Shark Rocket HV292UK Vacuum Cleaner Manual

The Shark Rocket HV292UK is a lightweight, corded stick vacuum cleaner with powerful suction, a motorised brushroll for deep carpet cleaning and hard floor pickup, a detachable pod for handheld cleaning, multiple attachments for above-floor cleaning, and a large dust cup with easy-empty mechanism. It features a swivel steering for easy manoeuvrability, a 2-year warranty, and is designed for versatile home cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Parts 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Main vacuum body with motor, Motorised brushroll, Detachable handheld pod, Dust cup with release button, Swivel steering handle, Cord wrap hooks, On/off switch, Attachment holder.

Feature	Description
Motorised brushroll	Deep cleans carpets and picks up debris on hard floors
Detachable handheld pod	Converts to a portable vacuum for stairs, upholstery, and cars
Large capacity dust cup	Easy-empty mechanism with one-touch release
Swivel steering	Provides excellent manoeuvrability around furniture
Multiple attachments	Includes crevice tool, dusting brush, and upholstery tool
Cord wrap hooks	Integrated cord storage for neat winding
On/off switch	Located on the handle for easy access
Lightweight design	Easy to carry and use for extended periods
Attachment holder	Stores tools on the vacuum for convenience
Power cord	Long reach for cleaning large areas without frequent unplugging

Assembly & Setup

Unpack all parts and inspect for damage. Assemble before first use.

Attach the handle: Insert the handle into the top of the main vacuum body until it clicks into place.
Install the floor nozzle: Align the nozzle with the front of the vacuum and push until it locks.
Attach the hose (if using handheld mode): Connect the hose to the pod and ensure it is secure.
Plug into a standard UK wall socket (220-240V, 50Hz).

WARNING! Ensure the vacuum is unplugged during assembly. Do not force parts together.

First-Time Use

Before first use, fully unwind the power cord and perform a test run.

Select cleaning mode: For floors, use the motorised brushroll. For above-floor cleaning, detach the pod.
Turn on: Press the on/off switch on the handle.
Adjust suction (if applicable): Some models have a suction control slider on the handle.
Empty dust cup: After use, press the release button to empty the collected debris.

CAUTION! Keep hair, loose clothing, and fingers away from the brushroll while the vacuum is running.

Specifications

Model: Shark Rocket HV292UK.
Type: Corded stick vacuum with handheld option.
Power: 700W motor.
Dust Cup Capacity: 0.7 litres.
Cord Length: 7.5 metres.
Weight: Approximately 3.2 kg.
Attachments: Crevice tool, dusting brush, upholstery tool.
Filtration: Washable foam and felt filter.
Warranty: 2 years (register online).
Power Source: 220-240V AC, 50Hz.

Controls and Parts

Main Body: On/off switch, Dust cup release button, Handle with swivel steering, Cord wrap hooks. Handheld Pod: On/off switch, Hose connector, Attachment dock.

Attachments: Crevice tool (for tight spaces), Dusting brush (for delicate surfaces), Upholstery tool (for sofas and curtains).

Operation: Plug in, turn on switch, push vacuum forward and back. To detach pod, press release button near the handle. To empty dust cup, hold over bin and press release button. To clean filter, remove and wash as per instructions.

Using Attachments

For above-floor cleaning, detach the handheld pod and connect desired tool.

Turn off and unplug the vacuum before changing attachments.
Detach pod: Press the release button near the handle and lift off.
Connect tool: Insert the tool into the end of the hose or pod until it clicks.
Turn on and clean: Use the tool on stairs, upholstery, ceilings, or car interiors.

Tip: Store attachments on the dock when not in use to keep them handy.

Cleaning Modes

Two main modes: Floor cleaning and Handheld cleaning.

Floor cleaning: Use the full vacuum with motorised brushroll engaged. Ideal for carpets and hard floors.
Handheld cleaning: Detach the pod and connect a tool. Use for stairs, furniture, and tight spaces.
Suction control: Some models allow you to reduce suction for delicate rugs.
Brushroll on/off: A switch may be available to turn off the brushroll for hard floors.

WARNING! Do not use the motorised brushroll on delicate surfaces like silk rugs. Always check manufacturer labels.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

Empty dust cup after each use.
Clean filters monthly: Remove foam and felt filters, rinse under cold water, and air dry for 24 hours before reinstalling.
Clear brushroll tangles: Regularly remove hair and fibres wrapped around the brushroll.
Check for blockages: If suction reduces, inspect hose, nozzle, and dust cup for obstructions.
Store properly: Wind cord around hooks and store in a dry place.

CAUTION! Always unplug before maintenance. Do not use the vacuum without filters installed.

Regulatory Information

This appliance complies with relevant UK and EU safety standards. The crossed-out wheelie bin symbol indicates separate collection for electrical waste. For product registration, warranty details, and support, visit www.sharkclean.co.uk or contact Shark customer service at 0800 862 6033 (UK).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Not plugged in / faulty socket	Check plug and socket; try a different outlet.
Loss of suction	Full dust cup / clogged filter / blockage	Empty dust cup; clean filters; check hose and nozzle for blockages.
Brushroll not spinning	Tangled debris / faulty drive belt	Turn off, unplug, and clear brushroll; inspect belt for damage.
Vacuum overheats	Blockage / filter needs cleaning	Turn off, unplug, let cool. Clear any blockage and clean filters.
Handheld pod not detaching	Release button not fully pressed	Press the release button firmly while lifting the pod.

Reset: Unplug for 10 minutes if motor overheats, then restart.

Service: For repairs not covered under warranty, contact authorised Shark service centres.