Shark ROTATOR NV500RWK Vacuum Cleaner Manual

The Shark ROTATOR NV500RWK is a versatile upright vacuum cleaner with Powered Lift-Away technology, DuoClean floor nozzle, Anti-Allergen Complete Seal, LED headlights, and advanced swivel steering. It features multiple cleaning modes, a large dust cup, washable filters, and various attachments for whole-home cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum body with motor, DuoClean floor nozzle, Lift-Away pod, wand, hose, and accessory storage caddy.

Assembly & Setup

Unpack all parts and inspect contents. Assemble on a flat, stable surface.

1. Attach the wand: Insert the wand into the vacuum body until it clicks.
2. Connect the hose: Attach hose end to the designated port on the vacuum.
3. Install floor nozzle: Align nozzle with the wand connection and push until secure.
4. Mount accessories: Place attachments in the storage caddy on the vacuum.
5. Plug into a standard 120V AC outlet.

WARNING! Ensure all parts are securely connected before use. Keep fingers away from moving parts.

First-Time Use

Before first use, charge the vacuum (if applicable) and perform a test run.

1. Power on: Press the power button on the handle.
2. Select cleaning mode: Use the mode selector switch for Upright or Lift-Away.
3. Adjust suction: Use the suction control slider on the handle for different surfaces.
4. Test attachments: Connect the crevice tool or dusting brush for above-floor cleaning.
5. Empty dust cup: After initial use, press the release button to empty the cup.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Avoid vacuuming cords.

Specifications

• Model: Shark ROTATOR NV500RWK.
• Type: Upright vacuum with Lift-Away technology.
• Motor: Advanced, high-efficiency motor.
• Filtration: Anti-Allergen Complete Seal with washable foam and felt filters.
• Dust Cup Capacity: 1.3 dry quarts.
• Cord Length: 25 feet.
• Attachments: Crevice tool, dusting brush, pet power brush, upholstery tool.
• Weight: Approximately 15 lbs.
• Power Source: 120V AC, 60Hz.
• Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on the handle and body. Handle: Power button, suction control slider, hose release button. Body: Mode selector (Upright/Lift-Away), dust cup release, filter access.

Settings: Suction control (Low/High for delicate surfaces or deep cleaning). Cleaning mode selector (Upright for floors, Lift-Away for stairs and above-floor). Brush roll switch (On/Off for hard floors).

Cleaning Modes

Upright Mode: For carpet and hard floor cleaning. Lift-Away Mode: Detach pod for portable cleaning of stairs, furniture, and ceilings. Handheld Mode: Use with attachments for spot cleaning. Under-Appliance Mode: Low-profile design for cleaning under furniture.

1. Select mode with the mode selector switch.
2. For Lift-Away, press the release button and lift the pod from the docking station.
3. Attach desired tool to the hose or wand.
4. Power on and begin cleaning.

Tip: Use Low suction for delicate rugs and High suction for embedded dirt.

Using Attachments

Attachments store on the vacuum caddy. Includes crevice tool, dusting brush, pet power brush, upholstery tool.

1. Remove attachment from caddy.
2. Connect to the end of the hose or wand until it clicks.
3. Power on and use for targeted cleaning.
4. Pet Power Brush: For removing pet hair from carpets and furniture.
5. Crevice Tool: For tight spaces like corners and between cushions.
6. Dusting Brush: For delicate surfaces like blinds and lampshades.
7. Upholstery Tool: For sofas, chairs, and curtains.

WARNING! Do not use attachments to vacuum liquids or sharp objects.

Maintenance

Regular maintenance ensures optimal performance. Empty dust cup after each use. Clean filters monthly. Check brush roll for obstructions weekly.

1. Empty dust cup: Press release button, remove cup, and empty into trash.
2. Clean filters: Remove foam and felt filters, rinse with cold water, and air dry for 24 hours.
3. Clear brush roll: Turn off vacuum, remove nozzle, and cut away hair or fibers.
4. Inspect hose and wand: Remove clogs with a long object.

CAUTION! Always unplug vacuum before maintenance. Ensure filters are completely dry before reinserting.

Care & Storage

Store in a cool, dry place. Wrap cord around cord hooks. Empty dust cup and clean filters before storage.

CAUTION! Do not store vacuum with wet filters. Avoid extreme temperatures and direct sunlight.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug vacuum for 60 minutes to reset thermal protector.

Service: 1-800-798-7398; www.sharkclean.com