Shark ROTATOR NV520Q Series Vacuum Cleaner Manual

The Shark ROTATOR NV520Q Series is a versatile upright vacuum cleaner featuring Powered Lift-Away technology, DuoClean PowerFins brushroll, Anti-Allergen Complete Seal Technology, and a HEPA filter. It includes multiple attachments for above-floor cleaning, a large-capacity dust cup, LED headlights, and various cleaning modes. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum unit with DuoClean PowerFins brushroll, Lift-Away pod, wand, hose, and attachments (crevice tool, dusting brush, pet multi-tool, upholstery tool).

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

1. Attach wand: Insert wand into main unit until it clicks.
2. Connect hose: Attach hose to wand and main unit ports.
3. Install attachments: Store on back caddy or connect as needed.
4. Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid injury.

First-Time Use

Plug in vacuum; follow operational steps.

1. Select cleaning mode: Press POWER/SETTINGS to choose Hard Floor, Carpet, or Max.
2. Adjust height: Unit auto-adjusts on carpets; use brushroll control on hard floors.
3. Empty dust cup: Press release button to remove and empty when full.
4. Use attachments: Detach wand and connect desired tool for above-floor cleaning.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings.

Specifications

• Model Series: NV520Q.
• Technology: Powered Lift-Away, DuoClean PowerFins.
• Filtration: Anti-Allergen Complete Seal with HEPA filter.
• Attachments: Crevice tool, dusting brush, pet multi-tool, upholstery tool.
• Dust Cup Capacity: XL capacity (exact volume per model).
• Cord Length: Extended length cord (exact feet per model).
• Power Source: 120V AC, 60Hz.
• Warranty: Limited warranty as per Shark policy.

Controls and Settings

Main unit controls: POWER/SETTINGS button, LIFT-AWAY release, brushroll control, wand release.

Cleaning Modes: Hard Floor (brushroll off), Carpet (auto-adjust), Max (maximum suction).

Filtration: HEPA filter and foam filter require regular cleaning/replacement. Dust Cup: Easy-empty, no-touch design with release button. Attachments: Connect to wand or hose for above-floor cleaning.

Using Attachments

Attachments: Crevice tool, dusting brush, pet multi-tool, upholstery tool.

1. Detach wand: Press wand release button.
2. Connect tool: Insert tool into wand or hose end.
3. Select mode: Use appropriate cleaning mode for surface.
4. Store: Return tools to back caddy after use.

Tip: Use pet multi-tool for pet hair on furniture; crevice tool for tight spaces.

Cleaning Modes

Three modes: Hard Floor, Carpet, Max.

1. Hard Floor: Brushroll off to prevent scattering debris.
2. Carpet: Auto-adjusts height; brushroll on for deep cleaning.
3. Max: Maximum suction for high-pile carpets or heavy dirt.
4. Switch modes: Press POWER/SETTINGS button to cycle.
5. Lift-Away mode: Detach pod for portable cleaning above floors.

WARNING! Do not use on wet surfaces. Unplug before maintenance.

Maintenance & Care

Regular maintenance ensures optimal performance.

1. Empty dust cup: When full or after each use.
2. Clean filters: Rinse HEPA and foam filters monthly; air dry 24 hours.
3. Check brushroll: Remove debris (hair, strings) regularly.
4. Inspect hose/wand: Clear clogs if suction reduces.

CAUTION! Unplug before maintenance. Do not use damaged parts.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 10 minutes; plug back in.

Service: 1-800-798-7398; sharkclean.com