Shark Rotator NV600ANZ Series Vacuum Cleaner Manual

The Shark Rotator NV600ANZ Series is a versatile upright vacuum cleaner featuring Powered Lift-Away technology, DuoClean floor nozzle, Anti-Allergen Complete Seal, LED headlights, and a large-capacity dust cup. It includes multiple attachments for above-floor cleaning, a wand, and a hose. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, DuoClean floor nozzle, Lift-Away pod, wand, hose, dust cup with filter, and accessory attachments.

Feature	Description
Powered Lift-Away	Detachable pod for portable above-floor cleaning
DuoClean Floor Nozzle	Dual-brushroll system for carpets and hard floors
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
LED Headlights	Illuminates dark areas under furniture
Large Capacity Dust Cup	Easy-empty, bagless dust cup
Multi-Attachment Set	Includes crevice tool, dusting brush, pet power brush, etc.
Adjustable Handle	Ergonomic handle with controls
Power Switch	Turns vacuum on/off
Brushroll Control	Engages/disengages floor nozzle brushroll
Suction Control	Adjusts suction power for different surfaces

Assembly & Setup

Unpack and inspect all components. Assemble before first use.

Attach wand: Insert wand into upright body until it clicks.
Attach hose: Connect hose to wand and pod ports.
Install floor nozzle: Slide nozzle onto wand until it locks.
Attach accessories: Store attachments on holder or pod.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Use

Before first use, ensure all filters are installed and dust cup is empty.

Check filters: Ensure pre-motor and post-motor filters are in place.
Empty dust cup: Press release button to remove and empty dust cup.
Select mode: Choose upright or Lift-Away mode based on cleaning needs.
Adjust settings: Set suction power and brushroll as needed for floor type.
Begin cleaning: Turn on power switch and start vacuuming.

CAUTION! Do not use on wet surfaces. Keep hair, loose clothing, and fingers away from moving parts.

Specifications

Model Series: NV600ANZ.
Technology: Powered Lift-Away, DuoClean.
Filtration: Anti-Allergen Complete Seal with HEPA filter.
Dust Cup Capacity: 1.5 quarts (dry).
Cord Length: 25 feet.
Attachments: Crevice tool, dusting brush, pet power brush, upholstery tool.
Power Source: 120V AC, 60Hz.
Warranty: Limited 5-year warranty (see manual for details).
Weight: Approximately 15 lbs.

Controls and Settings

Main controls located on handle and body.

Handle Controls: Power switch, suction control slider, brushroll on/off button.

Body Controls: Lift-Away release button, dust cup release, hose release.

Settings: Suction control (High/Low for carpets/delicate rugs), brushroll on/off (for hard floors or area rugs), handle height adjustment (for carpet pile).

Using Attachments

For above-floor cleaning, use Lift-Away mode with attachments.

Detach pod: Press Lift-Away release button to separate pod from upright.
Select attachment: Choose appropriate tool (e.g., crevice tool for tight spaces).
Connect: Attach tool to hose or wand end.
Clean: Turn on power and clean surfaces (upholstery, ceilings, etc.).
Reattach: Return pod to upright body until it clicks.

Tip: Use pet power brush for pet hair on furniture; dusting brush for shelves.

Cleaning Modes

Two main modes: Upright and Lift-Away.

Upright mode: For floor cleaning. Use DuoClean nozzle on carpets/hard floors.
Lift-Away mode: Detach pod for portable cleaning of stairs, furniture, etc.
Handheld mode: Remove pod and use with hose and attachments for spot cleaning.
Above-floor mode: Use wand and attachments without pod for extended reach.

WARNING! Do not use vacuum to pick up liquids, sharp objects, or hot ashes.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust cup: When full or after each use. Press release button to remove.
Clean filters: Rinse pre-motor filter monthly; replace post-motor HEPA filter every year.
Check brushroll: Remove debris (hair, strings) from brushroll regularly.
Inspect hose/wand: Clear clogs if suction reduces.
Store properly: Wrap cord around hooks; store in dry area.

CAUTION! Unplug before maintenance. Allow filters to dry completely before reinserting.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398. This product is covered by a limited warranty; refer to warranty card for details.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check plug connection; try different outlet; ensure power switch is on.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, wand, and nozzle for clogs; clean filters.
Brushroll not spinning	Debris/engagement	Turn off and unplug; remove debris from brushroll; ensure brushroll is engaged.
Vacuum overheating	Clog/filter	Turn off and unplug; let cool; check for clogs; clean or replace filters.
Lift-Away pod not detaching	Release button/lock	Press release button firmly; ensure pod is properly seated when reattaching.

Reset: Turn off and unplug for 30 minutes if overheating occurs.

Service: 1-800-798-7398; sharkclean.com