Shark Rocket NV480UKP Vacuum Cleaner Manual

The Shark Rocket NV480UKP is a versatile corded stick vacuum cleaner featuring DuoClean PowerFins technology, Anti-Hair Wrap brushroll, LED headlights, a detachable pod for handheld cleaning, multiple accessories, and a 2-year warranty. It is designed for cleaning carpets, hard floors, and above-floor surfaces. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Parts 6. Cleaning Modes & Attachments 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, DuoClean PowerFins floor nozzle, Anti-Hair Wrap brushroll, detachable handheld pod, crevice tool, dusting brush, upholstery tool, and storage dock.

FeatureDescription
DuoClean PowerFinsDual-brushroll system for carpets and hard floors
Anti-Hair Wrap TechnologyPrevents hair tangles on the brushroll
LED HeadlightsIlluminates dark areas under furniture
Detachable PodConverts to a handheld vacuum for above-floor cleaning
Multi-Surface CleaningAdjusts automatically between floor types
Corded PowerConsistent suction without battery runtime limits
Storage DockWall-mountable for organized storage
Accessories IncludedCrevice tool, dusting brush, upholstery tool
Washable FilterReusable foam and felt filter for easy maintenance
2-Year WarrantyManufacturer's warranty for defects

Assembly & Setup

Unpack and inspect all parts. Assemble before first use.

  1. Attach handle: Insert handle into main body until it clicks securely.
  2. Connect floor nozzle: Align nozzle with body and push until it locks.
  3. Install accessories: Attach desired tool to handheld pod or handle end.
  4. Mount storage dock (optional): Secure to wall using provided screws.
  5. Plug into power outlet: Ensure voltage matches local requirements.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from moving parts.

First-Time Use

Before first cleaning, perform initial setup and test.

  1. Check filter: Ensure foam and felt filters are properly seated.
  2. Empty dust cup: Confirm dust cup is empty and securely attached.
  3. Select floor setting: Floor nozzle automatically adjusts; no manual switch needed.
  4. Power on: Plug in, press power button on handle.
  5. Test attachments: Try each accessory to ensure proper connection.

CAUTION! Do not vacuum large objects, liquids, or hot ashes. Avoid pulling by cord.

Specifications

Controls and Parts

Main controls located on handle and body.

Handle: Power button, release button for detaching pod.

Body: Dust cup release button, filter access cover.

Floor Nozzle: LED lights, brushroll, suction opening.

Handheld Pod: Attachment latch, power button (when detached).

Operation: Press power button to start; press again to stop. Use release button to convert to handheld mode. Empty dust cup when full indicator appears.

Cleaning Modes & Attachments

Use appropriate mode and attachment for each surface.

  1. Floor Cleaning: Use floor nozzle for carpets and hard floors.
  2. Above-Floor Cleaning: Detach pod, attach tool (crevice, dusting brush, upholstery).
  3. Furniture & Stairs: Use handheld pod with upholstery tool.
  4. Edges & Corners: Crevice tool for tight spaces.
  5. Dusting: Dusting brush for shelves, blinds, electronics.

Tip: For best results, move vacuum slowly over carpets to allow deep cleaning.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty dust cup: Press release button, empty into trash.
  2. Clean brushroll: Remove debris and hair from brushroll monthly.
  3. Wash filters: Rinse foam and felt filters every 3 months; air dry 24 hours.
  4. Check blockages: Inspect hose, nozzle, and accessories for clogs.
  5. Store properly: Use storage dock or dry, indoor location.

WARNING! Unplug before maintenance. Do not use damaged parts.

Regulatory Information

Complies with relevant safety standards. Copyright © SharkNinja Operating LLC. For UK model: Conforms to EC directives. For support, visit sharkclean.com or contact customer service at 1-800-798-7398 (US) or 0800 862 0453 (UK).

Troubleshooting

SymptomPossible CauseCorrective Action
Loss of suctionFull dust cup, clog, dirty filterEmpty dust cup; check for blockages; clean filter.
Brushroll not spinningHair/debris wrap, obstructionClean brushroll; remove obstruction.
Vacuum won't turn onPower cord, outlet issueCheck plug connection; try different outlet.
LED lights not workingConnection issueEnsure nozzle is properly attached; lights may turn off automatically.
Handheld pod not detachingRelease button not fully pressedPress release button firmly while pulling pod away.

Reset: Unplug for 10 minutes, then restart.

Service: 1-800-798-7398 (US); sharkclean.com

Shark Rocket NV480UKP Vacuum Cleaner Manual © - All Rights Reserved 2025