Shark Rocket HV292CB Vacuum Cleaner Manual

The Shark Rocket HV292CB is a lightweight, corded stick vacuum cleaner featuring DuoClean technology with a soft roller for large debris and a bristle brush for deep carpet cleaning, Anti-Allergen Complete Seal technology, LED headlights, a detachable pod for portable cleaning, multiple attachments, and a swivel steering for maneuverability. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Parts 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Motorized floor nozzle with DuoClean brushes, detachable pod, wand, handle with controls, dust cup with Anti-Allergen seal, LED headlights, and accessory attachments.

FeatureDescription
DuoClean TechnologyCombines soft roller and bristle brush for all floor types
Anti-Allergen Complete SealTraps 99.9% of dust and allergens inside the vacuum
LED HeadlightsIlluminates dark areas under furniture
Detachable PodConverts to a portable hand vacuum
Swivel SteeringProvides enhanced maneuverability around obstacles
Large Dust CupEasy-empty, washable container
Accessory StorageBuilt-in caddy for storing attachments on the wand
Power Cord25-foot cord with cord wrap
ON/OFF SwitchLocated on the handle for easy operation
Brushroll ControlAllows brushroll to be turned on/off for delicate rugs

Assembly & Setup

Unpack and inspect all contents. Assemble before first use.

  1. Attach the wand: Insert the wand into the floor nozzle until it clicks securely.
  2. Attach the handle: Slide the handle onto the top of the wand and press until it locks.
  3. Install the dust cup: Ensure it is properly seated and locked into the pod.
  4. Attach accessories: Store crevice tool, dusting brush, and upholstery tool in the caddy.
  5. Plug into a standard 120V AC outlet.

WARNING! Ensure all parts are securely connected before operation to prevent injury or damage.

First-Time Use

Before cleaning, perform a quick check.

  1. Clear the area: Remove small objects, cords, and loose rugs that could be sucked in.
  2. Check brushroll: Ensure it spins freely and is free of hair or debris.
  3. Select floor setting: Use the brushroll switch for hard floors (ON) or delicate rugs (OFF).
  4. Power on: Press the ON/OFF switch on the handle.
  5. Begin cleaning: Use slow, overlapping passes for best results.

CAUTION! Do not vacuum wet spills, burning materials, or sharp objects.

Specifications

Controls and Parts

Main controls located on the handle and floor nozzle.

Handle: ON/OFF switch, brushroll ON/OFF button, release button for pod detachment.

Floor Nozzle: DuoClean brushroll, LED lights, swivel neck, suction opening.

Pod: Contains motor, dust cup, and filter. Detaches for handheld use.

Wand: Lightweight aluminum tube with accessory caddy.

Attachments: Connect to the pod or wand for above-floor cleaning.

Using Attachments

For above-floor cleaning, detach the pod from the floor nozzle.

  1. Detach the pod: Press the release button on the handle and lift the pod off the wand.
  2. Attach tool: Press the desired accessory onto the front of the pod.
  3. Clean: Use the crevice tool for tight spaces, dusting brush for shelves, upholstery tool for furniture.
  4. Reattach: To return to floor cleaning, reconnect the pod to the wand and floor nozzle.

Tip: Store attachments in the caddy for quick access.

Cleaning Modes

Two primary modes: Floor cleaning and handheld cleaning.

  1. Floor Cleaning: Use the fully assembled vacuum with the floor nozzle. The brushroll can be turned ON for carpets or OFF for hard floors and delicate rugs.
  2. Handheld Cleaning: Detach the pod and attach a tool for stairs, furniture, or cars.
  3. Suction Control: Automatic adjustment based on floor type; no manual settings required.
  4. LED Lights: Automatically illuminate when the vacuum is powered on.

WARNING! Do not use the handheld pod to vacuum liquids or fine powders.

Maintenance & Care

Regular maintenance ensures optimal performance.

  1. Empty dust cup: Press the release button and empty after each use or when full.
  2. Clean filters: Rinse the foam and felt filters every 3 months; air dry completely for 24 hours before reinstalling.
  3. Clear brushroll: Regularly remove hair and fibers wrapped around the brushroll.
  4. Check for blockages: Inspect the hose, wand, and nozzle if suction decreases.
  5. Store properly: Wrap the cord around the cord hooks and store in a dry place.

CAUTION! Always unplug the vacuum before performing any maintenance.

Safety Information

Read all safety instructions before use.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © SharkNinja Operating LLC. All trademarks are owned by SharkNinja. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower outlet/switchCheck outlet; ensure ON/OFF switch is pressed; check cord for damage.
Loss of suctionFull dust cup/blockageEmpty dust cup; check hose, wand, and nozzle for clogs; clean filters.
Brushroll not spinningHair/debris wrapUnplug and clear brushroll; ensure brushroll switch is ON.
Vacuum tips overWand not lockedEnsure wand is fully inserted and clicked into floor nozzle.
Unusual noiseBlockage or foreign objectUnplug and inspect for obstructions in suction path.

Reset: Unplug for 60 seconds, then plug back in.

Service: 1-800-798-7398; sharkclean.com

Shark Rocket HV292CB Vacuum Cleaner Manual © - All Rights Reserved 2025