Shark Rocket ZS350 Series Vacuum Cleaner Manual

The Shark Rocket ZS350 Series is a lightweight, corded stick vacuum cleaner featuring a detachable pod for handheld cleaning, a motorized brush roll for carpets and hard floors, a large-capacity dust cup, crevice tool, upholstery tool, and a multi-surface cleaning mode. It is designed for quick cleanups and deep cleaning with powerful suction. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Attachments & Accessories 7. Cleaning Modes & Techniques 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Detachable handheld pod, Motorized brush roll, Large-capacity dust cup with filter, Crevice tool, Upholstery tool, Power cord, and Wall mount.

Feature	Description
Motorized Brush Roll	Deep cleans carpets and agitates debris on hard floors
Detachable Handheld Pod	Converts to a portable vacuum for above-floor cleaning
Large Dust Cup	Holds debris; easy-empty mechanism
Crevice Tool	For tight spaces, corners, and edges
Upholstery Tool	For furniture, stairs, and car interiors
Multi-Surface Mode	Switch between carpets and hard floors
Power Cord	Long reach for extended cleaning
Wall Mount	For convenient storage and charging (if applicable)
Lightweight Design	Easy to carry and maneuver
Filter System	Washable foam and felt filters

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Attach the handle: Insert the handle into the main body until it clicks securely.
Install the floor nozzle: Align the nozzle with the vacuum body and push until it locks.
Attach accessories: Store crevice and upholstery tools on the provided clips or wall mount.
Plug into a standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Do not force parts together.

First-Time Use

Before first use, ensure filters are installed and dust cup is empty.

Check filters: Ensure foam and felt filters are properly seated in the dust cup.
Select surface mode: Use the switch on the floor nozzle for carpets or hard floors.
Power on: Press the power button on the handle.
Begin cleaning: Glide the vacuum forward and back over the surface.
Empty dust cup: Press release button to detach and empty when full.

CAUTION! Keep hair, loose clothing, and fingers away from brush roll while in operation.

Specifications

Model Series: ZS350.
Type: Corded stick vacuum with handheld pod.
Power Source: 120V AC, 60Hz.
Cord Length: Approximately 25 feet.
Dust Cup Capacity: 0.5 dry quarts.
Filters: Washable foam and felt filter system.
Weight: Less than 10 lbs (assembled).
Attachments: Crevice tool, upholstery tool, wall mount.
Warranty: Limited 5-year warranty (see documentation).

Controls and Settings

Main controls located on handle and floor nozzle.

Handle: Power button, Release button for handheld pod.

Floor Nozzle: Surface mode switch (Carpet/Hard Floor), Brush roll on/off button.

Dust Cup: Empty button, Filter access latch.

Operation: Press power to start; use mode switch to optimize for surface type. To detach pod, press release button and lift off.

Attachments & Accessories

Use attachments for specialized cleaning tasks.

Crevice Tool: Attach to hose end for narrow spaces, between cushions, along edges.
Upholstery Tool: Attach for cleaning furniture, stairs, drapes, and car seats.
Handheld Pod: Detach for above-floor cleaning, using tools directly.

Tip: Ensure vacuum is off when changing attachments.

Cleaning Modes & Techniques

Optimize cleaning based on surface.

Carpet Mode: Brush roll spins aggressively to lift dirt and pet hair.
Hard Floor Mode: Brush roll speed reduces to scatter debris less.
Handheld Mode: Use pod for stairs, furniture, and tight areas.
Emptying Dust Cup: Hold over trash, press empty button, tap to remove debris.
Cleaning Filters: Rinse foam and felt filters monthly; air dry completely before reinserting.

WARNING! Do not use on wet surfaces. Do not vacuum large hard objects.

Maintenance & Care

Regular maintenance ensures peak performance.

Empty dust cup after each use or when full.
Clean filters monthly: Rinse with water, air dry 24 hours.
Clear brush roll: Remove hair and fibers regularly; press release tabs to access.
Inspect hose for clogs if suction decreases.
Store on wall mount or in a dry area.

CAUTION! Unplug before maintenance. Never use without filters installed.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark and Rocket are registered trademarks. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup, clogged filter or hose	Empty dust cup; clean filters; check hose and nozzle for blockages.
Brush roll not spinning	Obstruction, mode setting	Turn off, unplug, and clear debris from brush roll; ensure in carpet mode.
Vacuum won't turn on	Power source, connection	Check outlet; ensure plug is secure; inspect power cord for damage.
Overheating	Clogged filter, full dust cup	Turn off, unplug, let cool. Empty dust cup and clean filters.
Handheld pod not detaching	Release button not fully pressed	Press release button firmly while lifting pod away.

Reset: Unplug for 60 minutes if motor overheats.

Service: 1-800-798-7398; sharkclean.com