Shark Rocket HV308Q Series Vacuum Cleaner Manual

The Shark Rocket HV308Q Series is a lightweight, corded stick vacuum with powerful suction, a motorized brushroll for carpets and hard floors, a detachable pod for portable cleaning, multiple attachments (crevice tool, dusting brush, pet multi-tool), and a large-capacity dust cup. It features a swivel steering head, multiple floor settings, and a washable filter system. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Lightweight stick body with motorized brushroll, Detachable handheld pod, Large-capacity dust cup with washable filter, Swivel steering head, On-board attachment holder, Cord wrap hooks.

Assembly & Setup

Unpack all parts from the box. Ensure all components are present and undamaged.

1. Attach the handle: Align the handle with the top of the stick body and push until it clicks into place.
2. Attach the floor nozzle: Connect the motorized floor nozzle to the bottom of the stick body, ensuring it clicks securely.
3. Install attachments: Slide the crevice tool, dusting brush, and pet multi-tool onto the on-board holder.
4. Plug in the power cord: Ensure the vacuum is off before plugging into a standard 120V outlet.

WARNING! Do not use if any part is damaged. Keep hair, loose clothing, fingers, and feet away from openings and moving parts.

First-Time Use

Before first use, ensure the dust cup and filter are clean and properly installed.

1. Check filter installation: Remove the dust cup and verify the foam and felt filters are in place.
2. Select floor setting: If your model has a floor selector, set it to "CARPET" or "HARD FLOOR" as appropriate.
3. Power on: Press the power button on the handle. The motorized brushroll will engage.
4. Begin cleaning: Push the vacuum forward and back in slow, overlapping strokes.
5. Detach for handheld use: Press the release button to separate the pod from the stick for above-floor cleaning.

CAUTION! Do not vacuum up large objects, liquids, or hot ashes, as this may damage the vacuum.

Specifications

• Model Series: HV308Q.
• Type: Corded stick vacuum with detachable handheld.
• Power Source: 120V AC, 60Hz.
• Cord Length: Approximately 25 feet.
• Dust Cup Capacity: 0.5 dry quarts.
• Filtration: Washable foam and felt filter.
• Attachments: Crevice tool, dusting brush, pet multi-tool (on-board storage).
• Weight: Lightweight design (approx. 7.5 lbs).
• Warranty: Limited warranty included (see manual for details).

Controls and Settings

Main power button on handle. Floor selector switch (on nozzle of some models) toggles between carpet and hard floor settings.

Handle Controls: Power On/Off button. Nozzle Controls: Floor selector (CARPET/HARD FLOOR), Brushroll on/off (if equipped). Pod Release: Button to detach handheld unit.

Operation: Power on to start suction and brushroll. Use floor selector to optimize cleaning for surface type. Press pod release to convert to handheld mode. Use attachment release tabs to switch tools.

Using Attachments

Attachments store on the vacuum body for easy access.

1. Detach the pod: Press the release button to separate the handheld unit from the stick.
2. Select an attachment: Pull the desired tool (crevice, dusting brush, pet tool) from the holder.
3. Connect the attachment: Press it onto the front of the pod until it clicks.
4. Clean: Use the tool for specific tasks—crevice for edges, brush for dusting, pet tool for upholstery.
5. Reattach: To return to stick mode, align the pod with the stick body and push until it clicks.

Tip: For best pet hair removal, use the pet multi-tool on furniture and stairs.

Cleaning Modes

Two primary modes: Full-size stick mode for floors, Detachable handheld mode for above-floor cleaning.

1. Stick Mode: Use for cleaning large floor areas. The motorized brushroll provides deep carpet cleaning.
2. Handheld Mode: Detach the pod for cleaning furniture, stairs, ceilings, and inside cars.
3. Brushroll On/Off: Some models allow you to turn off the brushroll for delicate hard floor cleaning.
4. Floor Setting: Use "CARPET" for embedded dirt and "HARD FLOOR" to prevent scattering debris.

WARNING! Do not use the brushroll on hard floors if it could scatter debris; use the appropriate setting.

Maintenance

Regular maintenance ensures optimal performance.

1. Empty the dust cup: Press the release button to remove the dust cup. Empty contents into trash.
2. Clean the filter: Remove foam and felt filters from dust cup. Rinse with cold water and let air dry for 24 hours before reinstalling.
3. Clear brushroll tangles: Turn off and unplug. Use scissors to cut hair and fibers wrapped around the brushroll.
4. Check for blockages: If suction is reduced, check hose, nozzle, and attachments for clogs.

CAUTION! Do not operate without filters installed. Ensure all parts are completely dry before reassembly.

Care & Storage

Unplug before cleaning or maintenance. Store in a dry place.

Clean exterior with a dry cloth. Do not immerse in water. Wrap power cord around cord hooks for neat storage. Store upright or hang using the handle if possible.

CAUTION! Do not store with a wet filter. Keep away from heat sources and direct sunlight.

Regulatory Information

This appliance complies with FCC Part 15. Operation is subject to the condition that it does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark and Rocket are trademarks of SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Reset: Unplug for 60 minutes if motor overheats, then restart.

Service: 1-800-798-7398; sharkclean.com