Shark Rocket UV380 Series Vacuum Cleaner Manual

The Shark Rocket UV380 Series is a lightweight, corded stick vacuum with powerful suction, a UV sanitizing light, motorized brushroll, swivel steering, and multiple attachments for versatile cleaning. It features a removable pod for handheld use, a large dust cup, washable filters, and various cleaning modes. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes & UV Light 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Removable handheld pod, Motorized brushroll, UV sanitizing light, Swivel steering, Dust cup with empty button, Washable foam and felt filters, Power cord, Various cleaning attachments.

Feature	Description
UV Sanitizing Light	Kills germs and bacteria on surfaces as you clean
Motorized Brushroll	Deep cleans carpets and agitates embedded dirt
Swivel Steering	Provides maneuverability around furniture and obstacles
Removable Pod	Converts to a handheld vacuum for above-floor cleaning
Large Dust Cup	Holds debris; easy-empty button for mess-free disposal
Washable Filters	Foam and felt filters can be rinsed and reused
Power Cord	Long cord for extended reach without changing outlets
Attachments	Includes crevice tool, dusting brush, and upholstery tool
CLEAN/SANITIZE Switch	Toggles UV light on/off for sanitizing mode
POWER Button	Turns vacuum on/off

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Attach handle: Insert handle into main body until it clicks into place.
Install floor nozzle: Align nozzle with connector on vacuum body and push until secure.
Attach hose (if applicable): Connect hose to pod and main body for handheld mode.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching fingers.

First-Time Use

Plug in vacuum; follow these steps.

Select cleaning mode: Use CLEAN/SANITIZE switch for regular cleaning or UV sanitizing.
Adjust suction: Use power slider (if available) for different surfaces.
Begin vacuuming: Press POWER button and push vacuum forward on floor.
Empty dust cup: Press empty button over trash can when full.

CAUTION! Keep UV light away from eyes and skin. Do not use on wet surfaces.

Specifications

Type: Corded stick vacuum with handheld pod.
Suction Power: High-performance motor for deep cleaning.
UV Light: Sanitizes surfaces; kills up to 99.9% of germs*.
Brushroll: Motorized for carpets; anti-hair wrap technology.
Dust Cup Capacity: 0.5 dry quarts.
Filters: Washable foam and felt filters.
Cord Length: 25 feet.
Weight: 7.5 lbs (assembled).
Power Source: 120V AC, 60Hz.

Controls and Settings

Main controls located on handle. Handle: POWER button, CLEAN/SANITIZE switch, Suction slider (if equipped).

Pod Controls: POWER button, Attachment release buttons.

Cleaning Modes: CLEAN (regular vacuuming), SANITIZE (UV light on). Suction Settings: Adjust via slider for carpets/hard floors. Maintenance Indicators: Check filter light (if equipped) when filters need cleaning.

Using Attachments

Attachments include crevice tool, dusting brush, upholstery tool.

Turn off and unplug vacuum before changing attachments.
Remove floor nozzle: Press release button and pull off.
Attach tool: Insert desired tool into hose or pod until it clicks.
Select handheld mode: Detach pod if needed for above-floor cleaning.

Tip: Use crevice tool for tight spaces; dusting brush for shelves; upholstery tool for furniture.

Cleaning Modes & UV Light

Supports regular cleaning and UV sanitizing.

Regular cleaning: Set CLEAN/SANITIZE switch to CLEAN; UV light off.
UV sanitizing: Switch to SANITIZE; UV light activates to kill germs on surfaces.
For best results: Move vacuum slowly over area to allow UV light exposure.
Auto-shutoff: UV light turns off when vacuum is tilted or not in use.

WARNING! UV light is for surface sanitizing only. Do not look directly at light. Keep away from children and pets.

Maintenance & Care

Unplug before maintenance. Empty dust cup after each use. Wash filters monthly.

Empty dust cup: Press release button; empty into trash.
Clean filters: Rinse foam and felt filters under water; air dry 24 hours.
Clear brushroll: Remove debris from brushroll with scissors or tool.
Wipe exterior: Use dry cloth; no liquids on electrical parts.

CAUTION! Do not use vacuum without filters. Ensure filters are completely dry before reinserting.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © SharkNinja Operating LLC. UV light technology patented. For support, visit www.sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord/outlet	Ensure plugged in; check outlet; press POWER firmly.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose and nozzle for blockages.
Brushroll not spinning	Debris/tangle	Turn off and clear hair or debris from brushroll.
UV light not working	Mode switch/fault	Set switch to SANITIZE; ensure vacuum is flat on surface.
Overheating	Filter/clog	Turn off; let cool; clean filters and check for clogs.

Reset: Unplug for 30 minutes; plug back in.

Service: 1-800-798-7398; www.sharkclean.com