Shark ROCKET UZ345H Vacuum Cleaner Manual

The Shark ROCKET UZ345H is a lightweight, corded stick vacuum with DuoClean technology, Anti-Allergen Complete Seal, LED headlights, and a versatile design for cleaning carpets and hard floors. It features a detachable pod for handheld cleaning, a large dust cup, and various attachments for above-floor cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Functions 6. Cleaning Modes & Attachments 7. Emptying & Cleaning the Dust Cup 8. Maintenance & Filter Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with DuoClean brushroll, Detachable handheld pod, Dust cup with Anti-Allergen Seal, LED headlights, Power cord, and various cleaning attachments.

Feature	Description
DuoClean Technology	Dual brushrolls for carpets and hard floors
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
LED Headlights	Illuminates dark areas under furniture
Detachable Handheld Pod	Converts to a portable vacuum for above-floor cleaning
Large Dust Cup	Easy-empty, no-touch dirt disposal
Swivel Steering	Maneuvers easily around furniture
Attachments Included	CreVice Tool, Upholstery Tool, Dusting Brush
POWER Button	Turns vacuum on/off
Floor/Surface Selector	Switch between carpet and hard floor settings
Cord Wrap	Integrated hooks for storing power cord

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Attach the handle: Align the handle with the main body until it clicks into place.
Connect the floor nozzle: Insert the nozzle into the front of the vacuum until it locks.
Install attachments: Store attachments on the dock or connect to the handheld pod as needed.
Plug into a standard 120V AC outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Do not force parts together.

First-Time Use

Before cleaning, perform a quick setup.

Check filters: Ensure both foam and felt filters are installed in the dust cup.
Select floor setting: Use the switch on the handle for carpets or hard floors.
Power on: Press the POWER button; LED lights will illuminate.
Test suction: Run the vacuum on a small area to ensure proper operation.

CAUTION! Keep hair, loose clothing, and fingers away from brushrolls and openings.

Specifications

Model: Shark ROCKET UZ345H.
Type: Corded stick vacuum with handheld pod.
Technology: DuoClean, Anti-Allergen Complete Seal.
Attachments: CreVice Tool, Upholstery Tool, Dusting Brush.
Dust Cup Capacity: 0.5 dry quarts.
Cord Length: 25 feet.
Power Source: 120V AC, 60Hz.
Weight: Approx. 8.5 lbs (assembled).
Warranty: 5-year limited warranty.

Controls and Functions

Main handle: POWER button, Floor selector switch. Dust cup: Release button, Empty lever. Handheld pod: Attachment dock, Power trigger.

Operation: Press POWER to start; use floor selector for surface type. To detach pod, press release button near dust cup. For handheld mode, attach desired tool and squeeze trigger.

Cleaning modes: Carpet mode (agitator brushroll on), Hard floor mode (brushroll off for debris pickup). LED lights activate automatically when powered on.

Cleaning Modes & Attachments

Use appropriate mode and tools for different surfaces.

Floors: Use DuoClean nozzle; select CARPET or HARD FLOOR setting.
Above-floor cleaning: Detach pod, connect CreVice Tool for tight spaces, Upholstery Tool for furniture, Dusting Brush for shelves.
Under furniture: LED lights help visibility; swivel steering aids maneuverability.

Tip: For best results on carpets, make slow, overlapping passes.

Emptying & Cleaning the Dust Cup

Empty dust cup when full or after each use for optimal suction.

Unplug vacuum.
Press dust cup release button and lift cup away.
Hold over trash can; press empty lever to open bottom lid.
Close lid securely after emptying.
Reinstall dust cup until it clicks.

WARNING! Always unplug before emptying. Do not use water on dust cup.

Maintenance & Filter Care

Regular maintenance ensures peak performance.

Check and clean filters monthly: Remove foam and felt filters from dust cup; tap gently to remove dust.
Wash filters every 3 months: Rinse with cold water only; air dry completely for 24 hours before reinstalling.
Clear brushrolls: Remove debris wrapped around brushrolls with scissors (unplug first).
Inspect hose and attachments for clogs.

CAUTION! Filters must be completely dry before reinsertion to prevent damage.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark, DuoClean, and Anti-Allergen Complete Seal are trademarks of SharkNinja. For support, visit sharkclean.com or call 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Not plugged in / Power issue	Check power outlet and cord connection; ensure POWER button is pressed.
Loss of suction	Full dust cup / Clog / Dirty filters	Empty dust cup; check hose and nozzle for blockages; clean or replace filters.
Brushroll not spinning	Debris wrapped around roll	Unplug vacuum; clear brushroll of hair and fibers.
Vacuum tip over easily	Handle not locked / Uneven surface	Ensure handle is fully clicked into place; use on stable surface.
Handheld pod not working	Not detached properly / No power	Reattach pod securely; check that main vacuum is powered on.

Reset: Unplug for 60 seconds, then restart.

Service: 1-800-798-7398; sharkclean.com