Shark ROCKET UZ155 Vacuum Cleaner Manual

The Shark ROCKET UZ155 is a lightweight, corded stick vacuum cleaner featuring DuoClean technology, Anti-Allergen Complete Seal, LED headlights, a motorized brushroll for carpets and hard floors, a detachable pod for handheld cleaning, multiple attachments, and a convenient under-appliance wand. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Components 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with DuoClean floor head, detachable handheld pod, wand, crevice tool, dusting brush, upholstery tool, under-appliance wand, and storage dock.

FeatureDescription
DuoClean TechnologyDual brushrolls for carpets and hard floors
Anti-Allergen Complete SealTraps 99.9% of dust and allergens inside the vacuum
LED HeadlightsIlluminates dark areas under furniture
Motorized BrushrollPowerful agitation for deep carpet cleaning
Detachable PodConverts to a handheld vacuum for above-floor cleaning
Under-Appliance WandThin wand for cleaning under low-clearance furniture
Multiple AttachmentsCrevice tool, dusting brush, upholstery tool included
Lightweight DesignEasy to carry and maneuver
Corded PowerConsistent suction without battery runtime limits
Storage DockWall-mountable dock for organized storage

Assembly & Setup

Unpack all components and inspect for damage.

  1. Attach wand to vacuum body: Insert wand into socket until it clicks.
  2. Attach floor head: Connect DuoClean head to wand until secure.
  3. Install attachments: Store crevice tool, dusting brush, and upholstery tool on dock or pod.
  4. Mount storage dock: Use included screws to mount dock on wall at desired height.
  5. Plug power cord into standard 120V outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brushroll during installation.

First-Time Use

Before first use, ensure all parts are securely connected.

  1. Power on: Press the power button on the vacuum body.
  2. Select surface setting: Use brushroll switch for carpets (ON) or hard floors (OFF).
  3. Begin vacuuming: Glide vacuum forward and back over surfaces.
  4. Use attachments: Detach pod for handheld cleaning; attach desired tool.
  5. Empty dust cup: Press release button and empty when full.

CAUTION! Do not vacuum large debris, liquids, or hot ashes. Avoid vacuuming cords or loose fabrics.

Specifications

Controls and Components

Main vacuum body: Power button, brushroll on/off switch, dust cup release, wand release button.

Handheld pod: Power button, accessory socket. Floor head: LED lights, brushroll, suction opening. Wand: Adjustable length, release buttons.

Operation: Power ON/OFF with button; toggle brushroll for carpet/hard floor; detach pod for above-floor cleaning; use wand release to separate sections.

Using Attachments

Attach tools directly to handheld pod or wand.

  1. Crevice tool: For tight spaces, corners, between cushions.
  2. Dusting brush: For delicate surfaces, shelves, blinds.
  3. Upholstery tool: For sofas, chairs, stairs.
  4. Under-appliance wand: For under refrigerators, beds, sofas.

Tip: Ensure pod is securely attached to wand when using floor head.

Cleaning Modes

Two main modes: Floor cleaning and handheld cleaning.

  1. Floor cleaning: Use full vacuum with DuoClean head. Switch brushroll ON for carpets, OFF for hard floors.
  2. Handheld cleaning: Detach pod by pressing release button. Attach desired tool for above-floor cleaning.
  3. Under-appliance cleaning: Attach under-appliance wand to pod for low-clearance areas.
  4. Above-floor cleaning: Use dusting brush or upholstery tool on pod.

WARNING! Do not use vacuum to pick up sharp objects, which may damage brushroll or dust cup.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty dust cup: Press release button; empty when full or after each use.
  2. Clean filters: Rinse foam and felt filters monthly; air dry completely before reinserting.
  3. Clear brushroll: Remove debris wrapped around brushroll; ensure it spins freely.
  4. Check for blockages: Inspect wand, hose, and suction path if suction decreases.
  5. Store properly: Use storage dock; wrap cord around dock hooks.

CAUTION! Unplug vacuum before maintenance. Do not use damaged filters.

Safety Information

Read all instructions before use.

WARNING! To reduce risk of fire, electric shock, or injury, follow all safety instructions.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark, DuoClean, and Anti-Allergen Complete Seal are trademarks of SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Loss of suctionFull dust cup, clog, dirty filtersEmpty dust cup; clear blockages; clean filters.
Brushroll not spinningDebris wrap, belt issueClear debris from brushroll; check for belt damage.
Vacuum won't turn onPower cord, outlet issueCheck power cord connection; try different outlet.
LED lights not workingConnection, powerEnsure floor head is securely attached; check power.
Handheld pod not detachingRelease button stuckPress release button firmly; ensure no debris in latch.

Reset: Unplug vacuum for 10 minutes; plug back in.

Service: 1-800-798-7398; sharkclean.com

Shark ROCKET UZ155 Vacuum Cleaner Manual © - All Rights Reserved 2025