Shark Rocket POWERHEAD AH450UKP Vacuum Cleaner Manual

The Shark Rocket POWERHEAD AH450UKP is a lightweight, corded stick vacuum cleaner featuring PowerFins technology for powerful suction and hair removal, a motorized floor nozzle for carpets and hard floors, a detachable pod for above-floor cleaning, multiple attachments, and a swivel steering for easy maneuverability. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Motorized PowerFins floor nozzle, Detachable cleaning pod, Swivel steering handle, Cord wrap, Dust cup with empty-release button, On-board attachment storage.

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

1. Insert wand into floor nozzle: Align arrows and push until it clicks.
2. Attach handle to wand: Slide handle onto top of wand until secure.
3. Plug in power cord: Ensure plug is fully inserted into wall outlet.
4. Store attachments: Clip crevice tool and upholstery tool onto wand.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brushroll.

First-Time Use

Plug in vacuum; press POWER button to start.

1. Select floor type: Use switch on handle for carpets or hard floors.
2. Begin cleaning: Push vacuum forward and back in overlapping strokes.
3. Use attachments: Detach pod for handheld cleaning of stairs, furniture, etc.
4. Empty dust cup: Press empty-release button over trash bin when full.

CAUTION! Do not vacuum wet spills, large objects, or hot ashes.

Specifications

• Model: Shark Rocket POWERHEAD AH450UKP.
• Type: Corded stick vacuum with motorized nozzle.
• Technology: PowerFins brushroll for anti-hair wrap.
• Cleaning Modes: Floor cleaning, handheld pod cleaning.
• Attachments: Crevice tool, upholstery tool, motorized floor nozzle.
• Cord Length: Standard length for room coverage.
• Dust Cup Capacity: Washable, easy-empty container.
• Power Source: Mains electricity (plug-in).
• Weight: Lightweight design for easy carrying.

Controls and Parts

Main controls located on handle. Handle: POWER button, Floor/Surface switch, Wand release button.

Parts: Motorized floor nozzle, Detachable wand, Handle with controls, Dust cup, Crevice tool, Upholstery tool, Power cord with wrap.

Operation: Press POWER to start/stop. Use switch to select floor type. Press wand release to detach pod for handheld use. Use empty-release button to open dust cup.

Cleaning Modes

Two main modes: Floor cleaning with motorized nozzle, Handheld cleaning with detachable pod.

1. Turn off and unplug before switching modes.
2. For floors: Attach wand to nozzle, select floor type, push vacuum across surface.
3. For above-floor: Detach pod, attach desired tool, clean upholstery, stairs, etc.

Tip: Use slow, overlapping passes for deep carpet cleaning.

Maintenance & Emptying

Regular maintenance ensures optimal performance.

1. Empty dust cup: Press release button, empty contents into bin.
2. Clean filters: Remove and rinse foam and felt filters monthly (air dry completely).
3. Check brushroll: Remove debris wrapped around brushroll; ensure it spins freely.
4. Inspect hose and attachments: Clear any blockages.

WARNING! Unplug vacuum before maintenance. Do not use vacuum without filters.

Attachments Guide

Crevice Tool: For tight spaces, corners, edges. Upholstery Tool: For sofas, chairs, stairs. Motorized Floor Nozzle: For carpets and hard floors.

Care & Storage

Unplug and cool before storing. Wrap cord around hooks. Store in dry place.

CAUTION! Do not store with wet filters. Keep away from heat sources.

Regulatory Information

Complies with relevant electrical safety standards. Copyright © SharkNinja Operating LLC. For support, visit sharkclean.com or contact customer service as per regional contact details.

Troubleshooting

Reset: Unplug for 60 seconds if motor overheats.

Service: Refer to sharkclean.com for support or authorized service centers.