Shark Rocket HV290 series Vacuum Cleaner Manual

The Shark Rocket HV290 series is a lightweight, corded stick vacuum cleaner featuring DuoClean technology, Anti-Allergen Complete Seal, a removable pod for handheld cleaning, multiple attachments, and a swivel steering head. It is designed for cleaning carpets, hard floors, and above-floor surfaces. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Parts 6. Cleaning Modes & Attachments 7. Emptying the Dust Cup 8. Maintenance & Filter Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Motorized floor nozzle with DuoClean brushes, removable handheld pod, wand, dust cup with Anti-Allergen Seal, crevice tool, dusting brush, upholstery tool, and storage caddy.

Feature	Description
DuoClean Technology	Combines a soft roller for hard floors and a bristle brush for carpets
Anti-Allergen Complete Seal	Traps 99.9% of dust and allergens inside the vacuum
Removable Pod	Detaches from stick for handheld cleaning of stairs and upholstery
Swivel Steering	Provides maneuverability around furniture and obstacles
LED Lights	On floor nozzle illuminate dust and debris in dark areas
Large Dust Cup	Easy-empty, bagless container
Attachments	Crevice tool, dusting brush, and upholstery tool included
Power Cord	25-foot cord with cord wrap hooks
Washable Filters	Foam and felt filters can be rinsed and reused
Storage Caddy	Holds vacuum and all attachments

Assembly & Setup

Unpack all parts and inspect contents. Assemble on a flat, stable surface.

Insert wand into floor nozzle: Align arrows and push until it clicks.
Attach handheld pod to wand: Align pod with top of wand and push until secure.
Connect hose to pod: Ensure hose connector is fully seated.
Attach desired tool: Press crevice tool, dusting brush, or upholstery tool onto end of hose or pod.
Plug power cord into wall outlet.

WARNING! Ensure vacuum is unplugged during assembly. Do not force connections.

First-Time Use

Before first use, ensure all filters are installed correctly.

Check filters: Open pod lid and verify foam and felt filters are in place.
Select cleaning mode: For floors, use floor nozzle. For above-floor cleaning, detach pod.
Power on: Press foot pedal on floor nozzle or power button on pod.
Adjust suction: Use suction control slider on pod for different surfaces.
Begin cleaning: Push vacuum forward on floor; use swivel steering to navigate.

CAUTION! Keep hair, loose clothing, fingers, and feet away from brushes and openings.

Specifications

Model Series: HV290 (e.g., HV290, HV291, HV292).
Type: Corded stick vacuum with handheld pod.
Technology: DuoClean, Anti-Allergen Complete Seal.
Attachments: Crevice tool, dusting brush, upholstery tool.
Cord Length: 25 feet.
Dust Cup Capacity: 0.7 dry quarts.
Filters: Washable foam and felt filters.
Power Source: 120V AC, 60Hz.
Weight: Approximately 8.5 lbs.

Controls and Parts

Main parts: Floor nozzle, wand, handheld pod, dust cup, filters, attachments.

Floor Nozzle: Power foot pedal, brush roll switch, LED lights, swivel neck. Handheld Pod: Power button, suction control slider, hose connector, dust cup release button. Wand: Connects nozzle to pod; release button for detaching.

Operation: Press power to start. Use suction control for carpets (max) or delicate surfaces (min). Turn off brush roll on hard floors if needed.

Cleaning Modes & Attachments

Use appropriate mode and tool for each surface.

Floor Cleaning: Keep pod attached to wand and nozzle. Power on with foot pedal.
Above-Floor Cleaning: Detach pod from wand. Attach hose and desired tool.
Under Furniture: Use crevice tool or floor nozzle with swivel steering.
Upholstery & Stairs: Use handheld pod with upholstery tool.
Dusting: Use dusting brush for shelves, blinds, and electronics.

Tip: Clear area of large debris before vacuuming to prevent clogs.

Emptying the Dust Cup

Empty dust cup when full or after each use for optimal suction.

Turn off and unplug vacuum.
Press dust cup release button on pod.
Hold dust cup over trash can; press bottom latch to open door.
Tap gently to empty debris.
Close door until it clicks; reattach dust cup to pod.

WARNING! Do not use vacuum without dust cup properly installed.

Maintenance & Filter Care

Regular maintenance ensures peak performance.

Clean Brush Roll: Unplug vacuum. Remove floor nozzle; clear hair and fibers from brush roll.
Wash Filters: Rinse foam and felt filters under water every month. Air dry for 24 hours before reinstalling.
Check for Clogs: Inspect hose, wand, and nozzle if suction is weak.
Wipe Exterior: Use dry cloth to clean pod and nozzle.

CAUTION! Do not operate with wet filters. Ensure all parts are completely dry before use.

Regulatory Information

This appliance complies with FCC Part 15 Subpart B. Operation is subject to conditions that it does not cause harmful interference. Copyright © SharkNinja Operating LLC. Shark and Rocket are registered trademarks. For support, visit sharkclean.com or contact 1-800-798-7398.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Not plugged in / power issue	Check wall outlet and power cord connection.
Loss of suction	Full dust cup / clog / dirty filters	Empty dust cup; check for clogs in hose and nozzle; clean filters.
Brush roll not spinning	Obstruction / drive belt	Unplug and clear debris from brush roll; inspect belt if accessible.
Vacuum tips over	Wand not locked / attachment issue	Ensure wand is fully clicked into floor nozzle and pod.
Overheating	Clog / full dust cup	Turn off and unplug; let cool; empty dust cup and clear obstructions.

Reset: Unplug for 60 minutes if motor overheats.

Service: 1-800-798-7398; sharkclean.com