Shark Rocket ZS351Q Series Vacuum Cleaner Manual

The Shark Rocket ZS351Q Series is a lightweight, corded stick vacuum cleaner featuring DuoClean PowerFins technology, Anti-Allergen Complete Seal, LED headlights, a versatile handheld mode, and a variety of attachments for whole-home cleaning. It offers powerful suction, a large dust cup capacity, and is designed for use on both carpets and hard floors. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Parts 6. Cleaning Modes & Attachments 7. Maintenance & Care 8. Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Motorized floor nozzle with DuoClean PowerFins, Handheld vacuum unit, Dust cup with Anti-Allergen Complete Seal, Power cord, LED headlights, and accessory attachments.

Feature	Description
DuoClean PowerFins	Combines a soft roller and PowerFins brush roll for deep carpet cleaning and hard floor pickup
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
LED Headlights	Illuminates hidden debris under furniture and in dark corners
Handheld Mode	Converts to a portable vacuum for above-floor cleaning
Large Dust Cup	Easy-to-empty, no-touch dirt ejection
Versatile Attachments	Includes crevice tool, dusting brush, and pet multi-tool
Power Cord	Long cord for extended reach
Lightweight Design	Easy to carry and maneuver
On-Board Storage	Attachments store on the vacuum for convenience
Washable Filters	Easy to clean and maintain

Assembly & Setup

Unpack all parts and inspect contents. Assemble on a flat, stable surface.

Attach the handle: Insert the handle into the top of the vacuum body until it clicks into place.
Connect the floor nozzle: Align the floor nozzle with the vacuum body and push until it locks.
Install attachments: Store the crevice tool, dusting brush, and pet multi-tool on the designated clips.
Plug into a standard 120V AC outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Do not force parts together.

First-Time Use

Before first use, ensure all filters are installed correctly and the dust cup is empty.

Power on: Press the power button located on the handle.
Select surface setting: Use the brush roll switch (if equipped) for carpets or hard floors.
Begin cleaning: Push the vacuum forward and back in slow, overlapping strokes.
Empty dust cup: Press the release button to detach and empty the dust cup into the trash.

CAUTION! Keep hair, loose clothing, fingers, and feet away from openings and moving parts.

Specifications

Model Series: ZS351Q.
Type: Corded stick vacuum with handheld mode.
Technology: DuoClean PowerFins, Anti-Allergen Complete Seal.
Dust Cup Capacity: [Specify capacity, e.g., 0.5 quarts].
Cord Length: [Specify length, e.g., 25 feet].
Attachments: Crevice tool, dusting brush, pet multi-tool.
Filters: Washable foam and felt filters.
Power Source: 120V AC, 60Hz.
Weight: Lightweight design for easy maneuverability.

Controls and Parts

Main Controls: Power button, Brush roll on/off switch (if applicable), Dust cup release button.

Key Parts: Motorized floor nozzle, Vacuum body with handle, Dust cup, Filters (pre-motor, post-motor), Power cord, LED headlights, Attachment storage clips.

Operation: Power on/off with button. Use brush roll switch for optimal cleaning on different surfaces. Press dust cup release to empty. Convert to handheld by pressing the release button near the handle.

Cleaning Modes & Attachments

Floor Cleaning: Use the motorized floor nozzle for carpets and hard floors. Above-Floor Cleaning: Convert to handheld mode and use attachments.

Crevice Tool: For tight spaces, corners, and along edges.
Dusting Brush: For delicate surfaces, shelves, and blinds.
Pet Multi-Tool: For upholstery, stairs, and pet hair removal.

Tip: For best results on carpets, make several slow passes over high-traffic areas.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

Empty dust cup after each use or when full.
Clean filters monthly: Rinse foam and felt filters with water, air dry completely for 24 hours before reinstalling.
Check for blockages: Inspect the floor nozzle, hose, and dust cup if suction power decreases.
Clean brush roll: Remove wrapped hair or debris from the brush roll regularly.
Inspect power cord: Do not use if cord is damaged.

WARNING! Always unplug the vacuum before performing any maintenance. Do not use without filters installed.

Storage

Store the vacuum in a cool, dry place. Use the wall mount (if included) for upright storage. Ensure all attachments are securely stored on the unit.

CAUTION! Do not store near heat sources or with a wet dust cup or filters.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Not plugged in / Power issue	Ensure plug is securely in outlet; check household circuit breaker.
Loss of suction	Full dust cup / Clog / Dirty filters	Empty dust cup; check for blockages in nozzle, hose, or ducts; clean filters.
Brush roll not spinning	Clog or wrapped debris	Unplug vacuum, clear debris from brush roll ends and chamber.
Vacuum is hot or has a burning smell	Blockage / Motor strain	Immediately turn off and unplug. Check for severe clogs. Allow to cool.
Dust cup is difficult to empty	Dirt compaction	Gently tap the dust cup to loosen debris; clean the cup if necessary.

Reset: Unplug the vacuum for 60 minutes if it overheats, then check for blockages before reuse.

Service: 1-800-798-7398; sharkclean.com