Shark Rocket UV425CCO Vacuum Cleaner Manual

The Shark Rocket UV425CCO is a lightweight, corded stick vacuum with UV sanitizing technology, multi-surface cleaning capabilities, and a detachable pod for portable cleaning. It features a motorized brushroll for carpets and hard floors, a HEPA filter, crevice tool, dusting brush, and a large-capacity dust cup. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Attachments & Accessories 7. Cleaning Modes 8. UV Sanitizing Feature 9. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Lightweight stick vacuum body, Motorized brushroll, Detachable pod, UV sanitizing light, HEPA filter, Large dust cup, Crevice tool, Dusting brush.

Feature	Description
UV Sanitizing Light	Kills germs and bacteria on surfaces while vacuuming
Motorized Brushroll	Deep cleans carpets and hard floors
Detachable Pod	Converts to a portable hand vacuum for above-floor cleaning
HEPA Filter	Captures 99.9% of dust and allergens
Large Dust Cup	Easy-empty, no bags required
Crevice Tool	Cleans tight spaces and corners
Dusting Brush	Gentle cleaning for delicate surfaces
POWER Button	Turns vacuum and UV light on/off
Brushroll Switch	Turns brushroll on/off for hard floors
Release Buttons	For detaching pod and accessories

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Attach handle: Insert handle into main body until it clicks into place.
Install floor nozzle: Align floor nozzle with body and push until secure.
Attach hose and wand: Connect hose to wand, then wand to vacuum body.
Insert filter: Place HEPA filter into filter compartment.
Plug into power outlet: Use provided power cord.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from moving parts.

First-Time Use

Plug in vacuum; follow these steps for initial operation.

Power on: Press POWER button; UV light will activate automatically.
Select surface mode: Use brushroll switch for carpets (ON) or hard floors (OFF).
Begin vacuuming: Glide vacuum over surfaces using back-and-forth motions.
Empty dust cup: Press release button to remove and empty when full.

CAUTION! Do not use on wet surfaces. Keep UV light away from eyes and skin.

Specifications

Model: Shark Rocket UV425CCO.
Type: Corded stick vacuum with UV sanitizing.
Power Source: 120V AC, 60Hz.
Filtration: HEPA filter captures 99.9% of particles.
Dust Cup Capacity: 0.5 dry quarts.
Cord Length: 25 feet.
Attachments: Crevice tool, dusting brush.
Weight: 7.5 lbs.
Warranty: 5-year limited warranty.

Controls and Settings

Main controls located on handle and body.

Handle: POWER button (turns vacuum and UV light on/off).

Body: Brushroll switch (ON for carpets, OFF for hard floors), Dust cup release button, Pod release button.

UV Light: Automatically activates when POWER is on; ensure nozzle is flat on surface for proper operation. Filter indicator: Check filter compartment; clean or replace as needed.

Attachments & Accessories

Use attachments for specialized cleaning tasks.

Detach pod: Press pod release button to convert to hand vacuum.
Attach crevice tool: For corners, edges, and tight spaces.
Attach dusting brush: For upholstery, blinds, and delicate surfaces.
Store accessories: Use storage clips on vacuum body.

Tip: Ensure vacuum is off and unplugged when changing attachments.

Cleaning Modes

Supports multiple cleaning configurations.

Stick mode: For floor cleaning with handle attached.
Handheld mode: Detach pod for portable cleaning.
Above-floor mode: Use hose and wand with attachments.
UV sanitizing mode: Keep UV light on surfaces for 10 seconds per pass.
Brushroll on: For carpets and rugs.
Brushroll off: For hard floors like wood and tile.

WARNING! Do not use brushroll on hard floors without turning it off to avoid damage.

UV Sanitizing Feature

UV light kills germs on surfaces; operates automatically when POWER is on.

Ensure nozzle is flat on surface for UV exposure. Move slowly (10 seconds per pass) for effective sanitizing. Do not look directly at UV light; keep away from skin.

Maintenance & Cleaning

Unplug before maintenance. Regular upkeep ensures optimal performance.

Empty dust cup: Press release button; empty into trash.
Clean filter: Rinse HEPA filter monthly; air dry completely before reinserting.
Clear brushroll: Remove debris from brushroll regularly.
Wipe exterior: Use dry cloth; no liquids.

CAUTION! Do not use water on electrical parts. Ensure filter is completely dry before reuse.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. UV light complies with FDA guidelines for consumer devices. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Check power cord connection; try different outlet.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose and nozzle for blockages.
Brushroll not spinning	Debris/tangle	Turn off and unplug; clear brushroll of hair and debris.
UV light not working	Nozzle position	Ensure nozzle is flat on surface; restart vacuum.
Overheating	Filter/clog	Clean filter; check for clogs; allow vacuum to cool.

Reset: Unplug for 30 minutes; plug back in.

Service: 1-800-798-7398; sharkclean.com