Shark Rocket UV450 Series Vacuum Cleaner Manual

The Shark Rocket UV450 Series is a lightweight, corded stick vacuum cleaner featuring powerful suction, a motorized brushroll, Anti-Allergen Complete Seal Technology with a HEPA filter, a versatile handheld pod, a large dust cup, and multiple attachments for above-floor cleaning. It includes a crevice tool, pet multi-tool, and duster crevice tool. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Parts 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Lightweight stick vacuum body, Motorized brushroll, Handheld pod, Large dust cup with empty button, HEPA filter, Crevice tool, Pet multi-tool, Duster crevice tool, Power cord.

FeatureDescription
Motorized BrushrollDeep cleans carpets and hard floors
Anti-Allergen Complete SealTraps 99.9% of dust and allergens inside the vacuum
HEPA FilterCaptures 99.9% of particles down to 0.3 microns
Handheld PodConverts to a portable handheld vacuum
Large Dust CupEasy-empty, no-touch dirt disposal
Crevice ToolCleans tight spaces and corners
Pet Multi-ToolRemoves pet hair from upholstery and stairs
Duster Crevice ToolCombination tool for dusting and crevices
Power SwitchTurns vacuum on/off
Brushroll On/OffDisengages brushroll for hard floors

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

  1. Attach handle: Insert handle into top of vacuum body until it clicks.
  2. Attach floor nozzle: Connect floor nozzle to vacuum body until secure.
  3. Install filter: Ensure HEPA filter is properly seated in filter compartment.
  4. Store attachments: Hang attachments on storage clips or store separately.

WARNING! Ensure vacuum is unplugged during assembly. Check all connections are secure.

First-Time Use

Plug into standard 120V outlet; follow steps for initial operation.

  1. Select cleaning mode: Use as stick vacuum for floors or detach pod for handheld use.
  2. Adjust brushroll: For hard floors, turn brushroll off using button on floor nozzle.
  3. Empty dust cup: Press empty button to release dirt into trash.
  4. Check filter: Ensure filter is clean before first use.

CAUTION! Keep hair, loose clothing, fingers, and feet away from openings.

Specifications

Controls and Parts

Main body: Power switch, dust cup release, handheld pod release. Floor nozzle: Brushroll on/off button, suction opening.

Handheld Pod: Power switch, attachment port. Attachments: Click into pod or floor nozzle.

Operation: Plug in, turn on power switch. For hard floors, turn brushroll off. To empty, press dust cup release over trash. To convert to handheld, press pod release button and lift off.

Using Attachments

Attach tools to handheld pod or floor nozzle for above-floor cleaning.

  1. Turn off and unplug vacuum before changing attachments.
  2. Select tool: Crevice tool for tight spaces; pet multi-tool for upholstery; duster crevice tool for surfaces.
  3. Insert tool: Push into port on pod or nozzle until it clicks.
  4. Turn on and clean: Use handheld pod for furniture, stairs, ceilings.

Tip: Clear debris from tools after each use to maintain suction.

Cleaning Modes

Supports floor cleaning and handheld cleaning.

  1. Stick vacuum mode: Use for carpets and hard floors; adjust brushroll as needed.
  2. Handheld mode: Detach pod; attach tool; clean upholstery, stairs, cars.
  3. Above-floor cleaning: Use attachments with pod for dusting, crevices.
  4. Empty dust cup: When full, press release button; empty into trash.
  5. Clean filter: Remove and rinse filter monthly; dry completely.
  6. Clear brushroll: Remove debris from brushroll regularly.
  7. Store: Wrap cord around hooks; hang vacuum or store upright.

WARNING! Do not use to pick up liquids or wet debris. Do not use on wet surfaces.

Maintenance & Care

Regular maintenance ensures optimal performance. Unplug before all maintenance.

  1. Empty dust cup after each use.
  2. Clean filter: Rinse HEPA filter under cold water every month; air dry 24 hours.
  3. Clear brushroll: Remove hair and debris from brushroll weekly.
  4. Check for blockages: Inspect hose, nozzle, and attachments if suction reduces.
  5. Store in a dry place.

CAUTION! Do not operate with wet filter. Ensure all parts are completely dry before reassembly.

Safety Information

Read all instructions before use. Keep work area well-lit. Do not use outdoors or on wet surfaces. Do not pick up burning or smoking materials. Do not use without filter installed. Keep cord away from heated surfaces. Unplug before servicing.

WARNING! To reduce risk of fire, electric shock, or injury: Do not leave vacuum unattended when plugged in. Close attention is necessary when used near children.

Regulatory Information

This appliance complies with FCC Part 15. Operation is subject to conditions that it does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark and Rocket are registered trademarks. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower/switchCheck outlet; ensure power switch is on; check cord for damage.
Loss of suctionFull dust cup/clogEmpty dust cup; check for blockages in hose, nozzle, or tools; clean filter.
Brushroll not spinningDebris/switchClear debris from brushroll; ensure brushroll is turned on for carpets.
Vacuum overheatsClog/filterTurn off and unplug; check for clogs; ensure filter is clean and dry.
Handheld pod not workingConnection/powerEnsure pod is securely attached; check power switch on pod.

Service: Do not attempt to repair yourself. Contact Shark Customer Service at 1-800-798-7398 or sharkclean.com.

Shark Rocket UV450 Series Vacuum Cleaner Manual © - All Rights Reserved 2025