Brush, Upholstery Tool
Power SwitchTurns vacuum on/off
Brushroll ControlEnables/disables brushroll for delicate rugs

Assembly & Setup

Unpack all parts from the box. Assemble on a flat, stable surface.

  1. Attach the handle: Insert the handle into the top of the vacuum body until it clicks into place.
  2. Connect the hose: Attach the hose to the port on the front of the vacuum; ensure it is secure.
  3. Attach the wand: Insert the wand into the hose grip until it locks.
  4. Install the floor nozzle: Slide the nozzle onto the bottom of the vacuum until it clicks.
  5. Plug into a standard 120V AC outlet.

WARNING! Ensure all parts are firmly connected before use. Keep fingers away from moving parts.

First-Time Use

Before first use, ensure the dust cup and filters are installed correctly.

  1. Check filters: Remove and inspect the HEPA filter and pre-motor filter; reinstall securely.
  2. Select cleaning mode: For upright cleaning, ensure the floor nozzle is attached. For Lift-Away mode, press the release button to detach the pod.
  3. Adjust settings: Use the brushroll switch to enable/disable brushroll as needed.
  4. Begin vacuuming: Turn on the power switch and push the vacuum forward.

CAUTION! Do not vacuum wet spills, large objects, or hot ashes. Keep hair and loose clothing away from brushroll.

Specifications

Controls and Settings

Main controls located on the handle and body. Handle: Power switch, brushroll on/off button. Body: Lift-Away release button, dust cup release, hose port.

Settings: Upright mode (for floors), Lift-Away mode (for stairs and above-floor cleaning), brushroll on (carpets), brushroll off (hard floors/rugs).

LED lights automatically turn on when vacuum is powered. Use the suction control slider on the hose for delicate surfaces.

Using Attachments

Attach tools to the wand or hose for specialized cleaning.

  1. Detach the wand from the floor nozzle if in upright mode.
  2. Select an attachment (e.g., Pet Multi-Tool for pet hair).
  3. Insert the attachment into the end of the wand or hose until it clicks.
  4. Use the suction control slider to adjust power as needed.

Tip: For high-reach cleaning, use the wand with the crevice tool. For furniture, use the upholstery tool.

Cleaning Modes

Two primary modes: Upright and Lift-Away.

  1. Upright Mode: For floor cleaning. Push vacuum forward; the brushroll automatically adjusts.
  2. Lift-Away Mode: Press the release button to detach the pod. Carry it to clean stairs, curtains, or ceilings.
  3. Above-Floor Cleaning: Use attachments with the hose and wand for furniture, vents, and corners.
  4. Brushroll Settings: Turn brushroll off for delicate rugs or hard floors to prevent scattering debris.

WARNING! Do not use the vacuum to pick up sharp objects, which may damage the dust cup or hose.

Maintenance

Regular maintenance ensures optimal performance.

  1. Empty Dust Cup: Press the release button to remove the dust cup; empty contents into trash.
  2. Clean Filters: Remove HEPA and pre-motor filters every month; tap gently to remove dust or rinse under cold water (air dry 24 hours).
  3. Check Brushroll: Regularly remove hair and debris wrapped around the brushroll. Use scissors if necessary.
  4. Inspect Hose and Nozzle: Clear any clogs using a long, flexible object.

CAUTION! Always unplug the vacuum before performing maintenance. Do not use damaged filters.

Care & Storage

Store in a cool, dry place. Wrap the cord around the cord hooks on the back of the vacuum.

CAUTION! Do not store near heat sources or with a wet dust cup/filters. Keep out of reach of children.

Regulatory Information

This vacuum cleaner complies with FCC Part 15 Subpart B for Class B digital devices. It is designed for household use only. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower cord/outletCheck that the vacuum is plugged in; try a different outlet.
Loss of suctionFull dust cup/clogEmpty dust cup; check hose, nozzle, and filters for blockages.
Brushroll not spinningDebris/switchClear brushroll of tangled debris; ensure brushroll is set to ON.
Vacuum overheatingClog/filterTurn off and unplug; check for clogs; clean or replace filters.
Unusual noiseForeign objectTurn off and inspect hose, nozzle, and brushroll for obstructions.

Reset: Unplug for 60 minutes if motor overheats; plug back in.

Service: 1-800-798-7398; sharkclean.com

Shark Rotator NV680 N Series Vacuum Cleaner Manual © - All Rights Reserved 2025