Shark ROTATOR NV341 Series Vacuum Cleaner Manual

The Shark ROTATOR NV341 Series is a versatile upright vacuum cleaner featuring Powered Lift-Away technology, DuoClean floor brush, Anti-Allergen Complete Seal, LED headlights, and a variety of attachments for whole-home cleaning. This manual covers safety instructions, assembly, operation, maintenance, troubleshooting, and warranty information for optimal performance and longevity.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Components 6. Cleaning Modes 7. Using Attachments 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body, Powered Lift-Away pod, DuoClean floor nozzle, Hose with wand, Dust cup, and various attachments.

Feature	Description
Powered Lift-Away	Detachable pod for portable above-floor cleaning
DuoClean Floor Nozzle	Dual-brushroll system for carpets and hard floors
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
LED Headlights	Illuminates dark areas under furniture
Large Dust Cup	Easy-empty, bagless dirt container
Multi-Surface Brushroll	Automatically adjusts between floor types
Fingertip Controls	On-board buttons for power, brushroll on/off, and suction settings
Wand Release Pedal	Foot pedal to detach cleaning wand
Attachment Storage	Caddy on back for storing tools
Hose & Wand	Extendable for above-floor cleaning

Assembly & Setup

Unpack all components and inspect for damage. Assemble on a flat, stable surface.

Attach the handle: Insert the handle into the main body until it clicks securely into place.
Install the floor nozzle: Align the nozzle with the front of the vacuum and push until it locks.
Connect the hose: Insert the hose end into the port on the back of the vacuum.
Attach the wand: Insert the wand into the hose grip until it clicks.
Store attachments: Place the crevice tool, dusting brush, and upholstery tool in the back caddy.

WARNING! Ensure the vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug the power cord into a standard 120V outlet. Ensure the dust cup is empty and filters are installed.

Select cleaning mode: For floors, use upright mode. For stairs or furniture, press the Lift-Away release button.
Adjust suction: Use the suction control slider on the handle for high or low power.
Engage brushroll: Press the brushroll on/off button on the handle for carpets; turn off for hard floors or delicate rugs.
Empty dust cup: Press the dust cup release button and empty contents into trash when full.

CAUTION! Keep hair, loose clothing, and fingers away from brushroll and openings during operation.

Specifications

Model Series: NV341 (includes NV341, NV342, NV343 variants).
Technology: Powered Lift-Away, DuoClean, Anti-Allergen Complete Seal.
Power Source: 120V, 60Hz, 8.5 Amps.
Cord Length: 25 feet.
Dust Cup Capacity: 1.1 dry quarts.
Filtration: HEPA filter, foam filter, and felt filter.
Attachments Included: Crevice tool, dusting brush, upholstery tool, pet multi-tool (varies by model).
Weight: Approximately 15 lbs.
Warranty: 5-year limited warranty (see manual for details).

Controls and Components

Main body controls: POWER button, SUCTION CONTROL slider, BRUSHROLL ON/OFF button, LIFT-AWAY RELEASE button.

Floor Nozzle: LED lights, brushroll access latch, DuoClean brushes. Hose & Wand: Wand release pedal, hose grip with attachment holder. Dust Cup Assembly: Empty button, pre-motor filter, HEPA filter.

Settings: Suction (High/Low), Brushroll (On/Off), Mode (Upright/Lift-Away). Indicators: Filter check light (if equipped).

Cleaning Modes

Upright Mode: For carpets and large floor areas. Lift-Away Mode: Detach pod for stairs, furniture, and above-floor cleaning.

To activate Lift-Away: Press the release button on the back and lift the pod away from the floor nozzle.
Use attachments: Connect tools directly to the hose or wand for detailed cleaning.
Return to upright: Place the pod back onto the floor nozzle until it clicks into place.

Tip: Use high suction for deep carpet cleaning and low suction for delicate surfaces.

Using Attachments

Attachments enhance cleaning for specific tasks.

Crevice Tool: For tight spaces like between cushions and along edges.
Dusting Brush: For delicate surfaces like blinds, lampshades, and keyboards.
Upholstery Tool: For sofas, chairs, and car interiors.
Pet Multi-Tool: Combines bristles and crevice tool for pet hair removal.
To use: Insert attachment into the end of the hose or wand until secure.

WARNING! Do not use attachments to pick up sharp objects, liquids, or hot ashes.

Maintenance & Care

Regular maintenance ensures peak performance. Unplug vacuum before servicing.

Empty dust cup after each use.
Clean filters monthly: Rinse HEPA and foam filters under cold water; air dry for 24 hours.
Check and clear brushroll: Remove debris wrapped around brushroll monthly.
Inspect hose and wand for clogs.
Wipe exterior with a dry cloth.

CAUTION! Do not operate with wet filters. Ensure all parts are completely dry before reassembly.

Regulatory Information

This appliance complies with FCC Part 15 Subpart B. Manufacturer: SharkNinja Operating LLC. For service or questions, visit sharkclean.com or call 1-800-798-7398. Copyright © SharkNinja Operating LLC. All rights reserved.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clog, or dirty filters	Empty dust cup; check hose, wand, and nozzle for blockages; clean filters.
Brushroll not spinning	Debris jam, belt issue, or mode setting	Turn off and unplug; clear brushroll debris; ensure brushroll is set to ON.
Vacuum won't turn on	Power cord, outlet, or internal fault	Check power cord connection; try different outlet; ensure power button is engaged.
Lift-Away pod not detaching	Release button not fully pressed	Press release button firmly while lifting pod away from floor nozzle.
Unusual noise	Foreign object in airway or brushroll	Turn off immediately; inspect and remove obstruction from nozzle, hose, or brushroll.

Reset: Unplug for 60 seconds, then plug back in.

Service: 1-800-798-7398; sharkclean.com