Shark Rocket ZS340 Series Vacuum Cleaner Manual

The Shark Rocket ZS340 Series is a lightweight, corded stick vacuum with powerful suction, a motorized brushroll for carpets and hard floors, a detachable pod for handheld cleaning, swivel steering for maneuverability, multiple attachments (crevice tool, dusting brush, pet multi-tool), a large-capacity dust cup with easy-empty mechanism, and a washable filter system. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Lightweight stick body, Motorized brushroll, Detachable handheld pod, Swivel steering, Large-capacity dust cup, Washable foam and felt filters, On-board attachment holder.

Assembly & Setup

Unpack all parts from the box. Assembly is quick and tool-free.

1. Attach the handle: Slide the handle onto the main stick body until it clicks into place.
2. Install the floor nozzle: Align the nozzle with the connector on the stick and push until it clicks.
3. Attach the hose (for handheld mode): Connect the hose to the pod and the desired cleaning tool.
4. Store attachments: Clip the crevice tool and dusting brush onto the designated holder on the stick.
5. Plug in: Ensure the power cord is fully unwound before plugging into a standard 120V outlet.

WARNING! Do not use the vacuum if any parts are damaged. Ensure all connections are secure before operation.

First-Time Use

Before first use, ensure filters are installed and the dust cup is empty.

1. Check filters: Verify the foam and felt filters are correctly seated in the dust cup lid.
2. Power on: Press the power button on the handle. The brushroll will begin to spin.
3. Select surface setting: For hard floors, ensure the brushroll is on. For delicate rugs, you may lift the handle to disengage the brushroll.
4. Begin cleaning: Push the vacuum forward and back in smooth, overlapping strokes.
5. Empty dust cup: Press the release button to detach the cup and empty contents into trash.

CAUTION! Keep hair, loose clothing, fingers, and feet away from openings and moving parts.

Specifications

• Model Series: ZS340, ZS341, ZS342 (varies by kit).
• Type: Corded Stick Vacuum with detachable handheld.
• Power Source: 120V, 60Hz, AC.
• Cord Length: Approximately 25 feet.
• Dust Cup Capacity: 0.5 dry quarts.
• Filtration: Washable foam and felt filter system.
• Attachments Included: Motorized floor nozzle, Crevice tool, Dusting brush, Pet Multi-Tool (varies by model).
• Weight: Approximately 7.5 lbs (stick mode).
• Warranty: Limited 5-year warranty (see manual for details).

Controls and Parts

Main Handle: POWER button, Hose release button. Floor Nozzle: Brushroll ON/OFF switch (on some models), LED headlights.

Key Parts: Main stick body, Handle with controls, Motorized floor nozzle, Detachable pod, Dust cup with filter lid, Hose, On-board attachment holder, Power cord with wrap hooks.

Operation: Press POWER to start/stop. Press hose release button to detach pod for handheld use. Use brushroll switch (if equipped) to turn brushroll on/off for delicate rugs.

Using Attachments

Detach the pod to use the vacuum as a handheld cleaner for stairs, upholstery, and cars.

1. Detach the pod: Press the release button on the handle and lift the pod away from the stick.
2. Choose an attachment: Connect the Pet Multi-Tool, crevice tool, or dusting brush directly to the pod or to the hose.
3. Connect the hose (optional): For extended reach, attach the hose between the pod and the tool.
4. Clean above floors: Use the handheld unit to clean furniture, blinds, ceilings, and car interiors.

Tip: The Pet Multi-Tool combines a bristle brush and upholstery tool for effective pet hair removal.

Cleaning Modes

Three primary cleaning modes: Full-size stick mode, Handheld mode, Under-appliance mode.

1. Stick Mode: For daily floor cleaning. Use the full-length vacuum with motorized nozzle.
2. Handheld Mode: For spot cleaning and above-floor surfaces. Detach the pod.
3. Under-Appliance Mode: The floor nozzle lies flat to clean under low-clearance furniture.
4. Brushroll Control: On some models, a switch on the nozzle turns the brushroll off for delicate area rugs.

WARNING! Do not use the vacuum to pick up liquids, large hard objects, or burning materials.

Maintenance & Care

Regular maintenance ensures peak performance and longevity.

Empty Dust Cup: Empty after each use or when the full line is reached. Press release button, remove cup, and empty into trash.

Clean Filters: Rinse foam and felt filters with cold water every month. Allow to air dry completely for 24 hours before reinstalling.

Clear Brushroll: Regularly remove hair and debris wrapped around the brushroll. Use scissors to cut and remove strands if necessary.

Check for Blockages: If suction is reduced, check the nozzle, hose, pod, and dust cup for clogs.

CAUTION! Always unplug the vacuum before performing any maintenance. Do not use the vacuum with wet filters.

Safety Information

Read all instructions before use. To reduce risk of fire, electric shock, or injury:

• Use only as described in this manual.
• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy.
• Do not use with damaged cord or plug.
• Do not pull or carry by cord, use cord as a handle, or close a door on cord.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Turn off all controls before unplugging.

Warranty & Support

The Shark Rocket ZS340 Series is backed by a limited 5-year warranty against defects in materials and workmanship under normal household use. Proof of purchase is required. This warranty does not cover normal wear and tear, damage from misuse, or commercial use. For warranty service or product support, visit sharkclean.com or call 1-800-798-7398.

Troubleshooting

Reset: Unplug the vacuum for 60 seconds, then plug back in.

Service: 1-800-798-7398; sharkclean.com