Shark Rocket HV343AMZ Vacuum Cleaner Manual

The Shark Rocket HV343AMZ is a lightweight, corded stick vacuum cleaner featuring a detachable pod for handheld cleaning, multi-surface brushroll, swivel steering, and a large-capacity dust cup. It is designed for cleaning carpets, hard floors, and above-floor areas. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Parts 6. Cleaning Modes & Attachments 7. Emptying the Dust Cup 8. Brushroll Maintenance 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Detachable handheld pod, Multi-surface brushroll, Swivel steering handle, Large-capacity dust cup, On-board accessory storage, Power cord with wrap.

Feature	Description
Detachable Pod	Converts from stick vacuum to handheld for above-floor cleaning
Multi-Surface Brushroll	Automatically adjusts between carpets and hard floors
Swivel Steering	Provides maneuverability around furniture and obstacles
Large Dust Cup	Holds debris for longer cleaning sessions; easy-empty design
On-Board Storage	Holds crevice tool and upholstery tool on the vacuum body
Power Cord	25-foot cord with wrap for easy storage
POWER Button	Turns vacuum on/off
BRUSHROLL ON/OFF	Enables/disables brushroll for delicate rugs or hard floors
DUST CUP RELEASE	Button to detach dust cup for emptying
POD RELEASE	Button to detach handheld pod unit

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

Attach the handle: Slide the upper handle onto the main vacuum body until it clicks into place.
Install the floor nozzle: Align the nozzle with the connector on the vacuum body and push until it clicks.
Attach accessories: Insert the crevice tool and upholstery tool into the on-board storage clips.
Plug into AC power outlet.

WARNING! Ensure vacuum is unplugged during assembly. Do not force parts together.

First-Time Use

Plug in the vacuum and press the POWER button.

Select cleaning mode: Use as a stick vacuum for floors, or press the POD RELEASE to use as a handheld.
Adjust brushroll: For delicate rugs, press BRUSHROLL OFF. For carpets, ensure BRUSHROLL is ON.
Begin cleaning: Push vacuum forward and back in slow, overlapping strokes.
Use attachments: Detach handheld pod and attach tools for furniture, stairs, or crevices.

CAUTION! Keep hair, loose clothing, fingers, and feet away from openings and moving parts.

Specifications

Model: Shark Rocket HV343AMZ.
Type: Corded stick vacuum with detachable handheld.
Power Source: 120V AC, 60Hz.
Cord Length: 25 feet.
Dust Cup Capacity: 0.5 dry quarts.
Brushroll: Multi-surface, self-adjusting.
Attachments Included: Crevice tool, Upholstery tool.
Filtration: Washable foam and felt filter.
Weight: Approximately 7.5 lbs.

Controls and Parts

Main controls located on the handle. Front of unit houses brushroll and suction inlet.

Handle Controls: POWER button, BRUSHROLL ON/OFF switch, POD RELEASE button.

Main Body: Dust cup with release latch, Suction inlet, On-board accessory clips, Power cord wrap.

Floor Nozzle: Multi-surface brushroll, Swivel steering mechanism.

Attachments: Crevice tool for tight spaces, Upholstery tool for furniture and stairs.

Cleaning Modes & Attachments

Two main modes: Stick vacuum for floors, Handheld pod for above-floor areas.

Stick Vacuum Mode: Use for carpets and hard floors. Engage brushroll for carpets.
Handheld Mode: Press POD RELEASE, detach pod, and attach tool for targeted cleaning.
Crevice Tool: For corners, edges, and between cushions.
Upholstery Tool: For sofas, chairs, stairs, and car interiors.

Tip: For best suction, regularly empty dust cup and clean filters.

Emptying the Dust Cup

Empty dust cup when debris reaches the MAX fill line.

Turn off and unplug the vacuum.
Press the DUST CUP RELEASE button and lift the cup away from the body.
Hold over trash can. Press the bottom release latch to open the door; debris will fall out.
Close the door firmly until it clicks. Reattach dust cup to vacuum until it clicks into place.

WARNING! Do not operate vacuum with a full dust cup. Unplug before emptying.

Brushroll Maintenance

Regularly check and clean brushroll to maintain performance.

Unplug vacuum. Turn unit over to access brushroll.
Remove any wrapped hair, strings, or debris from the brushroll ends and bristles.
Use scissors to carefully cut and remove tangled fibers if necessary.
Ensure brushroll spins freely before resuming use.

CAUTION! Always unplug vacuum before performing any maintenance.

Care & Storage

Unplug and clean exterior with a dry cloth. Store in a dry place.

Filter Care: Wash foam and felt filter every 3 months under tap water. Air dry completely for 24 hours before reinstalling.

Storage: Wrap power cord around cord wraps. Store upright or hang using handle.

CAUTION! Do not immerse vacuum in water or use wet cloths on electrical parts.

Regulatory Information

This appliance complies with FCC Part 15. For service or support, visit sharkclean.com or contact SharkNinja Operating LLC at 1-800-798-7398. Copyright © SharkNinja Operating LLC. All trademarks are property of their respective owners.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	No power/plug	Ensure unit is plugged into a working outlet; check POWER button.
Loss of suction	Full dust cup/clog	Empty dust cup; check hose, nozzle, and inlet for blockages.
Brushroll not spinning	Brushroll off/tangled	Ensure BRUSHROLL is ON; clean debris from brushroll ends.
Vacuum overheats	Clogged filter/full cup	Unplug, let cool for 60 mins. Empty cup, clean filters, check for clogs.
Handheld pod won't detach	Release button not fully pressed	Press and hold POD RELEASE button firmly while pulling pod away.

Reset: Unplug, wait 60 minutes, then plug back in.

Service: 1-800-798-7398; sharkclean.com