Shark Rocket HV301Q Series Vacuum Cleaner Manual

The Shark Rocket HV301Q Series is a lightweight, corded stick vacuum with powerful suction, a motorized brushroll for carpets and hard floors, a detachable pod for handheld cleaning, multiple attachments (crevice tool, dusting brush, pet multi-tool), swivel steering for maneuverability, and a large-capacity dust cup with anti-allergen complete seal technology. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Parts 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Lightweight stick vacuum body, Motorized brushroll, Detachable handheld pod, Large-capacity dust cup, Swivel steering, On-board attachment holder, Power cord with wrap hooks.

Feature	Description
Motorized Brushroll	Deep cleans carpets and hard floors; automatically adjusts height
Detachable Pod	Converts to a handheld vacuum for above-floor cleaning
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the dust cup
Swivel Steering	Provides excellent maneuverability around furniture
Large Capacity Dust Cup	Easy-empty, no-touch dirt disposal
On-Board Attachment Holder	Stores crevice tool and dusting brush on vacuum
Pet Multi-Tool	Specialized attachment for pet hair on upholstery and stairs
POWER/SURFACE Switch	Selects between carpet mode and hard floor mode
Wand Release Pedal	Allows quick detachment of the wand for handheld use
Cord Wrap Hooks	Integrated hooks for neat power cord storage

Assembly & Setup

Unpack all parts from the box and inspect for damage.

Attach the wand: Insert the wand into the vacuum body until it clicks into place.
Attach the floor nozzle: Connect the motorized floor nozzle to the end of the wand.
Install attachments: Place the crevice tool and dusting brush into the on-board holder.
Plug into a standard 120V AC outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Keep fingers and loose clothing away from the brushroll.

First-Time Use

Before first use, ensure all parts are securely connected.

Select floor setting: Use the POWER/SURFACE switch to select CARPET or HARD FLOOR.
Begin vacuuming: Plug in the vacuum, press the power button on the handle, and push forward.
Use swivel steering: Guide the vacuum left and right around obstacles.
For above-floor cleaning: Press the wand release pedal to detach the pod and use as a handheld vacuum with attachments.

CAUTION! Do not vacuum up large objects, liquids, or hot ashes. Do not use on wet surfaces.

Specifications

Model Series: HV301Q.
Type: Corded stick vacuum with detachable handheld.
Floor Settings: Carpet mode and Hard Floor mode.
Dust Cup Capacity: 0.7 dry quarts.
Cord Length: 25 feet.
Attachments Included: Motorized floor nozzle, Crevice tool, Dusting brush, Pet multi-tool.
Filtration: Anti-Allergen Complete Seal with foam and felt filter.

Power Source: 120V AC, 60Hz.

Weight: Approximately 8.5 lbs.

Controls and Parts

Main Handle: Power button, Wand release pedal. Vacuum Body: POWER/SURFACE switch, Cord wrap hooks, Dust cup release button.

Attachments: Motorized floor nozzle (with brushroll), Crevice tool, Dusting brush, Pet multi-tool (for pet hair).

Operation: Select floor type with POWER/SURFACE switch. Press power button on handle to start suction. Use wand release to convert to handheld mode. Emptying: Press dust cup release button to remove and empty cup. Maintenance: Regularly clean filters and check brushroll for obstructions.

Using Attachments

Detach the handheld pod for above-floor cleaning tasks.

Press the wand release pedal and lift the pod off the wand.

Select an attachment: Crevice tool for tight spaces; Dusting brush for shelves and blinds; Pet multi-tool for furniture and stairs.

Insert the chosen attachment into the suction inlet on the pod.

Press the power button on the pod to begin cleaning.

Tip: For best pet hair removal, use the motorized floor nozzle on carpets and the pet multi-tool on upholstery.

Cleaning Modes

Two primary cleaning modes: Floor cleaning and Handheld cleaning.

Floor Cleaning: Use the full stick vacuum assembly. Select CARPET or HARD FLOOR setting. The motorized brushroll activates in carpet mode.

Handheld Cleaning: Detach the pod. Ideal for stairs, cars, furniture, and ceilings.

Brushroll On/Off: The brushroll is active only in CARPET mode and when the floor nozzle is attached.

Swivel Steering: Maneuver easily around table and chair legs.

WARNING! Always turn off and unplug the vacuum before changing attachments or performing maintenance.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty Dust Cup: Press release button, remove cup, and empty into trash. Do not overfill.

Clean Filters: Rinse the foam and felt filters with cold water every month. Allow to dry completely for 24 hours before reinstalling.

Clear Brushroll: Regularly remove hair and debris wrapped around the brushroll. Use scissors if necessary.

Check for Blockages: If suction is reduced, check the wand, hose, and nozzles for clogs.

CAUTION! Never use the vacuum without the filters installed. Do not immerse the vacuum body, pod, or electrical parts in water.

Regulatory Information

This appliance complies with FCC Part 15. Operation is subject to the condition that this device does not cause harmful interference. Copyright © SharkNinja Operating LLC. SHARK and ROCKET are registered trademarks of SharkNinja Operating LLC. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom Possible Cause Corrective Action

Vacuum won't turn on Not plugged in / Outlet issue Ensure unit is plugged into a working outlet. Check household circuit breaker.

Loss of suction Full dust cup / Clog / Dirty filters Empty dust cup. Check for blockages in nozzle, wand, and hose. Clean filters.

Brushroll not spinning Mode set to HARD FLOOR / Obstruction Switch to CARPET mode. Turn off, unplug, and remove debris from brushroll.

Vacuum is difficult to push Brushroll height / Carpet setting Ensure it's set to CARPET for high-pile rugs. Clear any tangled debris.

Unusual noise Obstruction in air path Turn off and unplug. Inspect dust cup, wand, hose, and nozzle for foreign objects.

Reset: Unplug the vacuum for 60 seconds, then plug back in.

Service: 1-800-798-7398; sharkclean.com

Shark Rocket HV301Q Series Vacuum Cleaner Manual © - All Rights Reserved 2025

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Not plugged in / Outlet issue	Ensure unit is plugged into a working outlet. Check household circuit breaker.
Loss of suction	Full dust cup / Clog / Dirty filters	Empty dust cup. Check for blockages in nozzle, wand, and hose. Clean filters.
Brushroll not spinning	Mode set to HARD FLOOR / Obstruction	Switch to CARPET mode. Turn off, unplug, and remove debris from brushroll.
Vacuum is difficult to push	Brushroll height / Carpet setting	Ensure it's set to CARPET for high-pile rugs. Clear any tangled debris.
Unusual noise	Obstruction in air path	Turn off and unplug. Inspect dust cup, wand, hose, and nozzle for foreign objects.