Shark Rocket Vacuum Cleaner Manual

The Shark Rocket Vacuum Cleaner is a versatile, lightweight corded stick vacuum featuring powerful suction, a motorized brushroll for deep carpet cleaning and hard floor pickup, multiple cleaning modes, a detachable pod for portable hand vacuum use, a large dust cup with easy-empty mechanism, washable filters, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Modes 6. Using Attachments 7. Cleaning & Maintenance 8. Emptying the Dust Cup 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Motorized brushroll, Detachable handheld pod, Large capacity dust cup, Washable foam and felt filters, Crevice tool, Upholstery tool, Dusting brush, Power cord with wrap.

Feature	Description
Powerful Suction	Strong motor for deep cleaning carpets and hard floors
Motorized Brushroll	Spins to agitate and lift dirt from carpets
Detachable Pod	Converts to a portable hand vacuum for stairs and furniture
Large Dust Cup	Easy-empty, bagless container
Washable Filters	Foam and felt filters maintain suction; clean with water
Cleaning Modes	Hard Floor, Carpet, and Above-Floor modes
Attachments	Crevice tool, upholstery tool, dusting brush included
Lightweight Design	Easy to carry and maneuver
Cord Wrap	Integrated hooks for neat power cord storage
ON/OFF Switch	Simple power control on the main body

Assembly & Setup

Unpack all parts and inspect for damage. Assemble before first use.

Attach the handle: Slide the upper handle onto the main vacuum body until it clicks into place.
Install the floor nozzle: Align the nozzle with the front of the vacuum and push until it locks.
Connect the hose (for attachments): Attach the hose end to the port on the vacuum pod.
Plug into a standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Do not force parts together.

First-Time Use

Before first cleaning, prepare the vacuum and area.

Clear the area: Pick up large debris, cords, and small objects that could clog the vacuum.
Check filters: Ensure both foam and felt filters are properly installed in the dust cup.
Select mode: Use the brushroll switch for carpets (ON) or hard floors (OFF).
Begin cleaning: Plug in, turn ON, and push vacuum forward and back in overlapping strokes.

CAUTION! Do not vacuum wet spills, burning materials, or sharp objects.

Specifications

Type: Corded Stick Vacuum with Handheld Pod.
Power Source: 120V AC, 60Hz.
Suction Power: High-performance motor.
Dust Cup Capacity: 0.5 dry quarts.
Filters: Washable foam and felt filters.
Brushroll: Motorized, anti-hair wrap technology.
Cord Length: 25 feet.
Attachments: Crevice tool, upholstery tool, dusting brush.
Weight: Approximately 7.5 lbs.
Warranty: Limited 5-year warranty (see manual for details).

Controls and Modes

Main controls located on the vacuum body and handle.

Power Switch: ON/OFF button on the main body. Brushroll Switch: Turns the motorized brushroll ON for carpets or OFF for hard floors and delicate rugs. Detach Button: Releases the handheld pod from the stick. Dust Cup Release: Button to remove the dust cup for emptying.

Cleaning Modes: Floor cleaning with brushroll ON/OFF; Above-floor cleaning with handheld pod and attachments.

Using Attachments

For cleaning above floors, furniture, stairs, and tight spaces.

Detach the pod: Press the release button and lift the handheld pod off the stick.
Select attachment: Connect crevice tool, upholstery tool, or dusting brush to the hose or pod nozzle.
Turn on: Press the power button on the pod to begin suction.
Clean: Move attachment over surfaces; use crevice tool for edges and corners.

Tip: For best results, move attachments slowly over surfaces.

Cleaning & Maintenance

Regular maintenance ensures optimal performance.

Empty dust cup: Empty after each use or when full (see section 9).
Clean filters: Rinse foam and felt filters with water every month; air dry completely for 24 hours before reinstalling.
Clear brushroll: Remove hair and debris wrapped around the brushroll regularly; use scissors if needed.
Check for clogs: If suction is weak, check hose, nozzle, and dust cup for blockages.

WARNING! Always unplug vacuum before performing any maintenance.

Emptying the Dust Cup

Empty the dust cup when debris reaches the MAX fill line.

Turn off and unplug the vacuum.
Press the dust cup release button and lift the cup off the vacuum body.
Hold over a trash can; press the bottom release latch to open the door—debris will fall out.
Close the door firmly until it clicks; reattach the dust cup to the vacuum.

CAUTION! Empty dust cup outdoors or in a well-ventilated area to minimize dust.

Care & Storage

Store vacuum in a cool, dry place.

Wrap power cord around the cord hooks on the back of the vacuum. Store attachments in a bag or hang on a wall mount. Keep vacuum away from heat sources and direct sunlight.

CAUTION! Do not store vacuum with a wet filter or damp dust cup.

Regulatory Information

This vacuum cleaner complies with relevant safety standards. Copyright © SharkNinja Operating LLC. All trademarks are property of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power outlet/switch	Check outlet; ensure power switch is ON; check cord for damage.
Loss of suction	Full dust cup/clogged filter	Empty dust cup; clean filters; check hose and nozzle for clogs.
Brushroll not spinning	Switch setting/hair wrap	Ensure brushroll switch is ON for carpets; clear debris from brushroll.
Vacuum is noisy	Obstruction in airway	Turn off and unplug; check for blockages in hose, nozzle, or dust cup.
Dust cup not attaching	Misaligned/not locked	Align dust cup properly and push until it clicks into place.

Reset: Unplug for 60 seconds, then plug back in.

Service: 1-800-798-7398; sharkclean.com